An official website of the United States government
Vascular restenosis is a major complication in recanalized arteries. Nanoparticles (NPs) have shown great promise as delivery systems in advancing strategies to treat such vascular anomalies. By enabling precise targeting, NPs can overcome the challenges of low drug efficacy and off-target effects. Here we present a biomimetic in vitro platform comprised of 3D bioprinting, nanomaterials, and perfusion technologies, to study the use of NP targeting to address endothelial overgrowth. We bioprinted 3D vascular channels at high fidelity, using gelatin methacrylate as bioink, with artery-like stiffness. Human endothelial cells (ECs) were used to endothelialize the printed channels. GFP-labelled superparamagnetic iron oxide NPs (SPIONs), loaded with the Rapamune anti-proliferative drug, were perfused through the bifurcated artery model at physiological rate. Computational modeling predicted greatest level of alterations in wall shear stress in the conduit’s junction with the artery, identifying this region prone to restenosis. A neodymium disc magnet was embedded in the printed tissue to attract the therapeutic SPIONs to the region of high risk. In vitro dynamic culture was conducted for 2 wks. We assessed cell viability, proliferation, and function using AlamarBlue and immunohistochemistry. Results showed significant targeted effect of NP delivery in reducing EC overgrowth. This platform enables design of precise targeting of therapeutics to treat a variety of cardiovascular diseases at a high spatial and temporal control.
more »
« less
Targeted Rapamycin Delivery via Magnetic Nanoparticles to Address Stenosis in a 3D Bioprinted in Vitro Model of Pulmonary Veins
Abstract Vascular cell overgrowth and lumen size reduction in pulmonary vein stenosis (PVS) can result in elevated PV pressure, pulmonary hypertension, cardiac failure, and death. Administration of chemotherapies such as rapamycin have shown promise by inhibiting the vascular cell proliferation; yet clinical success is limited due to complications such as restenosis and off‐target effects. The lack of in vitro models to recapitulate the complex pathophysiology of PVS has hindered the identification of disease mechanisms and therapies. This study integrated 3D bioprinting, functional nanoparticles, and perfusion bioreactors to develop a novel in vitro model of PVS. Bioprinted bifurcated PV constructs are seeded with endothelial cells (ECs) and perfused, demonstrating the formation of a uniform and viable endothelium. Computational modeling identified the bifurcation point at high risk of EC overgrowth. Application of an external magnetic field enabled targeting of the rapamycin‐loaded superparamagnetic iron oxide nanoparticles at the bifurcation site, leading to a significant reduction in EC proliferation with no adverse side effects. These results establish a 3D bioprinted in vitro model to study PV homeostasis and diseases, offering the potential for increased throughput, tunability, and patient specificity, to test new or more effective therapies for PVS and other vascular diseases.
more »
« less
- Award ID(s):
- 2044657
- PAR ID:
- 10504357
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Science
- Volume:
- 11
- Issue:
- 26
- ISSN:
- 2198-3844
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
A current challenge in 3D bioprinting of skin equivalents is to recreate the distinct basal and suprabasal layers and promote their direct interactions. Such a structural arrangement is essential to establish 3D stratified epidermis disease models, such as for the autoimmune skin disease pemphigus vulgaris (PV), which targets the cell–cell junctions at the interface of the basal and suprabasal layers. Inspired by epithelial regeneration in wound healing, a method that combines 3D bioprinting and spatially guided self‐reorganization of keratinocytes is developed to recapture the fine structural hierarchy that lies in the deep layers of the epidermis. Herein, keratinocyte‐laden fibrin hydrogels are bioprinted to create geographical cues, guiding dynamic self‐reorganization of cells through collective migration, keratinocyte differentiation, and vertical expansion. This process results in a region of self‐organized multilayers (SOMs) that contain the basal‐to‐suprabasal transition, marked by the expressed levels of different types of keratins that indicate differentiation. Finally, the reconstructed skin tissue as an in vitro platform to study the pathogenic effects of PV is demonstrated, illuminating a significant difference in cell–cell junction dissociation induced by PV antibodies in different epidermis layers, which indicates their applications in the preclinical test of possible therapies.more » « less
-
We present an innovative in vitro model aimed at investigating the combined effects of tissue rigidity and shear stress on endothelial cell (EC) function, which are crucial for understanding vascular health and the onset of diseases such as atherosclerosis. Traditionally, studies have explored the impacts of shear stress and substrate stiffness on ECs, independently. However, this integrated system combines these factors to provide a more precise simulation of the mechanical environment of the vasculature. The objective is to examine EC mechanotransduction across various tissue stiffness levels and flow conditions using human ECs. We detail the protocol for synthesizing gelatin methacrylate (GelMA) hydrogels with tunable stiffness and seeding them with ECs to achieve confluency. Additionally, we describe the design and assembly of a cost-effective flow chamber, supplemented by computational fluid dynamics simulations, to generate physiological flow conditions characterized by laminar flow and appropriate shear stress levels. The protocol also incorporates fluorescence labeling for confocal microscopy, enabling the assessment of EC responses to both tissue compliance and flow conditions. By subjecting cultured ECs to multiple integrated mechanical stimuli, this model enables comprehensive investigations into how factors such as hypertension and aging may affect EC function and EC-mediated vascular diseases. The insights gained from these investigations will be instrumental in elucidating the mechanisms underlying vascular diseases and in developing effective treatment strategies.more » « less
-
Abstract 3D bioprinting is an emerging additive manufacturing technique to fabricate constructs for human disease modeling. However, current cell‐laden bioinks lack sufficient biocompatibility, printability, and structural stability needed to translate this technology to preclinical and clinical trials. Here, a new class of nanoengineered hydrogel‐based cell‐laden bioinks is introduced, that can be printed into 3D, anatomically accurate, multicellular blood vessels to recapitulate both the physical and chemical microenvironments of native human vasculature. A remarkably unique characteristic of this bioink is that regardless of cell density, it demonstrates a high printability and ability to protect encapsulated cells against high shear forces in the bioprinting process. 3D bioprinted cells maintain a healthy phenotype and remain viable for nearly one‐month post‐fabrication. Leveraging these properties, the nanoengineered bioink is printed into 3D cylindrical blood vessels, consisting of living co‐culture of endothelial cells and vascular smooth muscle cells, providing the opportunity to model vascular function and pathophysiology. Upon cytokine stimulation and blood perfusion, this 3D bioprinted vessel is able to recapitulate thromboinflammatory responses observed only in advanced in vitro preclinical models or in vivo. Therefore, this 3D bioprinted vessel provides a potential tool to understand vascular disease pathophysiology and assess therapeutics, toxins, or other chemicals.more » « less
-
Endothelium health is essential to the regulation of physiological vascular functions. Because of the critical capability of endothelial cells (ECs) to sense and transduce chemical and mechanical signals in the local vascular environment, their dysfunction is associated with a vast variety of vascular diseases and injuries, especially atherosclerosis and subsequent cardiovascular diseases. This review describes the mechanotransduction events that are mediated through ECs, the EC subcellular components involved, and the pathways reported to be potentially involved. Up-to-date research efforts involving in vivo animal models and in vitro biomimetic models are also discussed, including their advantages and drawbacks, with recommendations on future modeling approaches to aid the development of novel therapies targeting atherosclerosis and related cardiovascular diseases.more » « less
