Piezoresponse force microscopy (PFM) is used for investigation of the electromechanical behavior of the head‐to‐head (H‐H) and tail‐to‐tail (T‐T) domain walls on the non‐polar surfaces of three uniaxial ferroelectric materials with different crystal structures: LiNbO3, Pb5Ge3O11, and ErMnO3. It is shown that, contrary to the common expectation that the domain walls should not exhibit any PFM response on the non‐polar surface, an out‐of‐plane deformation of the crystal at the H‐H and T‐T domain walls occurs even in the absence of the out‐of‐plane polarization component due to a specific form of the piezoelectric tensor. In spite of their different symmetry, in all studied materials, the dominant contribution comes from the counteracting shear strains on both sides of the H‐H and T‐T domain walls. The finite element analysis approach that takes into account a contribution of all elements in the piezoelectric tensor, is applicable to any ferroelectric material and can be instrumental for getting a new insight into the coupling between the electromechanical and electronic properties of the charged ferroelectric domain walls.
Ferroelectric domain walls are a rich source of emergent electronic properties and unusual polar order. Recent studies show that the configuration of ferroelectric walls can go well beyond the conventional Ising‐type structure. Néel‐, Bloch‐, and vortex‐like polar patterns have been observed, displaying strong similarities with the spin textures at magnetic domain walls. Here, the discovery of antiferroelectric domain walls in the uniaxial ferroelectric Pb5Ge3O11is reported. Highly mobile domain walls with an alternating displacement of Pb atoms are resolved, resulting in a cyclic 180° flip of dipole direction within the wall. Density functional theory calculations show that Pb5Ge3O11is hyperferroelectric, allowing the system to overcome the depolarization fields that usually suppress the antiparallel ordering of dipoles along the longitudinal direction. Interestingly, the antiferroelectric walls observed under the electron beam are energetically more costly than basic head‐to‐head or tail‐to‐tail walls. The results suggest a new type of excited domain‐wall state, expanding previous studies on ferroelectric domain walls into the realm of antiferroic phenomena.
more » « less- PAR ID:
- 10532174
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Application of scanning probe microscopy techniques such as piezoresponse force microscopy (PFM) opens the possibility to re‐visit the ferroelectrics previously studied by the macroscopic electrical testing methods and establish a link between their local nanoscale characteristics and integral response. The nanoscale PFM studies and phase field modeling of the static and dynamic behavior of the domain structure in the well‐known ferroelectric material lead germanate, Pb5Ge3O11, are reported. Several unusual phenomena are revealed: 1) domain formation during the paraelectric‐to‐ferroelectric phase transition, which exhibits an atypical cooling rate dependence; 2) unexpected electrically induced formation of the oblate domains due to the preferential domain walls motion in the directions perpendicular to the polar axis, contrary to the typical domain growth behavior observed so far; 3) absence of the bound charges at the 180° head‐to‐head (H–H) and tail‐totail (T–T) domain walls, which typically exhibit a significant charge density in other ferroelectrics due to the polarization discontinuity. This strikingly different behavior is rationalized by the phase field modeling of the dynamics of uncharged H–H and T–T domain walls. The results provide a new insight into the emergent physics of the ferroelectric domain boundaries, revealing unusual properties not exhibited by conventional Ising‐type walls.
-
more » « less
Abstract Ferroelectric domain walls provide a fertile environment for novel materials physics. If a polarization discontinuity arises, it can drive a redistribution of electronic carriers and changes in band structure, which often result in emergent 2D conductivity. If such a discontinuity is not tolerated, then its amelioration usually involves the formation of complex topological patterns, such as flux‐closure domains, dipolar vortices, skyrmions, merons, or Hopfions. The degrees of freedom required for the development of such patterns, in which dipolar rotation is a hallmark, are readily found in multiaxial ferroelectrics. In uniaxial ferroelectrics, where only two opposite polar orientations are possible, it has been assumed that discontinuities are unavoidable when antiparallel components of polarization meet. This perception has been borne out by the appearance of charged conducting domain walls in systems such as hexagonal manganites and lithium niobate. Here, experimental and theoretical investigations on lead germanate (Pb5Ge3O11) reveal that polar discontinuities can be obviated at head‐to‐head and tail‐to‐tail domain walls by mutual domain bifurcation along two different axes, creating a characteristic saddle‐point domain wall morphology and associated novel dipolar topology, removing the need for screening charge accumulation and associated conductivity enhancement.
-
more » « less
Abstract Domain wall nanoelectronics is a rapidly evolving field, which explores the diverse electronic properties of the ferroelectric domain walls for application in low‐dimensional electronic systems. One of the most prominent features of the ferroelectric domain walls is their electrical conductivity. Here, using a combination of scanning probe and scanning transmission electron microscopy, the mechanism of the tunable conducting behavior of the domain walls in the sub‐micrometer thick films of the technologically important ferroelectric LiNbO3is explored. It is found that the electric bias generates stable domains with strongly inclined domain boundaries with the inclination angle reaching 20° with respect to the polar axis. The head‐to‐head domain boundaries exhibit high conductance, which can be modulated by application of the sub‐coercive voltage. Electron microscopy visualization of the electrically written domains and piezoresponse force microscopy imaging of the very same domains reveals that the gradual and reversible transition between the conducting and insulating states of the domain walls results from the electrically induced wall bending near the sample surface. The observed modulation of the wall conductance is corroborated by the phase‐field modeling. The results open a possibility for exploiting the conducting domain walls as the electrically controllable functional elements in the multilevel logic nanoelectronics devices.
-
more » « less
Abstract Domain walls separating regions of ferroelectric material with polarization oriented in different directions are crucial for applications of ferroelectrics. Rational design of ferroelectric materials requires the development of a theory describing how compositional and environmental changes affect domain walls. To model domain wall systems, a discrete microscopic Landau–Ginzburg–Devonshire (dmLGD) approach with A‐ and B‐site cation displacements serving as order parameters is developed. Application of dmLGD to the classic BaTiO3, KNbO3,and PbTiO3ferroelectrics shows that A–B cation repulsion is the key interaction that couples the polarization in neighboring unit cells of the material. dmLGD decomposition of the total energy of the system into the contributions of the individual cations and their interactions enables the prediction of different properties for a wide range of ferroelectric perovskites based on the results obtained for BaTiO3, KNbO3,and PbTiO3only. It is found that the information necessary to estimate the structure and energy of domain‐wall “defects” can be extracted from single‐domain 5‐atom first‐principles calculations, and that “defect‐like” domain walls offer a simple model system that sheds light on the relative stabilities of the ferroelectric, antiferroelectric, and paraelectric bulk phases. The dmLGD approach provides a general theoretical framework for understanding and designing ferroelectric perovskite oxides.
