An official website of the United States government
To understand community impacts and needs after the August 2023 Maui wildfires, we conducted a rapid survey-based field investigation two weeks after the incident. During the fires, municipal water customers were warned not to use their water due to potential drinking water contamination. Household displacement and isolation of some impacted areas limited extensive study participation. Households (14) in the affected areas were visited and surveyed about property characteristics, evacuation, water use, and water quality observations. Publicly available test results from Maui County and the University of Hawai'i were also reviewed. Opportunistically, wildfire impacts to agricultural water systems were documented. Half of the households had property damage, and all lost power and used drinking water before being notified that it was potentially contaminated. Nearly all households expressed confusion about allowable water use activities and health risks. Most households noticed water issues after the evacuation order was lifted, and some acquired and used at-home drinking water test kits. None of these kits could find all previously identified fire-related chemicals. Damage to agricultural water systems was similar to damage seen for residential systems. Recommendations to lessen impacts and expedite community response and recovery from wildfires are provided.
more »
« less
Lessons Learned: Benzene Distillation Vapor Explosion and Fire
We present here a narrative of an incident that occurred in a chemistry laboratory while purifying benzene using a distillation apparatus. The incident resulted in an injury to a graduate student and a fire that caused approximately $3.5 million in damage including repair/refurbishment costs. Unfortunately, due to the extent of the fire, a direct cause of the incident could not be determined. The lessons learned from this incident that could have potentially prevented the incident altogether, or at least reduced damage, include performing a risk assessment of both the experiment and the situation at the time, maintaining proper housekeeping of the lab, maintaining an updated and accurate chemical inventory, checking in on long duration experiments, always calling for back-up, ensuring the lab and buildings are up to code, wearing proper personal protective equipment, and always calling 911 in an emergency.
more »
« less
- Award ID(s):
- 2154255
- PAR ID:
- 10506401
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- ACS Chemical Health & Safety
- Volume:
- 30
- Issue:
- 4
- ISSN:
- 1871-5532
- Page Range / eLocation ID:
- 146 to 150
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Fire scene reconstruction and determining the fire evolution (i.e., item-to-item ignition events) using the postfire compartment is an extremely difficult task because of the time-integrated nature of the observed damages. Bayesian methods are ideal for making inferences amongst hypotheses given observations and are able to naturally incorporate uncertainties. A Bayesian methodology for determining probabilities to items that may have initiated the fire in a compartment from damage signatures is developed. Exercise of this methodology requires uncertainty quantification of these damage signatures. A simple compartment configuration was used to quantify the uncertainty in damage predictions by firedynamicssimulator (fds) and, a compartment evolution program, jt-risk as compared to experimentally derived damage signatures. Surrogate sensors spaced within the compartment use heat flux data collected over the course of the simulations to inform damage models. Experimental repeatability showed up to 4% uncertainty in damage signatures between replicates. Uncertainties for fds and jt-risk ranged from 12% up to 32% when compared to experimental damages. Separately, the evolution physics of a simple three-fuel-package problem with surrogate damage sensors were characterized in a compartment using experimental data, fds, and jt-risk predictions. A simple ignition model was used for each of the fuel packages. The Bayesian methodology was exercised using the damage signatures collected, cycling through each of the three fuel packages, and combined with the previously quantified uncertainties. Only reconstruction using experimental data was able to confidently predict the true hypothesis from the three scenarios.more » « less
-
Abstract Although corticosterone (Cort) has been the predominant metric used to assess acute stress in birds, it does not always accurately reflect how an animal copes with a stressor. Downstream measurements may be more reliable. In the current study, we tested the hypothesis that acute increases in DNA damage could be used to assess stressor exposure. Studies have shown DNA damage increases in response to stress‐related hormones in vitro; however, this has not yet been thoroughly applied in wild animals. We exposed house sparrows (Passer domesticus) to a 30‐ or 120‐min restraint stressor and took blood samples at 0, 30, 60, and 120 min to measure Cort, DNA damage, and uric acid. Both treatments increased DNA damage and Cort, and decreased uric acid. It thus appears that DNA damage can reflect acute stressor exposure. To improve the usability of DNA damage as a metric for stress, we also tested the impacts of sample storage on DNA damage. Leaving red blood cells on ice for up to 24 hr, only slightly influenced DNA damage. Freezing blood samples for 1–4 weeks substantially increased DNA damage. These findings emphasize the importance of reducing variation between samples by assaying them together whenever possible. Overall, these results indicate that assessing DNA damage is a valid method of assessing acute stressor exposure that is suitable for both laboratory‐ and field‐based studies; however, additional research is needed on the molecular dynamics of nucleated red blood cells, including whether and how their DNA is repaired.more » « less
-
Background Situational awareness is an essential component of wildland firefighter safety. In the US, crew lookouts provide situational awareness by proxy from ground-level locations with visibility of both fire and crew members. Aims To use machine learning to predict potential lookout locations based on incident data, mapped visibility, topography, vegetation, and roads. Methods Lidar-derived topographic and fuel structural variables were used to generate maps of visibility across 30 study areas that possessed lookout location data. Visibility at multiple viewing distances, distance to roads, topographic position index, canopy height, and canopy cover served as predictors in presence-only maximum entropy modelling to predict lookout suitability based on 66 known lookout locations from recent fires. Key results and conclusions The model yielded a receiver-operating characteristic area under the curve of 0.929 with 67% of lookouts correctly identified by the model using a 0.5 probability threshold. Spatially explicit model prediction resulted in a map of the probability a location would be suitable for a lookout; when combined with a map of dominant view direction these tools could provide meaningful support to fire crews. Implications This approach could be applied to produce maps summarising potential lookout suitability and dominant view direction across wildland environments for use in pre-fire planning.more » « less
-
null (Ed.)Abstract Seismic waves carrying tiny perturbing stresses can trigger earthquakes in geothermal and volcanic regions. The underlying cause of this dynamic triggering is still not well understood. One leading hypothesis is that a sudden increase in the fluid-pore pressure in the fault zone is involved, but the exact physical mechanism is unclear. Here, we report experimental evidence in which a fluid-filled fracture was shown to be able to amplify the pressure of an incoming seismic wave. We built miniature pressure sensors and directly placed them inside a thin fluid-filled fracture to measure the fluid pressure during wave propagation. By varying the fracture aperture from 0.2 to 9.2 mm and sweeping the frequency from 12 to 70 Hz, we observed in the lab that the fluid pressure in the fracture could be amplified up to 25.2 times compared with the incident-wave amplitude. Because an increase of the fluid pressure in a fault can reduce the effective normal stress to allow the fault to slide, our observed transient pressure surge phenomenon may provide the mechanism for earthquake dynamic triggering.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acs.chas.3c00033
