<?xml-model href='http://www.tei-c.org/release/xml/tei/custom/schema/relaxng/tei_all.rng' schematypens='http://relaxng.org/ns/structure/1.0'?><TEI xmlns="http://www.tei-c.org/ns/1.0">
	<teiHeader>
		<fileDesc>
			<titleStmt><title level='a'>Electrically induced directional ion migration in two-dimensional perovskite heterostructures</title></titleStmt>
			<publicationStmt>
				<publisher>CellPress</publisher>
				<date>05/01/2024</date>
			</publicationStmt>
			<sourceDesc>
				<bibl> 
					<idno type="par_id">10503851</idno>
					<idno type="doi">10.1016/j.matt.2024.03.005</idno>
					<title level='j'>Matter</title>
<idno>2590-2385</idno>
<biblScope unit="volume">7</biblScope>
<biblScope unit="issue">5</biblScope>					

					<author>Jee Yung Park</author><author>Yoon Ho Lee</author><author>Md Asaduz Zaman Mamun</author><author>Mir Md Fahimul Islam</author><author>Shuchen Zhang</author><author>Ke Ma</author><author>Aalok Uday Gaitonde</author><author>Kang Wang</author><author>Seok Joo Yang</author><author>Amy Marconnet</author><author>Jianguo Mei</author><author>Muhammad Ashraful Alam</author><author>Letian Dou</author>
				</bibl>
			</sourceDesc>
		</fileDesc>
		<profileDesc>
			<abstract><ab><![CDATA[Understanding ion migration in two-dimensional (2D) perovskite materials is key to enhancing halide perovskite device performance and stability. However, prior studies have been primarily limited to heat and light induced ion migration. In this work, to investigate electrically induced ion migration in 2D perovskites, we construct a high-quality single crystal 2D perovskite heterostructure device platform with near defect-free van der Waals contact. While achieving real-time visualization of halide anions migrating towards the positive bias, defined here as directional ion migration, we also uncover the unique behavior of halide anions inter-diffusing towards the opposite direction under prolonged bias. Confocal microscopy imaging reveals a halide migration channel that aligns with the crystal and heterojunction edges. After a sustained ion migration, stable junction diodes exhibiting up to ~1000-fold forward to reverse current ratio are realized. This study unveils important fundamental insights on halide migration under electrical bias, paving the way towards high-performance devices.]]></ab></abstract>
		</profileDesc>
	</teiHeader>
	<text><body xmlns="http://www.tei-c.org/ns/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xlink="http://www.w3.org/1999/xlink">
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Introduction</head><p>Halide perovskite optoelectronics have shown remarkable progress over the past decade, attributed to their solution-processability and significant optoelectronic properties. <ref type="bibr">[1]</ref><ref type="bibr">[2]</ref><ref type="bibr">[3]</ref> However, their inherent instability due to the ionic nature of the soft halide perovskite lattice is an obstacle for long-term use, particularly because of ion migration. <ref type="bibr">4,</ref><ref type="bibr">5</ref> This can be triggered by factors such as heat, light, electric field, or current during operation, leading to issues such as current-voltage hysteresis, transport layer doping, and accelerated material degradation. <ref type="bibr">[6]</ref><ref type="bibr">[7]</ref><ref type="bibr">[8]</ref><ref type="bibr">[9]</ref> Additionally, mobile ions can cause further problems like phase segregation in mixed-halide systems. <ref type="bibr">[10]</ref><ref type="bibr">[11]</ref><ref type="bibr">[12]</ref> To overcome these challenges, two-dimensional (2D) perovskites with hydrophobic organic cations have emerged as a more stable alternative to three-dimensional (3D) perovskites. <ref type="bibr">[13]</ref><ref type="bibr">[14]</ref><ref type="bibr">[15]</ref> Recently, efficient optoelectronic devices utilizing quasi-2D perovskites or 2D-3D perovskite heterostructures have been demonstrated, spurring innovations in this field and heightening interest in understanding ion migration behavior, particularly in 2D perovskites. <ref type="bibr">16,</ref><ref type="bibr">17</ref> Research on ion migration has been mostly focused on single component polycrystalline thin films or single crystals which pose challenges in direct visualization of ion movement under an external stimulus. <ref type="bibr">18,</ref><ref type="bibr">19</ref> Heterostructures can work as a promising platform, offering clearer visualization and allowing more precise quantification through observation of ion migration across interfaces. While previous works utilizing heterostructures have mainly focused on heat or light induced migration and phase segregation, ion migration in heterostructures under electric bias has not been well investigated, due to the challenges in reliable device fabrication, particularly lacking studies based on 2D perovskites. <ref type="bibr">[20]</ref><ref type="bibr">[21]</ref><ref type="bibr">[22]</ref><ref type="bibr">[23]</ref><ref type="bibr">[24]</ref> In this work, we construct high-quality 2D perovskite single crystal heterostructure devices with van der Waals contact established through multi-step dry transfer. This approach allows us to visualize realtime migration of halide anions towards the positive bias, an observation we define as directional ion migration, revealing new insights into the behavior of halide anions under electric bias. Key findings include the discovery of vacancy-induced interdiffusion against bias direction and an analysis of preferred ion migration pathways, showing that ion migration is not only directional but also favored along the edges of single crystal sheets, which is completely different from thermally induced ion diffusion. These directional ion migration behaviors are also validated through a simulation which replicates similar ion movement under the influence of electric field. Moreover, ion migration in 2D perovskite heterostructure devices results in a unique diode behavior, with particularly amplified performance in double junctions. Our study establishes important insights regarding electrically induced ion migration with a simple yet powerful heterostructure platform, which can be further utilized for potential in-depth studies and device integration.</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Results and Discussion</head></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Fabrication of single crystal heterostructure devices</head><p>Heterostructures of single crystals are fabricated through a step-by-step dry transfer of 2D perovskite single crystal sheets incorporating phenylethyl ammonium (PEA) cations, which are acquired via a floating growth method that enables the synthesis of large area, high-quality sheets. <ref type="bibr">25</ref> As depicted in Figure <ref type="figure">1A</ref>, a mildly heated saturated precursor solution is dropped onto a glass plate, initiating the crystallization of single crystal sheets at the air-solution interface. Crystal sheets are then retrieved with polydimethylsiloxane (PDMS) attached to a glass slide and dried in a vacuum chamber for dry transfer preparation. Three different crystal sheets, Br n=1 ((PEA)2PbBr4), I n=1 ((PEA)2PbI4), and I n=2 ((PEA)2(MA)Pb2I7) were synthesized as building blocks for the heterostructures.  Further development of these pristine heterostructures into a device platform involves applying a unique electrode dry-transfer method, as illustrated in Figure <ref type="figure">2A</ref>. Two Au electrodes with a channel gap of 20 ~ 40 &#181;m and attached to polymethyl methacrylate (PMMA), are dry transferred onto the pristine heterostructure. This transfer is executed using a thermal release tape, which requires heating to lose adhesion. <ref type="bibr">26,</ref><ref type="bibr">27</ref> The transfer process is conducted with great precision to ensure that the junction part is strategically positioned in the channel between the two electrodes and that each Au electrode can establish contact with the pre-patterned Ti/Au pads. This channel gap, which uncovers the junction area, will later serve as a window for observing ion movement. The Ti/Au pads play a critical role in forming reliable contact with the electrical measurement probes, ensuring consistent results even with repeated measurements. Meanwhile, the PMMA functions as a transparent protection layer, isolating the interference of moisture and oxygen, increasing the overall stability of the device. Figure <ref type="figure">2B</ref> provides a cross-sectional schematic representation of the device's configuration after the completion of all dry-transfer steps, accompanied with the top view of a real device with low magnification shown in Figure <ref type="figure">S5</ref>.</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Electrically induced directional halide migration</head><p>Fabricated heterostructure devices were induced with electric bias to investigate the ion migration behavior. Ion migration was analyzed through real-time PL imaging of the junction area. Movement of bromide anions into the iodide region, or vice versa, would result in alloy formation, giving rise to a new PL emission peak that locates between the pure bromide and iodide perovskites emission wavelength. Two different Br n=1 -I n=1 heterostructure devices with a similar configuration was prepared to contrast the ion migration behavior under varying directions of electric bias. An electric bias of 5 V was applied for 5 minutes to both devices, as shown in Figures <ref type="figure">2C-F</ref>, the only distinction being the direction of the bias. The heterostructures did not show any notable changes with electric bias lower than 5 V. Figures <ref type="figure">2C</ref> and<ref type="figure">2E</ref> show optical and PL images of the heterostructure devices before introducing bias. Figures 2D and 2F are the PL images following the electric bias treatment, and corresponding confocal PL mapping images are included in Figures <ref type="figure">S6</ref> and<ref type="figure">S7</ref>. Notably, when the electric field is directed towards Br n=1, no significant alteration in the PL image is observed before and after the bias, as observed in Figures <ref type="figure">2C</ref> and<ref type="figure">2D</ref>. However, in the opposite case, a pronounced change in PL image is observed as migration of iodide anion is triggered towards the Br n=1 side due to the electric stimulus, forming an I/Br alloy. As iodide anions carry a negative charge, they can only migrate to the Br n=1 area only if the electric field is oriented towards the I n=1 side. On the other hand, bromide anions can only migrate to the I n=1 area if the electric field is oriented towards the Br n=1 side. In this work, we define such movement of halide anion as directional ion migration, where the ions move towards a specific direction guided by the induced electric field. It should be acknowledged that the movement of bromide anions in Figure <ref type="figure">2D</ref> is happening but is not observable as the Br n=1 sheet is covered by the I n=1 sheet in the junction area. Thus, the movement of iodine was only of focus here for varying electric field directions, considering that band shift is more abrupt with iodine moving to the bromide area and photoluminescence quantum yield (PLQY) is generally higher for iodine rich phases. Clear demonstration of directional ion migration behavior in heterostructures when subjected to electric stimuli can also be confirmed through a real-time video recording of PL image evolution shown in Supplemental Videos 1 and 2. Furthermore, even after the external bias was turned off after ion migration, the Br/I alloy PL emissions largely persisted as seen in Figure <ref type="figure">S8</ref> showing only partial relaxation of anions back towards their origin.</p><p>To further investigate the directional migration behavior under a more potent electric stimulus, a larger bias was applied for an extended time duration. induced with an electric bias (positive bias on the I n=1 side and negative bias on the Br n=1 side), this causes both iodide and bromide anions to migrate towards the positive bias, simultaneously forming a Br/I alloy phase. Then, when a strong enough bias is sustained, continuous ion migration leads to increased bromide vacancies in vicinity of the anode. This creates a large enough gradient of halide vacancy concentration within the heterostructure, instigating a vacancy-driven interdiffusion of iodide anions to fill the voids in the Br n=1 sheet. It can also be understood that halide oxidation and reabsorption may play a role as well according to previous studies. <ref type="bibr">10,</ref><ref type="bibr">11</ref> Consequently, this results in the formation of Br/I alloy phase near the anode and the gradual evolution showing the change in spatial distribution of Br/I alloy PL emission in Supplemental Video 3 supports the proposed ion migration behavior as well.</p><p>Ion mobility values and diffusion coefficients were calculated and compared with previous reports that quantify these parameters using various platforms featuring halide perovskite materials. The interrelation between ion mobility and diffusion coefficient is established by the following Einstein relation: <ref type="bibr">28,</ref><ref type="bibr">29</ref> </p><p>where &#119863; is diffusion coefficient, &#120583; is ion mobility, kB is Boltzmann constant, T is absolute temperature, q is electrical charge on the electron, &#119907; is the ion drift velocity and &#119864; is the electrical field applied to the material. Figure <ref type="figure">S11</ref> provides a schematic on how ion mobility and diffusion coefficient was calculated from the Br n=1 -I n=1 heterostructure along with the distribution of calculated values. Figure <ref type="figure">S12a</ref> compares this work's ion mobility values with earlier studies that investigate ion migration in 3D perovskite devices. <ref type="bibr">20,</ref><ref type="bibr">22,</ref><ref type="bibr">[30]</ref><ref type="bibr">[31]</ref><ref type="bibr">[32]</ref> Meanwhile, Figure <ref type="figure">S12b</ref> compares diffusion coefficient values with previous studies that investigate ion migration in 2D and 3D perovskites. <ref type="bibr">23,</ref><ref type="bibr">[33]</ref><ref type="bibr">[34]</ref><ref type="bibr">[35]</ref><ref type="bibr">[36]</ref> Heightened mobility and diffusion coefficient values in this work can be attributed to the enhanced electrical current densities passing through the crystals enabled by the high-quality van der Waals contact devices, resulting in higher vacancy/defect densities. High current levels were recorded during ion migration experiments (Figure <ref type="figure">S13</ref>). Momentum of electrons flowing through the material transferred to the lattice can lead to electromigration, increasing defect density in the lattice, subsequently contributing to elevated mobility and diffusion coefficient values in the heterostructure devices. 37</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Halide ion migration pathways</head><p>As observed in Figures 2G-2I, it's important to recognize that ion migration is not a random process; rather, it typically originates from the corners near the junction area and favors propagation along the edge region over the bulk region of the crystal sheets. To further uncover the effects that electric bias may have on the edge region and why it may facilitate an ion migration pathway, an analysis of electric current in the heterostructure devices was performed. Figure <ref type="figure">S18</ref> shows the optical and PL image of a device platform created specifically to perform spatial mapping of electric current flow in a single crystal sheet. In these mappings, the edge regions were revealed to be more conductive, exhibiting higher current values compared to the bulk region. An initially surged across the interface enabled by the active ion migration driven by the initial electric field, followed by a slight decline as ions migrate laterally. In contrast, point 2 displayed a consistent and gradual but relatively slower increase in bromide concentration, attributed to a weaker electric field. Figure <ref type="figure">S23</ref> presents the iodide concentration evolution, revealing an accumulation against the induced bias before inter-diffusion after a certain time. Initially hindered by an unfavorable electric field, iodide ions eventually migrated when vacancies on the opposite side induced a sufficient screening effect, coupled with a steepened anion concentration gradient across the junction.</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Post-migration diode behavior</head><p>When the heterostructure devices were applied with a consistent bias in a single direction as illustrated in Figure <ref type="figure">4A</ref>, a unique change in device characteristics was revealed. Initially, these devices displayed a standard current-voltage (I-V) curve, akin to that of a typical halide perovskite material with symmetric electrodes. Yet, under a sustained bias of 3 V, they began to demonstrate a diode-like behavior, as depicted in shallow energy levels in 3D halide perovskites as well as 2D perovskites. <ref type="bibr">41,</ref><ref type="bibr">42</ref> Thus, the asymmetric nature of these point defects (interstitials and vacancies) across the junction may lead to self-doping, resulting in the formation of a P-N junction. <ref type="bibr">43</ref> To further investigate how the diode behavior rises, device simulations were performed using analytical equations (see Methods for details). Figures <ref type="figure">4F</ref> and<ref type="figure">4G</ref> show the fitted device simulation I-V curves for reverse bias and forward bias, respectively. As the diode operates at a significantly lower turn-on voltage compared to conventional diodes while showing higher reverse leakage currents, this can be attributed to the soft breakdown of the diode. <ref type="bibr">44,</ref><ref type="bibr">45</ref> As shown in Figure <ref type="figure">4H</ref>, electron and hole hopping can occur during forward and reverse biasing due to an abundance of point defects in the junction. The asymmetricity of the current in both directions is also contributed by the disparity in the bandgap between the two components.</p><p>While there are reports of ion migration induced diode behavior in 3D halide perovskites, often referred to as poling effects, the 2D perovskite heterostructures examined in this study set themselves apart by consistently maintaining this state, even with repeated cycles, as demonstrated in Figure <ref type="figure">S26</ref>. <ref type="bibr">4,</ref><ref type="bibr">46</ref> This contrasts with 3D perovskite materials, which struggle to sustain the poled state over extended periods.</p><p>Due to the organic cation barriers between inorganic layers, reversing active ion migration across distinct layers in 2D perovskite materials isn't feasible. Overall, as previous poling studies are rather a display of pseudo-junctions from single materials, 2D perovskite heterostructures in this work are inherent junctions of two layers with different halide species which transform into a junction diode. Moreover, double junction heterostructures displayed heightened diode characteristics, exhibiting a remarkable ~1000-fold forward and reverse current ratio at 4V as shown in Figures <ref type="figure">4D</ref> and<ref type="figure">4E</ref>, pointing to the potential for enhancing diode performance by tweaking heterostructure configurations. The junction diodes created also displayed evidence of photovoltaic effect with a clear open-circuit voltage under light excitation as displayed in Figure <ref type="figure">S27</ref>. The stability of these junctions, coupled with the adaptable diode properties through heterostructure setup, reveals a promising avenue for further exploration in semiconductor device application.</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Conclusion</head><p>In summary, we have fabricated a 2D perovskite single crystal heterostructure device with Van der Waals contact, achieved through a multi-step dry transfer technique to conduct a comprehensive study of ion migration under the influence of an electric bias.</p><p>Accompanied by real-time visualization of PL and confocal spatial mapping of Br/I alloy phases, highly directional ion migration behavior was observed. Heterostructure under different electric bias conditions elucidated not only directional ion migration but also vacancy-driven interdiffusion of anions in an electrically unfavored direction due to sufficient vacancy accumulation. It was also revealed that ion migration favors the edge regions of crystal sheets, attributed to higher electrical conductivity in the edge.</p><p>We further corroborated these ion migration patterns through simulations that assessed the evolution of electric fields and ion concentrations in different sections of the heterostructure. Additionally, the transformation of the heterostructure into a stable junction diode was another significant outcome, observed after sustained directional ion migration, leading to improved diode characteristics in double junction heterostructure devices. Overall, our research sheds light on the dynamics of electrically stimulated ion migration and its implications for the ionic/electrical properties of devices, offering a simple yet potent heterostructure framework that paves the way for further advanced fundamental studies as well as potential applications in optoelectronics, integrated circuits, and neuromorphic computing.</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Experimental Procedures</head><p>Resource Availability</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Lead contact</head><p>Further information and requests for resources should be directed to and will be fulfilled by the lead contact, Letian Dou (dou10@purdue.edu).</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Materials availability</head><p>This study did not generate new unique materials.</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Data and code availability</head><p>All data are available upon reasonable request.</p><p>Preparation of 2D perovskite single crystal heterostructures: The floating growth method was used to obtain 2D halide perovskite nanocrystals. Specifically, PbI2 or Single crystal sheets were picked up by PDMS from the solution surface. Single crystal sheets were then transferred from the PDMS to the desired substrate and constructed into a heterostructure through point-to-point transfer using an in-house built transfer equipment.</p><p>Single crystal and heterostructure device fabrication: The Ti (4 nm) /Au (30 nm) electrode for contact pads on Si/SiO2 (300 nm) wafer were prepared by conventional photolithography and thermal evaporation method. The 2D single crystals on PDMS substrates were transferred between the contact pad electrodes and then a PMMA film with Au electrodes were transferred on these crystals using transfer stage below 85&#176;C. For PMMA film with Au electrodes, following the patterning process of photoresist (AZ 1518), a 130 nm Au was thermally evaporated onto the Si/SiO2 (300 nm) wafer, followed by hot acetone washing to remove the photoresist. Afterward, the self-assembly monolayer surface treatment of Hexamethyldisilane (HMDS) was applied in vacuum chamber. Subsequently, a PMMA solution was spin-coated on top of the Au electrodes and annealed at 180&#176;C for 10 min. The Au electrodes / PMMA layer were lifted off from substrate and transferred on to the crystals by using thermal release tapes.</p><p>Optical microscopy measurements: All bright-field images were collected with a custom Olympus BX53 microscope. All PL images were taken using a X-Cite Series 120 Q lamp as the excitation source. PL spectra were collected with a SpectraPro HRS-300 spectrometer.</p><p>Confocal photoluminescence (PL) mapping: A Leica SP8 inverted laser scanning confocal microscope with a 405 nm laser line as the excitation wavelength was used for the PL mapping of the bromide and iodide layers in the vertical heterostructure.</p><p>Scanning electron microscopy (SEM) imaging: SEM and EDX mapping images were obtained using a Hitachi S-4800 cold SEM microscope with EDX.</p><p>Crystal thickness measurements: The height profile of the crystals was measured using stylus profilometer (DektakXT).</p><p>Electrical measurements: The measurement of current-voltage characteristics and bias input for single-crystal devices and single-crystal heterostructure devices were conducted under ambient conditions using Keithley 2400 and Keithley 4200-SCS semiconductor parametric analyzers.</p><p>X-ray Diffraction (XRD) pattern measurements: XRD was measured using a powder X-ray diffractometer (Panalytical Empyrean) with a Cu K&#945; source.   (L) PL image (inset) and PL spectra captured from the heterostructure junction area.  </p></div></body>
		</text>
</TEI>
