An official website of the United States government
Materials with low thermal conductivity are essential to providing thermal insulation to many technological systems, such as electronics, thermoelectrics and aerospace devices. Here, we report ultra-low thermal conductivity of two oxide materials. Sr 2 FeCoO 6−δ has a perovskite-type structure with oxygen vacancies. It shows a thermal conductivity of 0.5 W m −1 K −1 , which is lower than those reported for perovskite oxides. The incorporation of calcium to form Ca 2 FeCoO 6−δ , leads to a structural change and the formation of different coordination geometries around the transition metals. This structural transformation results in a remarkable enhancement of the thermal insulation properties, showing the ultra-low thermal conductivity of 0.05 W m −1 K −1 , which is one of the lowest values found among solid materials to date. A comparison to previously reported perovskite oxides, which show significantly inferior thermal insulation compared to our materials, points to the effect of oxygen-vacancies and their ordering on thermal conductivity.
more »
« less
Comparative Thermal Insulation Nature of Ca 2 FeMnO 6−δ and Sr 2 FeMnO 6−δ
In this study, we investigate the utility of Ca2FeMnO6-δand Sr2FeMnO6-δas materials with low thermal conductivity, finding potential applications in thermoelectrics, electronics, solar devices, and gas turbines for land and aerospace use. These compounds, characterized as oxygen-deficient perovskites, feature distinct vacancy arrangements. Ca2FeMnO6-δadopts a brownmillerite-type orthorhombic structure with ordered vacancy arrangement, while Sr2FeMnO6-δadopts a perovskite cubic structure with disordered vacancy distribution. Notably, both compounds exhibit remarkably low thermal conductivity, measuring below 0.50 Wm−1K−1. This places them among the materials with the lowest thermal conductivity reported for perovskites. The observed low thermal conductivity is attributed to oxygen vacancies and phonon scattering. Interestingly as SEM images show the smaller grain size, our findings suggest that creating vacancies and lowering the grain size or increasing the grain boundaries play a crucial role in achieving such low thermal conductivity values. This characteristic enhances the potential of these materials for applications where efficient heat dissipation, safety, and equipment longevity are paramount.
more »
« less
- PAR ID:
- 10539329
- Publisher / Repository:
- Electrohemial Society
- Date Published:
- Journal Name:
- ECS Advances
- Edition / Version:
- 1
- Volume:
- 3
- Issue:
- 1
- ISSN:
- 2754-2734
- Page Range / eLocation ID:
- 014001
- Subject(s) / Keyword(s):
- Thermal insulation, Ca2FeMnO6−δ, Sr2FeMnO6−δ
- Format(s):
- Medium: X Size: 1MB Other: 1
- Size(s):
- 1MB
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Electron doping in perovskites is an effective approach to design and tailor the structure and property of materials. In A 2 BB′O 6−δ -type double perovskites, B-site cation order can be tunable by A-site modification, potentially leading to significant effect on the oxygen nonstoichiometry of the compounds. La 3+ -doped Sr 2 FeMoO 6−δ (Sr 2−x La x FeMoO 6−δ , SLFM with 0 ≤ x ≤ 1) double perovskites have been designed and characterized systematically in this study as anode materials for solid oxide fuel cells. Rietveld refinement of powder X-ray diffraction reveals a crystalline symmetry transition of SLFM from tetragonal to orthorhombic with the increase of La content, driven by the extra electron onto the antibonding orbitals of e g and t 2g of Fe/Mo cations. An increase in Fe/Mo anti-site defect accompanies this phase transition. Solid oxide fuel cells incorporating the Sr 1.8 La 0.2 FeMoO 6−δ (SLFM2) anode demonstrate impressive power outputs and stable performance under direct CH 4 operation because of its altered electronic structure, desired oxygen vacancy concentration and enhanced reducibility. Density functional theory plus U correction calculations provide an insight into how La doping affects the Fe/Mo anti-site defects and consequently the oxygen transport dynamics.more » « less
-
unknown (Ed.)Materials with low thermal conductivity have been used in thermoelectrics, electronics, solar devices, and land base and aerospace gas turbines to prevent heat dissipation and provide safety and longevity of equipment. We report Ca2Fe2O6-δ, and Sr2Fe2O6-δ for their low thermal conductivities. These compounds are vacancy-ordered oxygen-deficient perovskites but with different vacancy arrangements. Ca2Fe2O6-δ has a brownmillerite type structure while Sr2Fe2O6-δ has a different structure.more » « less
-
Abstract Solid-state control of the thermal conductivity of materials is of exceptional interest for novel devices such as thermal diodes and switches. Here, we demonstrate the ability tocontinuouslytune the thermal conductivity of nanoscale films of La0.5Sr0.5CoO3-δ(LSCO) by a factor of over 5, via a room-temperature electrolyte-gate-induced non-volatile topotactic phase transformation from perovskite (withδ≈ 0.1) to an oxygen-vacancy-ordered brownmillerite phase (withδ= 0.5), accompanied by a metal-insulator transition. Combining time-domain thermoreflectance and electronic transport measurements, model analyses based on molecular dynamics and Boltzmann transport equation, and structural characterization by X-ray diffraction, we uncover and deconvolve the effects of these transitions on heat carriers, including electrons and lattice vibrations. The wide-range continuous tunability of LSCO thermal conductivity enabled by low-voltage (below 4 V) room-temperature electrolyte gating opens the door to non-volatile dynamic control of thermal transport in perovskite-based functional materials, for thermal regulation and management in device applications.more » « less
-
The electrical properties of the entropy stabilized oxides: Zr6Nb2O17, Zr6Ta2O17, Hf6Nb2O17and Hf6Ta2O17were characterized. The results and the electrical properties of the products (i.e. ZrO2, HfO2, Nb2O5and Ta2O5) led us to hypothesize the A6B2O17family is a series of mixed ionic-electronic conductors. Conductivity measurements in varying oxygen partial pressure were performed on A6Nb2O17and A6Ta2O17.The results indicate that electrons are involved in conduction in A6Nb2O17while holes play a role in conduction of A6Ta2O17. Between 900 °C–950 °C, the charge transport in the A6B2O17system increases in Ar atmosphere. A combination of DTA/DSC and in situ high temperature X-ray diffraction was performed to identify a potential mechanism for this increase. In-situ high temperature X-ray diffraction in Ar does not show any phase transformation. Based on this, it is hypothesized that a change in the oxygen sub-lattice is the cause for the shift in high temperature conduction above 900 °C–950 °C. This could be:(i)Nb(Ta)4+- oxygen vacancy associate formation/dissociation,(ii)formation of oxygen/oxygen vacancy complexes(iii)ordering/disordering of oxygen vacancies and/or(iv)oxygen-based superstructure commensurate or incommensurate transitions. In-situ high temperature neutron diffraction up to 1050 °C is required to help elucidate the origins of this large increase in conductivity.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1149/2754-2734/ad27dc
