skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Chalcogenide Perovskite Thin Films with Controlled Phases for Optoelectronics
Abstract Chalcogenide perovskites have emerged as promising semiconductor materials due to their appealing properties, including tunable bandgaps, high absorption coefficients, reasonable carrier lifetimes and mobilities, excellent chemical stability, and environmentally benign nature. However, beyond the well‐studied BaZrS3, reports on chalcogenide perovskite thin films with diverse compositions are scarce. In this study, the realization of four different types of chalcogenide perovskite thin films with controlled phases, through CS2annealing of amorphous chalcogenide precursor films deposited by pulsed laser deposition (PLD), is reported. This achievement is guided by a thorough theoretical investigation of the phase stability of chalcogenide perovskites. Upon crystallization in the distorted perovskite phase, all materials exhibit photoluminescence (PL) with peak positions in the visible range, consistent with their expected bandgap values. However, the full‐width‐at‐half‐maximum (FWHM) of the PL spectra varies significantly across these materials, ranging from 99 meV for SrHfS3to 231 meV for BaHfS3. The difference is attributed to the difference in kinetic barriers between local structural motifs for the Sr and Ba compounds. The findings underscore the promise of chalcogenide perovskite thin films as an alternative to traditional halide perovskites for optoelectronic applications, while highlighting the challenges in optimizing their synthesis and performance.  more » « less
Award ID(s):
2042085 2042126
PAR ID:
10506400
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Advanced Functional Materials
Volume:
34
Issue:
7
ISSN:
1616-301X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Materials Research)
    Abstract Chalcogenide perovskites, particularly BaZrS3, hold promise for optoelectronic devices owing to their exceptional light absorption and inherent stability. However, thin films obtained at lower processing temperatures typically result in small grain sizes and inferior transport properties. Here we introduce an approach employing co-sputtering elemental Ba and Zr targets followed by CS2sulfurization, with a judiciously applied NaF capping layer. NaF acts as a flux agent during sulfurization, leading to marked increase in grain size and improved crystallinity. This process results in near-stoichiometric films with enhanced photoresponse. Terahertz spectroscopy further reveals a carrier mobility more than two orders of magnitude higher than those obtained from field-effect transistor measurements, suggesting that bulk transport is limited by grain boundary scattering. Our results demonstrate flux-assisted sulfurization as an effective strategy to improve the crystallinity of chalcogenide perovskite thin films for optoelectronic applications. Graphical abstract 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Advanced Functional Materials)
    Abstract The synthesis of BaZr(S,Se)3chalcogenide perovskite alloys is demonstrated by selenization of BaZrS3thin films. The anion‐exchange process produces films with tunable composition and band gap without changing the orthorhombic perovskite crystal structure or the film microstructure. The direct band gap is tunable between 1.5 and 1.9 eV. The alloy films made in this way feature one‐hundred‐times stronger photoconductive response and a lower density of extended defects, compared to alloy films made by direct growth. The perovskite structure is stable in high‐selenium‐content thin films with and without epitaxy. The manufacturing‐compatible process of selenization in H2Se gas may spur the development of chalcogenide perovskite solar cell technology. 
    more » « less
  3. ; ; ; (, Advanced Optical Materials)
    Abstract Perovskites have emerged as a forerunner of electronics research due to their vast potential for optoelectronic applications. The numerous combinations of constituent ions and the potential for doping of perovskites lead to a high demand to track the underlying electronic properties. Solution‐based electrochemistry is particularly promising for detailed and facile assessment of perovskites. Here, electrochemical impedance spectroscopy (EIS) of methylammonium lead iodide (MAPbI3) thin films is performed and model them with an equivalent circuit that accounts for solvent, ionic, and thin film effects. A dielectric constant consistent with prior AC studies and a diffusion constant harmonious with cation motion in MAPbI3are extracted. An electrical double layer thickness in the perovskite film of 54 nm is obtained, consistent with lithium doping in perovskite films. Comparing the EIS and equivalent circuit model of perovskite films to control ITO‐only data enabled the assignment of the ions at each interface. This comparison implied a double layer of primarily lithium ions inside the perovskite film at the solution interface with significant recombination of ions on the solution side of the interface. This demonstrates EIS as a powerful tool for studying the fundamental charge accumulation and transport processes in perovskite thin films. 
    more » « less
  4. ; ; ; ; (, Materials Advances)
    Organic-inorganic halide perovskites are promising semiconductors for energy-conversion applications, but these materials face an inherent limitation due to poor intrinsic stability, particularly via decomposition upon exposure to water. The dimensionality and stability of perovskite materials are highly dependent on the organic cation in the perovskite. The incorporation of bulky organic ligands in the structure induces 2D layered perovskites where organic ligands are perpendicular to the inorganic layers and can enhance the perovskite moisture stability through the ligand hydrophobicity. Herein, the relative water stability of reportedly water-stable organic-inorganic halide perovskites were compared between microparticulate powders and compact thin films. In particular, the 3D perovskite DMASnBr3 (DMA = dimethylammonium) and 2D perovskite (PEA)2SnBr4 (PEA = phenylethylammonium) were synthesized in both forms and characterized for water stability. The microparticulate crystals of both materials exhibited significant stability in water while analogous thin films were highly unstable, which was attributed to the presence of a soluble intermixed phase. A new bulky organic ligand, 8-(2,5-bis(thiophen-2-yl)-1H-pyrrol-1-yl)-octylammonium (2TPO), with hydrophobic wing-like groups to help impede water ingress was synthesized and incorporated into a 2D perovskite structure. A thin film of (2TPO)2PbI4 exhibited strongly enhanced durability when fully immersed in water for several minutes or exposed to 85% relative humidity for several days. Material stability was characterized using techniques such as X-ray diffraction (XRD), UV-visible spectroscopy, and X-ray photoelectron spectroscopy (XPS). 
    more » « less
  5. ; ; (, Nanotechnology)
    Abstract This study presents an eco-friendly mechanochemical synthesis of cesium lead bromide (CsPbBr3), eliminating the need of organic solvents and high temperatures. The synthesized CsPbBr3powder is used to fabricate poly(methyl methacrylate) (PMMA)-CsPbBr3films and CsPbBr3nanocrystals (NCs). The photoluminescence (PL) peaks of the emission light are centered at 541 nm, 538 nm, and 514 nm for the CsPbBr3powder, PMMA-CsPbBr3films, and CsPbBr3NCs, respectively, correlating with crystal sizes of 0.96, 0.56, and 0.12μm, respectively. The PL lifetime analysis reveals decay times ( τ 1 , τ 2 ) of (4.18, 20.08), (5.7, 46.99), and (5.81, 23.14) in the units (ns, ns) for the CsPbBr3powder, PMMA-CsPbBr3films, and CsPbBr3NCs, respectively. The PL quantum yield of the CsPbBr3NCs in toluene is 61.3%. Thermal activation energies for thermal quenching are 217.48 meV (films) and 178.15 meV (powder), indicating improved thermal stability with the PMMA encapsulation. The analysis of the PL intensity decay from water diffusion in the PMMA-CsPbBr3films yields 1.70 × 10−12m2s−1for the diffusion coefficient of water, comparable to that for water diffusion in pure PMMA. This work demonstrates a scalable, sustainable strategy for CsPbBr3synthesis and stability enhancement for optoelectronic applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email