skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Per- and Polyfluoroalkyl Substance Exposure Risks in US Carceral Facilities, 2022
Objectives. To assess the US incarcerated population’s risk of exposure to per- and polyfluoroalkyl substances (PFASs). Methods. We assessed how many of the 6118 US carceral facilities were located in the same hydrologic unit code watershed boundaries as known or likely locations of PFAS contamination. We conducted geospatial analyses on data aggregated from Environmental Protection Agency databases and a PFAS site tracker in 2022 to model the hydrologically feasible known and presumptive PFAS contamination sites for nearly 2 million incarcerated people. Results. Findings indicate that 5% (∼310) of US carceral facilities have at least 1 known source of PFAS contamination in the same watershed boundary and that it is at a higher elevation than the facility; also 47% (∼2285) have at least 1 presumptive source. A minimum of 990 000 people are incarcerated in these facilities, including at least 12 800 juveniles. Exposure risks faced by incarcerated youths are disproportionately underassessed. Conclusions. The long-term impacts from potential exposures to PFAS are preventable and exacerbate health inequities among incarcerated populations. Widespread public attention to PFASs can be parlayed into broader environmental monitoring for imprisoned people. ( Am J Public Health. 2024;114(5):501–510. https://doi.org/10.2105/AJPH.2024.307571 )  more » « less
Award ID(s):
2120510
PAR ID:
10542221
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
AJPH
Date Published:
Journal Name:
American Journal of Public Health
Volume:
114
Issue:
5
ISSN:
0090-0036
Page Range / eLocation ID:
501 to 510
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Environmental Science & Technology)
    Despite decades of research on per- and polyfluoroalkyl substances (PFAS), fundamental obstacles remain to addressing worldwide contamination by these chemicals and their associated impacts on environmental quality and health. Here, we propose six urgent questions relevant to science, technology, and policy that must be tackled to address the “PFAS problem”: (1) What are the global production volumes of PFAS, and where are PFAS used? (2) Where are the unknown PFAS hotspots in the environment? (3) How can we make measuring PFAS globally accessible? (4) How can we safely manage PFAS-containing waste? (5) How do we understand and describe the health effects of PFAS exposure? (6) Who pays the costs of PFAS contamination? The importance of each question and barriers to progress are briefly described, and several potential paths forward are proposed. Given the diversity of PFAS and their uses, the extreme persistence of most PFAS, the striking ongoing lack of fundamental information, and the inequity of the health and environmental impacts from PFAS contamination, there is a need for scientific and regulatory communities to work together, with cooperation from PFAS-related industries, to fill in critical data gaps and protect human health and the environment. 
    more » « less
  2. ; ; (, Social Studies of Science)
    Understandings of environmental governance both assume and challenge the relationship between expert knowledge and corresponding action. We explore this interplay by examining the context of knowledge production pertaining to a contested class of chemicals. Per-and polyfluorinated alkyl substances (PFASs) are widely used industrial compounds containing chemical chains of carbon and fluorine that are persistent, bioaccumulative and toxic. Although industry and regulatory scientists have studied the exposure and toxicity concerns of these compounds for decades, and several contaminated communities have documented health concerns as a result of their high levels of exposure, PFAS use remains ubiquitous in a large range of consumer and industrial products. Despite this significant history of industry knowledge production documenting exposure and toxicity concerns, the regulatory approach to PFASs has been limited. This is largely due to a regulatory framework that privileges industry incentives for rapid market entry and trade secret protection over substantive public health protection, creating areas of unseen science, research that is conducted but never shared outside of institutional boundaries. In particular, the risks of PFASs have been both structurally hidden and unexamined by existing regulatory and industry practice. This reveals the uneven pathways that construct issues of social and scientific concern. 
    more » « less
  3. ; ; ; ; ; ; (, Journal of Materials Chemistry A)
    Although most manufacturers stopped using long-chain per- and polyfluoroalkyl substances (PFASs), including perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), short-chain PFASs are still widely employed. Short-chain PFASs are less known in terms of toxicity and have different adsorption behavior from long-chain PFASs. Previous studies have shown electrostatic interaction with the adsorbent to be the dominant mechanism for the removal of short-chain PFASs. In this study, we designed a high charge density cationic quaternized nanocellulose (QNC) to enhance the removal of both short- and long-chain PFASs from contaminated water. Systematic batch adsorption tests were conducted using the QNC adsorbent to compare its efficiency against PFASs with varying chain lengths and functional groups. From the kinetic study, PFBA (perfluorobutanoic acid), PFBS (perfluorobutanesulfonic acid) and PFOS showed rapid adsorption rates, which reached near equilibrium values (>95% of removal) between 1 min to 15 min, while PFOA required a relatively longer equilibration time of 2 h (it obtained 90% of removal within 15 min). According to the isotherm results, the maximum adsorption capacity ( Q m ) of the QNC adsorbent exhibited the following trend: PFOS ( Q m = 559 mg g −1 or 1.12 mmol g −1 ) > PFOA ( Q m = 405 mg g −1 or 0.98 mmol g −1 ) > PFBS ( Q m = 319 mg g −1 or 1.06 mmol g −1 ) > PFBA ( Q m = 121 mg g −1 or 0.57 mmol g −1 ). This adsorption order generally matches the hydrophobicity trend among four PFASs associated with both PFAS chain length and functional group. In competitive studies, pre-adsorbed short-chain PFASs were quickly desorbed by long-chain PFASs, suggesting that the hydrophobicity of the molecule played an important role in the adsorption process on to QNC. Finally, the developed QNC adsorbent was tested to treat PFAS-contaminated groundwater, which showed excellent removal efficiency (>95%) for long-chain PFASs (C7–C9) even at a low adsorbent dose of 32 mg L −1 . However, short-chain PFASs ( i.e. , PFBA and perfluoropentanoic acid (PFPeA)) were poorly removed by the QNC adsorbent (0% and 10% removal, respectively) due to competing constituents in the groundwater matrix. This was further confirmed by controlled experiments that revealed a drop in the performance of QNC to remove short-chain PFASs at elevated ionic strength (NaCl), but not for long-chain PFASs, likely due to charge neutralization of the anionic functional group of PFASs by inorganic cations. Overall, the QNC adsorbent featured improved PFAS adsorption capacity at almost two-fold of PFAS removal by granular activated carbons, especially for short-chain PFASs. We believe, QNC can complement the use of common treatment methods such as activated carbon or ionic exchange resin to remove a wide range of PFAS pollutants, heading towards the complete remediation of PFAS contamination. 
    more » « less
  4. ; ; ; ; ; (, Nature)
    Abstract Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are persistent, bioaccumulative and anthropogenic pollutants that have attracted the attention of the public and private sectors because of their adverse impact on human health1. Although various technologies have been deployed to degrade PFASs with a focus on non-polymeric functionalized compounds (perfluorooctanoic acid and perfluorooctanesulfonic acid)2–4, a general PFAS destruction method coupled with fluorine recovery for upcycling is highly desirable. Here we disclose a protocol that converts multiple classes of PFAS, including the fluoroplastics polytetrafluoroethylene and polyvinylidene fluoride, into high-value fluorochemicals. To achieve this, PFASs were reacted with potassium phosphate salts under solvent-free mechanochemical conditions, a mineralization process enabling fluorine recovery as KF and K2PO3F for fluorination chemistry. The phosphate salts can be recovered for reuse, implying no detrimental impact on the phosphorus cycle. Therefore, PFASs are not only destructible but can now contribute to a sustainable circular fluorine economy. 
    more » « less
  5. ; (, Environmental Research: Health)
    Abstract Untreated sewage discharges leading to environmental contamination are increasingly common in communities across the globe. The cause of these discharges ranges from sewer lines in disrepair, blockages, and in the era of more extreme wet weather events, the infiltration of stormwater into the system during heavy downpours. Regardless of the driver of these events, the aftermath results in raw sewage spilling into local waterways, city streets, and commercial and residential structures. Historical research in public health has thoroughly documented the connection between exposure to untreated sewage and waterborne disease. Recent research has detected antibiotic-resistant bacteria at wastewater treatment facilities at a time when deaths by antibiotic-resistant infections are on the rise. However, no research has explored the exposure pathways of antibiotic-resistant bacteria during sanitary sewer overflows and household-level sewage backups. In this commentary, we aim to introduce this new frontier of environmental health risks and disasters. To do this, we describe the history of modern sanitation and sewer infrastructure with a particular focus on wastewater infrastructure in the U.S. We also explore emerging risks and current methods for identifying antibiotic-resistant bacteria in the environment. We end with future directions for interdisciplinary scholarship at the nexus of urban planning, engineering, and public health by introducing the Water Emergency Team (WET) Project. WET is a community-based multi-method effort to identify environmental risks in the aftermath of household backups through (1) residential surveys, (2) indoor visual inspections, (3) environmental sampling, and (4) laboratory processing and reporting. Our hope is that by introducing this comprehensive approach to environmental risks analysis, other scholars will join us in this effort and ultimately towards addressing this grand challenge of our time. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email