3D printing of thermoplastics through local melting and deposition via Material Extrusion Additive Manufacturing provides a simple route to the near net-shape manufacture of complex objects. However, the mechanical properties resulting from these 3D printed structures tend to be inferior when compared to traditionally manufactured thermoplastics. These unfavorable characteristics are generally attributed to the structure of the interface between printed roads. Here, we illustrate how the molecular mass distribution for a model thermoplastic, poly(methyl methacrylate) (PMMA), can be tuned to enhance the Young’s modulus of 3D printed plastics. Engineering the molecular mass distribution alters the entanglement density, which controls the strength of the PMMA in the solid state and the chain diffusion in the melt. Increasing the low molecular mass tail increases Young’s modulus and ultimate tensile strength of the printed parts. These changes in mechanical properties are comparable to more complex routes previously reported involving new chemistry or nanoparticles. Controlling the molecular mass distribution provides a simple route to improve the performance in 3D printing of thermoplastics that can be as effective as more complex approaches.
more »
« less
Molecular mass engineering for filaments in material extrusion additive manufacture
3D printing of thermoplastics through local melting and deposition via material extrusion additive manufacturing provides a simple route to the near net‐shape manufacture of complex objects. However, the mechanical properties resulting from these 3D printed structures tend to be inferior when compared to traditionally manufactured thermoplastics. These unfavorable characteristics are generally attributed to the structure of the interface between printed roads. Here, we illustrate how the molecular mass distribution for a model thermoplastic, poly(methyl methacrylate) (PMMA), can be tuned to enhance the Young's modulus of 3D printed plastics. Engineering the molecular mass distribution alters the entanglement density, which controls the strength of the PMMA in the solid state and the chain diffusion in the melt. Increasing the low molecular mass tail increases Young's modulus and ultimate tensile strength of the printed parts. These changes in mechanical properties are comparable to more complex routes previously reported involving new chemistry or nanoparticles to enhance the mechanical performance of 3D printed thermoplastics. Controlling the molecular mass distribution provides a simple route to improve the performance in 3D printing of thermoplastics that can be as effective as more complex approaches.
more » « less- NSF-PAR ID:
- 10514880
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Polymer Science
- Volume:
- 62
- Issue:
- 12
- ISSN:
- 2642-4150
- Format(s):
- Medium: X Size: p. 2616-2629
- Size(s):
- p. 2616-2629
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract Additive manufacturing (AM) has emerged as a promising approach to achieve energetic materials (EMs) with intricate geometries and controlled microstructures, which are crucial for safety and performance optimization. However, current AM methods still face limitations such as limited densities and inadequate solids loading. To overcome these limitations, we have developed a pressure‐assisted binder jet (PBJ) process that has the potential to allow for the fabrication of intricate EMs while preserving their desired properties. This study aims to investigate the effects of printing parameters on the microstructures and properties of EMs, including density, solids loading, mechanical properties, and heterogeneity. Our results demonstrate that the PBJ process achieves exceptional properties in EMs, including densities up to 83.4 % and solids loading up to 95.4 %, surpassing those achieved by existing AM processes. Furthermore, the mechanical properties of the fabricated EMs are comparable to those achieved using conventional fabrication techniques, including a compressive strength of 3.32 MPa, a Young's modulus of 16.68 MPa, a Poisson's ratio of 0.45, a shear modulus of 5.73 MPa, and a bulk modulus of 21.01 GPa. Various test cases were printed to showcase the ability of the PBJ process to create EMs with complex structures and exceptional properties. Micro‐computed tomography was employed to analyze the influence of printing parameters on the internal composition and microstructures of the printed specimens.
-
more » « less
Abstract Integration of conductive electrodes with 3D tissue models can have great potential for applications in bioelectronics, drug screening, and implantable devices. As conventional electrodes cannot be easily integrated on 3D, polymeric, and biocompatible substrates, alternatives are highly desirable. Graphene offers significant advantages over conventional electrodes due to its mechanical flexibility and robustness, biocompatibility, and electrical properties. However, the transfer of chemical vapor deposition graphene onto millimeter scale 3D structures is challenging using conventional wet graphene transfer methods with a rigid poly (methyl methacrylate) (PMMA) supportive layer. Here, a biocompatible 3D graphene transfer method onto 3D printed structure using a soft poly ethylene glycol diacrylate (PEGDA) supportive layer to integrate the graphene layer with a 3D engineered ring of skeletal muscle tissue is reported. The use of softer PEGDA supportive layer, with a 105times lower Young's modulus compared to PMMA, results in conformal integration of the graphene with 3D printed pillars and allows electrical stimulation and actuation of the muscle ring with various applied voltages and frequencies. The graphene integration method can be applied to many 3D tissue models and be used as a platform for electrical interfaces to 3D biological tissue system.
-
more » « less
Abstract This series of publications describes research rendering soft polyisobutylene (PIB)‐based thermoplastic elastomers 3D printable by blending with rigid chemically compatible thermoplastics. The molecular structure, morphology, physical properties, and 3D printability of such blends have been systematically investigated. The authors' first report was concerned with the rendering of soft poly(styrene‐
b ‐isobutylene‐b ‐styrene) (SIBS) 3D printable by blending with rigid polystyrene (PS). Here they report the macromolecular engineering of SIBS/polyphenylene oxide (PPO) blends for 3D printing. PPO, a rigid high‐performance thermoplastic, is compatible with the hard PS block in SIBS; however, neither PPO nor SIBS can be directly 3D printed. The microphase‐separated structures and physical properties of SIBS/PPO blends are systematically tuned by controlling blending ratios and molecular weights. Suitable composition ranges and desirable properties of SIBS/PPO blends for 3D printing are optimized. The morphology and properties of SIBS/PPO blends are characterized by an ensemble of techniques, including atomic force microscopy, small‐angle X‐ray scattering, and thermal and mechanical properties testing. The elucidation of processing‐structure‐property relationship of SIBS/PPO blends is essential for 3D printing and advanced manufacturing of high‐performance polymer systems. -
more » « less
Abstract Dynamic bond exchanging vitrimers have emerged recently due to their malleability, self‐heal ability, recyclability, and mechanical stability. Likewise, 3D printing is consciously introduced at different platforms for ease of fabrication, high throughput, cost‐effectiveness, and waste reduction. These two distinctive techniques have recently made their consensus performance, resulting from a phenomenal change in the printing field. Conventionally, thermoplastic inks have been primarily used in 3D printing, owing to their effortless processability. At the same time, thermosets were utilized for their superior mechanical strength. However, these two essential properties have been required to be presented in the printed material. In that scenario, thermoset vitrimer materials have been introduced in 3D printing, where malleability and mechanical stability have been observed in the same material. Thus, this article details the recent vitrimer material included with the different 3D printing system systems with their reported results to understand and make them widespread. Eventually, the outlook and perspectives could be helpful to understand and enhance this specific field.
