A stable lean‐electrolyte operating lithium–sulfur (Li–S) battery based on a cathode of Li2S in situ electrocatalytically deposited from L2S8catholyte onto a support of metallic molybdenum disulfide (1T‐MoS2) on carbon cloth (CC) is created. The 1T‐MoS2significantly accelerates the conversion Li2S8catholyte to Li2S, chemically adsorbs lithium polysulfide (LiPSs) from solution, and suppresses crossover of the LiPSs to the anode. These experimental findings are explained by density functional theory calculations that show that 1T‐MoS2gives rise to strong adsorption of polysulfides on its surface and is electrocatalytic for the targeted reversible Li–S conversion reactions. The CC/1T‐MoS2electrode in a Li–S battery delivers an initial capacity of 1238 mAh g−1, with a low capacity fade of only 0.051% per cycle over 500 cycles at 0.5
Mg batteries are a promising alternative to Li-based chemistries due to the high abundance, low cost, and high volumetric capacity of Mg relative to Li. Mg is also less prone to dendritic plating morphologies, promising safer operation. Mg plating and stripping is highly efficient in chloride-containing electrolytes; however, chloride is incompatible with many candidate cathode materials. In this work, we capitalize on the positive effect of chloride by using transition metal chloride cathodes with a focus on low cost, Earth-abundant metals. Both soluble and sparingly soluble chlorides show capacity fade upon cycling. Active material dissolution and subsequent crossover to the Mg anode are the primary drivers of capacity fade in highly soluble metal chloride cathodes. We hypothesize that incomplete conversion and chemical reduction by the Grignard-based electrolyte are major promoters of capacity fade in sparingly soluble metal chlorides. Modifications to the electrolyte can improve capacity retention, suggesting that future work in this system may yield low cost, high retention Mg-MClxbatteries.
- NSF-PAR ID:
- 10512224
- Publisher / Repository:
- The Electrochemical Society
- Date Published:
- Journal Name:
- Journal of The Electrochemical Society
- Volume:
- 171
- Issue:
- 6
- ISSN:
- 0013-4651
- Format(s):
- Medium: X Size: Article No. 060501
- Size(s):
- Article No. 060501
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract C . Even at a high sulfur loading (4.4 mg cm−2) and low electrolyte/S (E/S) ratio of 3.7 µL mg−1, the battery achieves an initial reversible capacity of 1176 mA h g−1at 0.5C , with 87% capacity retention after 160 cycles. The post 500 cycles Li metal opposing 1T‐MoS2is substantially smoother than the Li opposing CC, with XPS supporting the role of 1T‐MoS2in inhibiting LiPSs crossover. -
more » « less
Abstract Suppressing Li dendrite growth has gained research interest due to the high theoretical capacity of Li metal anodes. Traditional Celgard membranes which are currently used in Li metal batteries fall short in achieving uniform Li flux at the electrode/electrolyte interface due to their inherent irregular pore sizes. Here, the use of an ultrathin (≈1.2 nm) carbon nanomembrane (CNM) which contains sub‐nanometer sized pores as an interlayer to regulate the mass transport of Li‐ions is demonstrated. Symmetrical cell analysis reveals that the cell with CNM interlayer cycles over 2x longer than the control experiment without the formation of Li dendrites. Further investigation on the Li plating morphology on Cu foil reveals highly dense deposits of Li metal using a standard carbonate electrolyte. A smoothed‐particle hydrodynamics simulation of the mass transport at the anode–electrolyte interface elucidates the effect of the CNM in promoting the formation of highly dense Li deposits and inhibiting the formation of dendrites. A lithium metal battery fabricated using the LiFePO4cathode exhibits a stable, flat voltage profile with low polarization for over 300 cycles indicating the effect of regulated mass transport.
-
more » « less
Abstract Solid state batteries hold the promise of enhanced safety and higher energy density over conventional lithium‐ion batteries with flammable organic electrolytes. However, advancement of solid electrolyte materials has yet to translate into practical batteries due to the need to process the powders into thin sheets with high pressure compaction and high temperature sintering. Here, a new strategy is developed for synthesizing sulfide‐based solid electrolyte using low‐temperature solution processing, which is a simple and potentially cost‐effective way to make a thin solid electrolyte layer. By controlling the stoichiometric ratio of Li2S and S, soluble polysulfides are produced in diethylene glycol dimethyl ether, which are reacted with P2S5to form a conductive Li3PS4solid electrolyte. It is demonstrated that a dense solid electrolyte layer can be directly formed on Li metal with a high quality electrolyte/electrode interface, producing a solid electrolyte with promising electrochemical performance. Also, first‐principles calculations are conducted to elucidate the formation mechanisms behind the soluble intermediates and the solid electrolyte layers.
-
more » « less
Abstract A dual‐layer interphase that consists of an in‐situ‐formed lithium carboxylate organic layer and a thin BF3‐doped monolayer Ti3C2MXene on Li metal is reported. The honeycomb‐structured organic layer increases the wetting of electrolyte, leading to a thin solid electrolyte interface (SEI). While the BF3‐doped monolayer MXene provides abundant active sites for lithium homogeneous nucleation and growth, resulting in about 50% reduced thickness of inorganic‐rich components among the SEI layer. A low overpotential of less than 30 mV over 1000 h cycling in symmetric cells is received. The functional BF3 groups, along with the excellent electronic conductivity and smooth surface of the MXene, greatly reduce the lithium plating/stripping energy barrier, enabling a dendrite‐free lithium‐metal anode. The battery with this dual‐layer coated lithium metal as the anode displays greatly improved electrochemical performance. A high capacity‐retention of 175.4 mAh g−1at 1.0 C is achieved after 350 cycles. In a pouch cell with a capacity of 475 mAh, the battery still exhibits a high discharge capacity of 165.6 mAh g−1with a capacity retention of 90.2% after 200 cycles. In contrast to the fast capacity decay of pure Li metal, the battery using NCA as the cathode also displays excellent capacity retention in both coin and pouch cells. The dual‐layer modified surface provides an effective approach in stabilizing the Li‐metal anode.
-
more » « less
Abstract Metallic lithium is the most competitive anode material for next‐generation lithium (Li)‐ion batteries. However, one of its major issues is Li dendrite growth and detachment, which not only causes safety issues, but also continuously consumes electrolyte and Li, leading to low coulombic efficiency (CE) and short cycle life for Li metal batteries. Herein, the Li dendrite growth of metallic lithium anode is suppressed by forming a lithium fluoride (LiF)‐enriched solid electrolyte interphase (SEI) through the lithiation of surface‐fluorinated mesocarbon microbeads (MCMB‐F) anodes. The robust LiF‐enriched SEI with high interfacial energy to Li metal effectively promotes planar growth of Li metal on the Li surface and meanwhile prevents its vertical penetration into the LiF‐enriched SEI from forming Li dendrites. At a discharge capacity of 1.2 mAh cm−2, a high CE of >99.2% for Li plating/stripping in FEC‐based electrolyte is achieved within 25 cycles. Coupling the pre‐lithiated MCMB‐F (Li@MCMB‐F) anode with a commercial LiFePO4cathode at the positive/negative (P/N) capacity ratio of 1:1, the LiFePO4//Li@MCMB‐F cells can be charged/discharged at a high areal capacity of 2.4 mAh cm−2for 110 times at a negligible capacity decay of 0.01% per cycle.
