An official website of the United States government
Understanding the dynamics of shear band propagation in metallic glasses remains elusive due to the limited temporal and spatial scales accessible in experiments. In micron-scale molecular dynamics simulations on two model metallic glasses, we studied the propagation of a dominant shear band under uniaxial tension with a macroscopic strain of 3-5%. For both materials, the shear band can be intersonic with a propagation speed exceeding their respective shear wave speeds. The propagation exhibits intrinsic instability that manifests itself as microbranching and considerable fluctuations in velocity. The shear strain singularity ahead of propagating shear band tip scales as 1/r (r is the distance away from the tip), independent of the macroscopic tensile strain. In addition, we studied the intersection of two shear bands under uniaxial tension, during which path deflection, speed slowing-down, and temperature rise at the junction region were observed. The dynamics of propagating shear band shown here indicate that shear band in metallic glasses can be viewed as shear crack under the framework of weakly nonlinear fracture mechanics theory.
more »
« less
A Cavity-Based Micromechanical Model for the Shear-Band Failure in Metallic Glasses Under Arbitrary Stress States
Abstract Deformation and fracture of metallic glasses are often modeled by stress-based criteria which often incorporate some sorts of pressure dependence. However, detailed mechanisms that are responsible for the shear-band formation and the entire damage initiation and evolution process are complex and the origin of such a pressure dependence is obscure. Here, we argue that the shear-band formation results from the constitutive instability, so that the shear-band angle and arrangements can be easily related to the macroscopic constitutive parameters such as internal friction and dilatancy factor. This is one reason for the observed tension-compression asymmetry in metallic glasses. The free volume coalescence leads to precipitous formation of voids or cavities inside the shear bands, and the intrinsic “ductility” is therefore governed by the growth of these cavities. Based on a generalized Stokes–Hookean analogy, we can derive the critical shear-band failure strain with respect to the applied stress triaxiality, in which the cavity evolution scenarios are sharply different between tension-controlled and shear/compression-dominated conditions. This is another possible reason for the tension-compression asymmetry. It is noted that diffusive-controlled cavity growth could also be the rate-determining process, as suggested by the recent measurements of shear-band diffusivity and viscosity that turn out to satisfy the Stokes–Einstein relationship. This constitutes the third possible reason for the tension-compression asymmetry.
more »
« less
- Award ID(s):
- 2052729
- PAR ID:
- 10510078
- Publisher / Repository:
- American Society of Mechanical Engineers
- Date Published:
- Journal Name:
- Journal of Applied Mechanics
- Volume:
- 90
- Issue:
- 12
- ISSN:
- 0021-8936
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Recently, Arumugam et al. (2023) developed a constitutive relation for the response of isotropic inhomogeneous compressible elastic solids in order to describe the response of the trabecular bone. Since porous solids such as bones, cement concrete, rocks, metallic alloys, etc., are anisotropic, in this short note we develop a constitutive relation for such bodies that exhibit transverse isotropy and also having two preferred directions of symmetry. Another characteristic of bones is that they exhibit different response characteristics in tension and compression, and hence any constitutive relation that is developed has to be capable of describing this. Also, the material moduli depend on both the density and the mean value of the stress (mechanical pressure), as is to be expected in a porous solid. In the constitutive relation that is developed in this paper, though the stress and the linearized strain appear linearly in the constitutive relation, the relationship is nonlinear. We also derive the response of such solids when undergoing uniaxial extension and compression, simple shear and torsion.more » « less
-
null (Ed.)The mechanical response and microstructure evolution in a rolled AZ31B magnesium alloy were experimentally characterized using companion thin-walled tubular specimens under free-end monotonic torsion. The tubular specimens were made with their axes along the normal direction of the rolled magnesium plate. The shear stress-shear strain response shows a subtle sigmodal shape that is composed of four distinctive stages of strain hardening. Basal slips and tension twinning are operated throughout the shear deformation. Both tension twinning and compressing twinning are favored. Growth and interaction of tension twins with multiple variants lead to formation of twin-twin boundaries (TTBs). The collective hardening effects by twin boundary (TB) and TTB result in a unique rise of the strain hardening rate in Stage II and III. In addition to primary twins, tension-compression double twins and tension-compression-tension tertiary twins with detectable sizes are observed in the tension-twin favorable grains whereas compression-tension double twins are detected in the tension-twin unfavorable grains; all of which become more observable with the increasing shear strain. During Stage IV deformation where TTB formation exhausts, non-basal prismatic slips become more significant and are responsible for the progressive decrease in strain hardening rate in this stage. Swift effect, which is commonly observed in textured materials, is evidenced under free-end torsion. The origin of Swift effect is confirmed to be dislocation slips at a shear strain less than 5% but is predominantly due to tension twinning at a larger plastic strain.more » « less
-
In this work a transformation strain gradient enhancement is introduced into a phenomenological constitutive model for the pseudoelastic behavior of shape memory alloys. The constitutive model is able to capture several unique features of the constitutive response of these materials during the transformation between austenite and martensite during the pseudoelastic response. These features include the asymmetry in the initial transformation stresses in tension versus compression, the asymmetry in the transformation strains in tension and compression, and finally the asymmetry in the hardening behavior in tension and compression. In fact, experiments have shown that untrained NiTi exhibits hardening during its transformation in compression, but softening for tensile loading. It is this softening behavior that motivates the need for the introduction of the transformation strain gradient into the constitutive modeling. Transformation strain gradient effects are introduced via a phase variable that describes the extent of transformation. The free energy of the material then depends on gradients of the phase variable, which introduces a material length scale into the theory. The governing equation for the phase variable is developed from a microforce balance and continuum thermodynamics analysis. The model is implemented in the commercial finite element software Abaqus through user defined subroutines and several numerical simulations are performed to illustrate the model response and lack of numerical mesh-dependency of the results.more » « less
-
Modelling seasonal landslide motion: Does it only depend on fluctuations in normal effective stress?Abstract Landslide motion is often simulated with interface‐like laws able to capture changes in frictional strength caused by the growth of the pore water pressure and the consequent reduction of the effective stress normal to the plane of sliding. Here it is argued that, although often neglected, the evolution of all the 3D stress components within the basal shear zone of landslides also contributes to changes in frictional strength and must be accounted for to predict changes in seasonal velocity. For this purpose, an augmented sliding‐consolidation model is proposed which allows for the computation of excess pore pressure development and downslope sliding with any constitutive law with 3D stress evolution. Simulations of idealised infinite slope models subjected to hydrologic forcing are used to study the role of in‐situ stress conditions and stress rate multiaxiality. Specifically, a Drucker‐Prager perfectly plastic model is used to replicate frictional failure and shear deformation at the base of landslides. The model reveals that conditions amenable to the shearing of a frictional interface are met only after numerous rainfall cycles, that is, when multiaxial stress rates are suppressed. In this case, the landslide is predicted to move through a seasonal ratcheting controlled only by the effective stress component normal to the plane of sliding. By contrast, in newly formed landslides, the multiaxial stress evolution is found to produce further regimes of motion, from plastic shakedown to cyclic failure, neither of which can be captured by interface‐like frictional laws. Notably, the model suggests that a transition across these regimes can emerge in response to an aggravation of the magnitude of forcing, implying that (i) fluctuations in climate may alter the seasonal trends of motion observed today; (ii) our ability to quantify landslide‐induced risks is impaired unless proper geomechanical models are used to examine their long‐term dynamics.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4062724
