skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Seismic Modeling of Bedload Transport in a Gravel‐Bed Alluvial Channel
Abstract Recent theoretical models and field observations suggest that fluvial bedload flux can be estimated from seismic energy measured within appropriate frequency bands. We present an application of the Tsai et al. (2012,https://doi.org/10.1029/2011gl050255) bedload seismic model to an ephemeral channel located in the semi‐arid southwestern US and incorporate modifications to better estimate bedload flux in this environment. To test the model, we collected streambank seismic signals and directly measured bedload flux during four flash‐floods. Bedload predictions calculated by inversion from the Tsai model underestimated bedload flux observations by one‐to‐two orders of magnitude at low stages. However, model predictions were better for moderate flow depths (>50 cm), where saltation is expected to dominate bedload transport. We explored three differences between the model assumptions and our field conditions: (a) rolling and sliding particles have different impact frequencies than saltating particles; (b) the velocity and angle of impact of rolling particles onto the riverbed differ; and (c) the fine‐grained alluvial character of this and similar riverbeds leads to inelastic impacts, as opposed to the originally conceptualized elastic impacts onto rigid bedrock. We modified the original model to assume inelastic bed impacts and to incorporate rolling and sliding by adjusting the statistical distributions of bedload impact frequency, velocity, and angle. Our modified “multiple‐transport‐mode bedload seismic model” decreased error relative to observations to less than one order of magnitude across all measured flow conditions. Further investigations in other environmental settings are required to demonstrate the robustness and general applicability of the model.  more » « less
Award ID(s):
1852794
PAR ID:
10543762
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Journal of Geophysical Research: Earth Surface
Volume:
129
Issue:
9
ISSN:
2169-9003
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. (, Geophysical Research Letters)
    Abstract This letter compares the predictions of two expressions proposed for the porosity evolution in the context of rate and state friction. One (Segall & Rice, 1995,https://doi.org/10.1029/95jb02403) depends only on the sliding velocity; the other (Sleep, 1995,https://doi.org/10.1029/94jb03340) depends only on the state variable. Simulations of both are similar for velocity stepping and slide‐hold‐slide experiments. They differ significantly for normal effective stress jumps at constant sliding velocity. Segall and Rice (1995,https://doi.org/10.1029/95jb02403) predicts no change in the porosity; Sleep (1995,https://doi.org/10.1029/94jb03340) does. Simulation with a spring‐block model indicates that the magnitude of rapid slip events is essentially the same for the two formulations. Variations of porosity and induced pore pressure near rapid slip events are similar and consistent with experimental observations. Predicted porosity variations during slow slip intervals and the time at which rapid slip events occur are significantly different. The simulation indicates that changes in friction stress due to pore pressure changes exceed those due to rate and state effects. 
    more » « less
  2. ; ; ; (, Earth and Space Science)
    Abstract Wave breaking induced bubbles contribute a significant part of air‐sea gas fluxes. Recent modeling of the sea state dependent CO2flux found that bubbles contribute up to ∼40% of the total CO2air‐sea fluxes (Reichl & Deike, 2020,https://doi.org/10.1029/2020gl087267). In this study, we implement the sea state dependent bubble gas transfer formulation of Deike and Melville (2018,https://doi.org/10.1029/2018gl078758) into a spectral wave model (WAVEWATCH III) incorporating the spectral modeling of the wave breaking distribution from Romero (2019,https://doi.org/10.1029/2019gl083408). We evaluate the accuracy of the sea state dependent gas transfer parameterization against available measurements of CO2gas transfer velocity from 9 data sets (11 research cruises, see Yang et al. (2022,https://doi.org/10.3389/fmars.2022.826421)). The sea state dependent parameterization for CO2gas transfer velocity is consistent with observations, while the traditional wind‐only parameterization used in most global models slightly underestimates the observations of gas transfer velocity. We produce a climatology of the sea state dependent gas transfer velocity using reanalysis wind and wave data spanning 1980–2017. The climatology shows that the enhanced gas transfer velocity occurs frequently in regions with developed sea states (with strong wave breaking and high significant wave height). The present study provides a general sea state dependent parameterization for gas transfer, which can be implemented in global coupled models. 
    more » « less
  3. ; ; ; ; ; (, Journal of Geophysical Research: Space Physics)
    Abstract Most ionospheric models cannot sufficiently reproduce the observed electron density profiles in the E‐region ionosphere, since they usually underestimate electron densities and do not match the profile shape. Mitigation of these issues is often addressed by increasing the solar soft X‐ray flux which is ineffective for resolving data‐model discrepancies. We show that low‐resolution cross sections and solar spectral irradiances fail to preserve structure within the data, which considerably impacts radiative processes in the E‐region, and are largely responsible for the discrepancies between observations and simulations. To resolve data‐model inconsistencies, we utilize new high‐resolution (0.001 nm) atomic oxygen (O) and molecular nitrogen (N2) cross sections and solar spectral irradiances, which contain autoionization and narrow rotational lines that allow solar photons to reach lower altitudes and increase the photoelectron flux. This work improves upon Meier et al. (2007,https://doi.org/10.1029/2006gl028484) by additionally incorporating high‐resolution N2photoionization and photoabsorption cross sections in model calculations. Model results with the new inputs show increased O+production rates of over 500%, larger than those of Meier et al. (2007,https://doi.org/10.1029/2006gl028484) and total ion production rates of over 125%, while production rates decrease by ∼15% in the E‐region in comparison to the results obtained using the cross section compilation from Conway (1988,https://apps.dtic.mil/sti/pdfs/ADA193866.pdf). Low‐resolution molecular oxygen (O2) cross sections from the Conway compilation are utilized for all input cases and indicate that is a dominant contributor to the total ion production rate in the E‐region. Specifically, the photoionization contributed from longer wavelengths is a main contributor at ∼120 km. 
    more » « less
  4. ; ; ; ; (, Geophysical Research Letters)
    Abstract The electric fields of subauroral polarization streams (SAPS) have been suggested to affect energetic charged particles' dynamics in the inner magnetosphere, though their role on radiation belt electrons has never been properly quantified. A moderate geomagnetic storm on 2015‐09‐07 caused the deep injection of 10–100s of keV electrons in Earth's inner magnetosphere to low L* (L* < 4). Using a 2‐D test particle tracer, we present the effects of electric fields given by the Volland‐Stern model, a SAPS (Goldstein et al., 2005,https://doi.org/10.1029/2005ja011135) model, and a modified SAPS model on the energetic electron deep injections. The modified SAPS model reflects the SAPS electric field observations by the Van Allen Probes and is supported by Defense Meteorological Satellite Program observations. Simulations suggest that the SAPS electric field pushes 10–20 MeV/G electrons Earthward to L* ∼ 2.7 in 2.5 hr, much deeper compared to the Volland‐Stern electric field. 
    more » « less
  5. ; (, Geophysical Research Letters)
    Abstract We show that atmospheric gravity waves can generate plasma ducts and irregularities in the plasmasphere using the coupled SAMI3/WACCM‐X model. We find the equatorial electron density is irregular as a function of longitude which is consistent with CRRES measurements (Clilverd et al., 2007,https://doi.org/10.1029/2007ja012416). We also find that plasma ducts can be generated forL‐shells in the range 1.5–3.0 with lifetimes of ∼ 0.5 hr; this is in line with observations of ducted VLF wave propagation with lifetimes of 0.5–2.0 hr (Clilverd et al., 2008,https://doi.org/10.1029/2007ja012602; Singh et al., 1998,https://doi.org/10.1016/s1364-6826(98)00001-7). 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email