Attention:The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, November 12th until 12:00 AM ET on Friday, November 13th due to maintenance. We apologize for the inconvenience.


Title: Dielectric Properties of a Ferroelectric Nematic Material: Quantitative Test of the Polarization-Capacitance Goldstone Mode
The recently discovered ferroelectric nematic (NF) liquid crystals (LC) have been reported to show an extraordinarily large value of the real part of the dielectric constant (ɛ' >103) at low frequencies. However, it was argued by Clark et al in Physical Review Research 6, 013195 (2024) that what was measured was the capacitance of the insulating layer at LC/electrode surface and not that of the liquid crystal. Here we describe the results of dielectric spectroscopy measurements of an NF material in cells with variable thickness of the insulating layers. Our measurements quantitatively verify the model by Clark et al. Additionally, our measurements in cells with bare conducting indium tin oxide surface provide a crude estimate of ε_⊥~10^2 in the NF phase.  more » « less
Award ID(s):
2122399 2215191
PAR ID:
10538593
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
American Physical Society
Date Published:
Journal Name:
Physical Review Letters
Volume:
133
Issue:
3
ISSN:
0031-9007
Subject(s) / Keyword(s):
Sponsoring Org:
National Science Foundation
More Like this
  1. Ganesh, Krishna N (Ed.)
    The discovery of the ferroelectric nematic (NF) phase has attracted significant attention from the soft matter community, both for exploring the scientific basis of its origin and for advancing its potential applications in devices such as optical modulators and high-energy-density storage supercapacitors. Unlike rigid solid-state ferroelectrics, the fluidic nature of NF materials offers additional flexibility in device fabrication. In the NF phase, these materials exhibit remarkably large saturated spontaneous polarization (≳6 μC/cm2), which is comparable to that of the solid-state ferroelectrics, and consequently, these materials will exhibit exceptionally strong nonlinear electro-optic effects. In this paper, we report the synthesis of three new NF phase compounds with an extended temperature range of up to 103 °C. Two of these compounds show a direct Iso-to-NF phase transition, and in two cases, a monotropic NF phase was observed below 30 °C. The design and synthesis of the materials are described. The compounds are characterized by analysis of textures using polarizing optical microscopy. X-ray measurements show that the effective length of the molecule is smaller in the NF phase than in the N/Iso phase seemingly arising from a better orientational ordering of the polar molecules. Dielectric measurements confirm the presence of a ferroelectric mode of large dielectric strength in the NF phase. Temperature-dependent birefringence data show a large increase in the order parameter at the Iso−NF or N−NF transition temperature. The fundamental properties determined for these materials will support their future applications. 
    more » « less
  2. Di Bartolomeo, Antonio (Ed.)
    Abstract Recently, doping guest materials such as quantum dots (QDs) into liquid crystals (LCs) has been of great interest since their addition substantially enhances the properties of LC and opens new avenues for scientific advancement. Here, we report the induction of homeotropic alignment in cells without alignment layers of the negative dielectric nematic liquid crystal, N-(4-Methoxybenzylidene)-4-butylaniline (MBBA) by doping with carbon dots (CDs ∼2.8 ± 0.72 nm). The CDs-MBBA composites (CDs concentration: 0.002, 0.01, 0.03, 0.1 and 0.3 wt%) were investigated using optical polarising microscopy, electro-optical and dielectric techniques. Polarizing optical micrographs and voltage dependent optical transmission revealed the induced homeotropic alignment for all the composites under investigation. Interestingly, the least concentrated sample, 0.002 wt% exhibited partial homeotropic alignment. However, due to light leakage, the optical transmission value below threshold voltage was relatively higher than the rest of the composites. MBBA is a negative dielectric material, hence the application of a voltage across the cell was able to switch the alignment from a dark to a bright state for all composites. However, above a certain voltage (>threshold voltage), the bright state produced some instabilities. The value of dielectric permittivity was observed to decrease with increasing concentration, confirming the effect of CDs in producing homeotropic alignment in MBBA. Measurements as a function of temperature were conducted to examine the thermal stability of the induced alignment. The alignment was found to be stable throughout the nematic phase of MBBA. The induction of such alignment without conventional alignment (i.e., rubbing of polyimides) technique can be helpful in addressing the evolving display demands by making liquid crystal displays (LCDs) and other display devices cost effective. 
    more » « less
  3. null (Ed.)
    Mammalian cells are soft, and correct functioning requires that cells undergo dynamic shape changes in vivo. Although a range of diseases are associated with stiffening of red blood cells (RBCs; e.g., sickle cell anemia or malaria), the mechanical properties and thus shape responses of cells to complex viscoelastic environments are poorly understood. We use vapor pressure measurements to identify aqueous liquid crystals (LCs) that are in osmotic equilibrium with RBCs and explore mechanical coupling between RBCs and LCs. When transferred from an isotropic aqueous phase into a LC, RBCs exhibit complex yet reversible shape transformations, from initially biconcave disks to elongated and folded geometries with noncircular cross-sections. Importantly, whereas the shapes of RBCs are similar in isotropic fluids, when strained by LC, a large variance in shape response is measured, thus unmasking cell-to-cell variation in mechanical properties. Numerical modeling of LC and cell mechanics reveals that RBC shape responses occur at constant cell membrane area but with membrane shear moduli that vary between cells from 2 to 16 × 10 −6 N/m. Temperature-dependent LC elasticity permits continuous tuning of RBC strains, and chemical cross-linking of RBCs, a model for diseased cells, leads to striking changes in shape responses of the RBCs. Overall, these results provide insight into the coupling of strain between soft mammalian cells and synthetic LCs, and hint at new methods for rapidly characterizing mechanical properties of single mammalian cells in a population and thus cell-to-cell variance. 
    more » « less
  4. Langmuir turbulence consists of Langmuir circulation (LC) generated at the surface of rivers, lakes, bays, and oceans by the interaction between the wind-driven shear and surface gravity waves. In homogeneous shallow water, LC can extend to the bottom of the water column and interact with the bottom boundary layer. Large-eddy simulation (LES) of LC in shallow water was performed with the finite volume method and various forms of subgrid-scale (SGS) model characterized by different near-wall treatments of the SGS eddy viscosity. The wave forcing relative to wind forcing in the LES was set following the field measurements of full-depth LC during the presence of LC engulfing a water column 15 m in depth in the coastal ocean, reported in the literature. It is found that the SGS model can greatly impact the structure of LC in the lower half of the water column. Results are evaluated in terms of (1) the Langmuir turbulence velocity statistics and (2) the lateral (crosswind) length scale and overall cell structure of LC. LES with an eddy viscosity with velocity scale in terms of S and Ω (where S is the norm of the strain rate tensor and Ω is the norm of the vorticity tensor) and a Van Driest wall damping function (referred to as the S-Omega model) is found to provide best agreement with pseudo-spectral LES in terms of the lateral length scale and overall cell structure of LC. Two other SGS models, namely the dynamic Smagorinsky model and the wall-adapting local-eddy viscosity model are found to provide less agreement with pseudo- spectral LES, for example, as they lead to less coherent bottom convergence of the cells and weaker associ ated upward transport of slow downwind moving fluid. Finally, LES with the S-Omega SGS model is also found to lead to good agreement with physical measurements of LC in the coastal ocean in terms of Langmuir turbulence decay during periods of surface heating 
    more » « less
  5. Abstract Poly(ε-caprolactone) (PCL) is one of the leading biocompatible and biodegradable polymers. However, the mechanical property of PCL is relatively poor as compared with that of polyolefins, which has limited the active applications of PCL as an industrial material. In this study, to enhance the mechanical property of PCL, cellulose nanofibers (C-NF) with high mechanical property, were employed as reinforcement materials for PCL. The C-NF were fabricated via the electrospinning of cellulose acetate (CA) followed by the subsequent saponification of the CA nanofibers. For the enhancement of the mechanical property of the PCL composite, the compatibility of C-NF and PCL was investigated: the surface modification of the C-NF was introduced by the ring-opening polymerization of the ε-caprolactone on the C-NF surface (C-NF-g-PCL). The polymerization was confirmed by the Fourier transform infrared (FTIR) spectroscopy. Tensile testing was performed to examine the mechanical properties of the C-NF/PCL and the C-NF-g-PCL/PCL. At the fiber concentration of 10 wt%, the Young’s modulus of PCL compounded with neat C-NF increased by 85% as compared with that of pure PCL, while, compounded with C-NF-g-PCL, the increase was 114%. The fracture surface of the composites was analyzed by scanning electron microscopy (SEM). From the SEM images, it was confirmed that the interfacial compatibility between PCL and C-NF was improved by the surface modification. The results demonstrated that the effective surface modification of C-NF contributed to the enhancement of the mechanical property of PCL. 
    more » « less