Title: Selective electrochemical degradation of bottlebrush elastomers
<sc>A</sc>bstract We introduce a simple synthetic strategy to selectively degrade bottlebrush networks derived from well‐defined poly(4‐methylcaprolactone) (P4MCL) bottlebrush polymers. Functionalization of the hydroxyl groups present at the terminal ends of P4MCL side chains withα‐lipoic acid resulted in bottlebrush polymers having a range of molecular weights (Mn = 45–2200 kg mol−1) and a tunable number of reactive dithiolane chain ends. These functionalized chain ends act as efficient crosslinkers due to radical ring‐opening of the dithiolane rings under UV light. The resulting redox‐active disulfide crosslinks enable mild electrochemical or chemical degradation of the SS crosslinks to regenerate the starting bottlebrush polymer. P4MCL side chains and the disulfides can be degraded simultaneously using harsher reducing conditions. This combination of bottlebrush architecture with facile disulfide crosslinking presents a versatile platform for preparing highly tunable elastomers that undergo controlled degradation under mild conditions.  more » « less
Award ID(s):
1933487
PAR ID:
10526503
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Journal of Polymer Science
ISSN:
2642-4150
Subject(s) / Keyword(s):
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Bottlebrush polymers have a variety of useful properties including a high entanglement molecular weight, low Young's modulus, and rapid kinetics for self‐assembly. However, the translation of bottlebrushes to real‐world applications is limited by complex, multi‐step synthetic pathways and polymerization reactions that rely on air‐sensitive catalysts. Additionally, most bottlebrushes are non‐degradable. Herein, we report an inexpensive, versatile, and simple approach to synthesize degradable bottlebrush polymers under mild reaction conditions. Our approach relies on the “grafting‐through” polymerization of α‐lipoic acid (LA)‐functionalized macromonomers. These macromonomers can be polymerized under mild, catalyst‐free conditions, and due to reversibility of the disulfide bond in LA, the resulting bottlebrush polymers can be depolymerized by cleaving disulfide backbone bonds. Bottlebrushes with various side‐chain chemistries can be prepared through the atom transfer radical polymerization (ATRP) of LA‐functionalized macromonomers, and the backbone length is governed by the macromonomer molecular weight and solvent polarity. We also demonstrate that LA‐functionalized macromonomers can be copolymerized with acrylates to form degradable bottlebrush networks. This work demonstrates the preparation of degradable bottlebrush polymers with a variety of side‐chain chemistries and provides insight into the light‐mediated grafting‐through polymerization of dithiolane‐functionalized macromonomers. 
    more » « less
  2. ABSTRACT The introduction of degradable units into the backbone of commodity vinyl polymers represents a major opportunity to address the societal challenge of plastic waste and polymer recycling. Previously, we reported the facile copolymerization ofα‐lipoic acid derivatives containing 1,2‐dithiolane rings with vinyl monomers leading to the incorporation of degradable S–S disulfide bonds along the backbone at relatively high dithiolane monomer feed ratios. To further enhance the recyclability of these systems, here we describe a facile and user‐friendly strategy for backbone degradation at significantly lower dithiolane loading levels through cleavage of both SS and SC backbone units. Copolymers ofn‐butyl acrylate (nBA) or styrene (St) with small amounts of eitherα‐lipoic acid (LA) or ethyl lipoate (ELp) dissolved in DMF were observed to undergo efficient degradation when heated at 100°C under air. For example, at only 5 mol% ELp, a high molecular weight poly(ELp‐co‐nBA) (Mn = 62 kg mol−1) degraded to low molecular weight oligomers (Mn = 3.2 kg mol−1) by simple heating in DMF. In contrast, extended heating of either poly(nBA) or poly(St) homopolymers under the same conditions did not lead to any change in molecular weight or cleavage of the C–C backbone. This novel approach allows for the effective degradation of vinyl‐based polymers with negligible impact on properties and performance due to the low levels of dithiolane incorporation. 
    more » « less
  3. Bottlebrush polymers are complex macromolecules with tunable physical properties dependent on the chemistry and architecture of both the side chains and the backbone. Prior work has demonstrated that bottlebrush polymer additives can be used to control the interfacial properties of blends with linear polymers but has not specifically addressed the effects of bottlebrush side chain microstructures. Here, using a combination of experiments and self-consistent field theory (SCFT) simulations, we investigated the effects of side chain microstructures by comparing the segregation of bottlebrush additives having random copolymer side chains with bottlebrush additives having a mixture of two different homopolymer side chain chemistries. Specifically, we synthesized bottlebrush polymers with either poly(styrene- ran -methyl methacrylate) side chains or with a mixture of polystyrene (PS) and poly(methyl methacrylate) (PMMA) side chains. The bottlebrush additives were matched in terms of PS and PMMA compositions, and they were blended with linear PS or PMMA chains that ranged in length from shorter to longer than the bottlebrush side chains. Experiments revealed similar behaviors of the two types of bottlebrushes, with a slight preference for mixed side-chain bottlebrushes at the film surface. SCFT simulations were qualitatively consistent with experimental observations, predicting only slight differences in the segregation of bottlebrush additives driven by side chain microstructures. Specifically, these slight differences were driven by the chemistries of the bottlebrush polymer joints and side chain end-groups, which were entropically repelled and attracted to interfaces, respectively. Using SCFT, we also demonstrated that the interfacial behaviors were dominated by entropic effects with high molecular weight linear polymers, leading to enrichment of bottlebrush near interfaces. Surprisingly, the SCFT simulations showed that the chemistry of the joints connecting the bottlebrush backbones and side chains played a more significant role compared with the side chain end groups in affecting differences in surface excess of bottlebrushes with random and mixed side chains. This work provides new insights into the effects of side chain microstructure on segregation of bottlebrush polymer additives. 
    more » « less
  4. Abstract This present study illustrates the synthesis and preparation of polyoxanorbornene‐based bottlebrush polymers with poly(ethylene oxide) (PEO) side chains by ring‐opening metathesis polymerization for solid polymer electrolytes (SPE). In addition to the conductive PEO side chains, the polyoxanorbornene backbones may act as another ion conductor to further promote Li‐ion movement within the SPE matrix. These results suggest that these bottlebrush polymer electrolytes provide impressively high ionic conductivity of 7.12 × 10−4S cm−1at room temperature and excellent electrochemical performance, including high‐rate capabilities and cycling stability when paired with a Li metal anode and a LiFePO4cathode. The new design paradigm, which has dual ionic conductive pathways, provides an unexplored avenue for inventing new SPEs and emphasizes the importance of molecular engineering to develop highly stable and conductive polymer electrolytes for lithium‐metal batteries (LMB). 
    more » « less
  5. ABSTRACT Bottlebrush (BB) polymers with polydimethylsiloxane (PDMS) side‐chains exhibit supersoft moduli (E < 100 kPa) without solvent, making them promising tissue‐mimetic materials for biomedical applications. While larger backbones and side‐chains enhance softness, synthetic limitations have constrained their molecular weight. We report a graft‐through method to access ultra‐high molecular weight PDMS BB polymers (~1–20 million g mol−1). Central to this was the design of a norbornene‐pyrrolidine aryllithium initiator for the anionic ring‐opening of hexamethylcyclotrisiloxane (D3), yielding monofunctionalized PDMS macromonomers (MMs) with molecular weights from 1–30 kg mol−1. Subsequent ring‐opening metathesis polymerization (ROMP) produced BB homopolymers within minutes (t ≤ 5 min) and with low dispersity (Đ < 1.3). The ‐C‐Si‐O‐ linkage between the backbone and side‐chains provided improved chemical stability over earlier ‐C‐O‐Si‐ analogues. These MMs were also used to create a linear‐bottlebrush‐linear block copolymer, forming a supersoft (E = 79 kPa), thermoplastic elastomer with excellent elastic recovery (~96%). This platform enables the synthesis of ultra‐high molecular weight graft (co‐)polymers, advancing the study of extreme structure–property relationships and supporting the development of novel soft materials for bio‐interfacing. 
    more » « less