A thin layer of Al 2 O 3 at the back of CdSe x T e1-x /CdTe devices is shown to passivate the back interface and drastically improve surface recombination lifetimes and photoluminescent response. Despite this, such devices do not show an improvement in open-circuit voltage (V OC. ) Adding a p + amorphous silicon layer behind the Al 2 O 3 bends the conduction band upward, reducing the barrier to hole extraction and improving collection. Further optimization of the Al 2 O 3 , amorphous silicon (a-Si), and indium-doped tin oxide (ITO) layers, as well as their interaction with the CdCl 2 passivation process, are necessary to translate these electro-optical improvements into gains in voltage.
more »
« less
This content will become publicly available on March 1, 2025
Photovoltaic effect on silicon–alumina–ferromagnet tunnel junction providing insights about spin-dependent molecular spintronics solar cells
The study focuses on the observation of the photovoltaic (PV) effect on Si/AlOx/FM semiconductor–insulator–ferromagnetic metal (SIFM) structure. Utilization of ∼10 nm NiFe film as the top ferromagnet (FM) layer was permeable for sufficient light radiation necessary for reaching the silicon substrate for the generation of electron–hole pairs upon photoexcitation. The effect of light intensity and magnetic field was studied on the SIFM’s PV response. We also investigated the role of silicon doping and the AlOx tunnel barrier between Si and FM in exploring suitable band bending necessary for separating the electron–hole pairs. Increasing the dopant density in Si and a damaged AlOx tunnel barrier quenched the PV effect. Ferromagnet/Insulator/Ferromagnet (FMIFM) was also studied to gain deeper mechanistic insights into the spin-dependent photovoltaic effect observed on FM/AlOx/FM tunnel junction-based molecular spintronics devices. Bridging of magnetic molecules between the Si and FM electrodes of SIFM increased the overall device current by establishing additional parallel conduction channels along with the AlOx tunnel barrier. However, SIFM with molecular conduction channels did not produce a PV effect. This study reported the PV effect on well-designed SIFM and opened possibilities for exploring new systems. More importantly, this paper provided insights into the role of molecule-induced exchange coupling in transforming an ordinary, cheap, and widely available ferromagnet into a semiconductor-like material capable of showing PV.
more » « less- Award ID(s):
- 1914751
- NSF-PAR ID:
- 10529242
- Publisher / Repository:
- AIP
- Date Published:
- Journal Name:
- AIP Advances
- Volume:
- 14
- Issue:
- 3
- ISSN:
- 2158-3226
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract Nearly 70 years old dream of incorporating molecule as the device element is still challenged by competing defects in almost every experimentally tested molecular device approach. This paper focuses on the magnetic tunnel junction (MTJ) based molecular spintronics device (MTJMSD) method. An MTJMSD utilizes a tunnel barrier to ensure a robust and mass-producible physical gap between two ferromagnetic electrodes. MTJMSD approach may benefit from MTJ's industrial practices; however, the MTJMSD approach still needs to overcome additional challenges arising from the inclusion of magnetic molecules in conjunction with competing defects. Molecular device channels are covalently bonded between two ferromagnets across the insulating barrier. An insulating barrier may possess a variety of potential defects arising during the fabrication or operational phase. This paper describes an experimental and theoretical study of molecular coupling between ferromagnets in the presence of the competing coupling via an insulating tunnel barrier. We discuss the experimental observations of hillocks and pinhole-type defects producing inter-layer coupling that compete with molecular device elements. We performed theoretical simulations to encompass a wide range of competition between molecules and defects. Monte Carlo Simulation (MCS) was used for investigating the defect-induced inter-layer coupling on MTJMSD. Our research may help understand and design molecular spintronics devices utilizing various insulating spacers such as aluminum oxide (AlOx) and magnesium oxide (MgO) on a wide range of metal electrodes. This paper intends to provide practical insights for researchers intending to investigate the molecular device properties via the MTJMSD approach and do not have a background in magnetic tunnel junction fabrication.
-
Molecular spintronics devices (MSDs) attempt to harness molecules’ quantum state, size, and configurable attributes for application in computer devices—a quest that began more than 70 years ago. In the vast number of theoretical studies and limited experimental attempts, MSDs have been found to be suitable for application in memory devices and futuristic quantum computers. MSDs have recently also exhibited intriguing spin photovoltaic-like phenomena, signaling their potential application in cost-effective and novel solar cell technologies. The molecular spintronics field’s major challenge is the lack of mass-fabrication methods producing robust magnetic molecule connections with magnetic electrodes of different anisotropies. Another main challenge is the limitations of conventional theoretical methods for understanding experimental results and designing new devices. Magnetic tunnel junction-based molecular spintronics devices (MTJMSDs) are designed by covalently connecting paramagnetic molecules across an insulating tunneling barrier. The insulating tunneling barrier serves as a mechanical spacer between two ferromagnetic (FM) electrodes of tailorable magnetic anisotropies to allow molecules to undergo many intriguing phenomena. Our experimental studies showed that the paramagnetic molecules could produce strong antiferromagnetic coupling between two FM electrodes, leading to a dramatic large-scale impact on the magnetic electrode itself. Recently, we showed that the Monte Carlo Simulation (MCS) was effective in providing plausible insights into the observation of unusual magnetic domains based on the role of single easy-axis magnetic anisotropy. Here, we experimentally show that the response of a paramagnetic molecule is dramatically different when connected to FM electrodes of different easy-axis anisotropies. Motivated by our experimental studies, here, we report on an MCS study investigating the impact of the simultaneous presence of two easy-axis anisotropies on MTJMSD equilibrium properties. In-plane easy-axis anisotropy produced multiple magnetic phases of opposite spins. The multiple magnetic phases vanished at higher thermal energy, but the MTJMSD still maintained a higher magnetic moment because of anisotropy. The out-of-plane easy-axis anisotropy caused a dominant magnetic phase in the FM electrode rather than multiple magnetic phases. The simultaneous application of equal-magnitude in-plane and out-of-plane easy-axis anisotropies on the same electrode negated the anisotropy effect. Our experimental and MCS study provides insights for designing and understanding new spintronics-based devices.more » « less
-
Abstract This work reports the fabrication and characterization of multifunctional, nanostructured passivation layers formed using a self-assembly process that provide both surface passivation and improved light trapping in crystalline silicon photovoltaic (PV) cells. Scalable block copolymer self-assembly and vapor phase infiltration processes are used to form arrays of aluminum oxide nanostructures (Al 2 O 3 ) on crystalline silicon without substrate etching. The Al 2 O 3 nanostructures are characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and spectroscopic ellipsometry. Injection-level dependent photoconductance measurements are used to determine the effective carrier lifetime of the samples to confirm the nanostructures successfully passivate the Si surface. Finite element method simulations and reflectance measurement show that the nanostructures increase the internal rear reflectance of the PV cell by suppressing the parasitic optical losses in the metal contact. An optimized morphology of the structures is identified for their potential use in PV cells as multifunctional materials providing surface passivation, photon management, and carrier transport pathways.more » « less
-
Lazou, A. ; Daehn, K. ; Fleuriault, C. ; Gökelma, M. ; Olivetti, E. ; Meskers, C (Ed.)State-of-the-art solar-grade silicon production is energy intensive and has a negative impact on the environment. Due to the robust and rapid growth of the Si-based photovoltaic (PV) industry, it is necessary to develop a greener technology for silicon production. Solid oxide membrane (SOM) electrolysis is a proven versatile green technology that can be developed to economically produce many important metal or metal compounds from their oxides. This work will discuss application of SOM electrolysis to produce solar-grade silicon from silica in a single-step resulting in net-zero-carbon emission. The high-temperature SOM electrolysis cell employs stable molten oxide-fluoride bath with silicon wafer cathode and stabilized zirconia membrane-based novel anodes. The cell design and process parameters are selected to enable silicon deposition on the Si wafer cathode. However, initially an electrochemical oxidation reaction occurred between silicon and oxygen that involved the cathode/flux/gas interfaces. An approach to successfully prevent this side reaction has been demonstrated. Electrochemical characterization of the SOM process is presented, and post-experimental characterization demonstrates Si deposits in the form of silicon carbide due to the use of graphite crucible and graphite current collector.more » « less
