An official website of the United States government
Abstract Three-dimensional (3D) extrusion printing of cellular/acellular structures with biocompatible materials has been widely investigated in recent years. However, the requirement of a suitable solidification rate of printable ink materials constrains the utilization of extrusion-based 3D printing techniques. In this study, the nanoclay yield-stress suspension-enabled extrusion-based 3D printing system has been investigated and demonstrated to overcome solidification rate constraints during printing. Utilizing the liquid–solid transition property of nanoclay suspension, two fabrication approaches, including nanoclay support bath-enabled printing and nanoclay-enabled direct printing, have been proposed. For the former approach, nanoclay (Laponite® EP) has been used as a support bath material to fabricate alginate-based tympanic membrane patches. The constituents of alginate-based ink have been investigated to have the desired mechanical property of alginate-based tympanic membrane patches and facilitate the printing process. For the latter approach, nanoclay (Laponite® XLG) has been used as an internal scaffold material to help print poly (ethylene glycol) diacrylate (PEGDA)-based neural chambers, which can be further cross-linked in air. Mechanical stress analysis has been performed to explore the geometric limitation of printable Laponite® XLG-PEGDA neural chambers.
more »
« less
This content will become publicly available on October 14, 2025
Advanced Design and 3D Printing Strategies With Alginate‐Nanoclay Nanocomposites: From Microstructure to Bioprinting
Abstract Nanocomposites made from alginate and nanoclay are extensively applied for diverse biomedical applications. However, the lack of a clear understanding of the interactions between alginate and nanoclay makes it difficult to rationally design the nanocomposites for different material extrusion‐based 3D bioprinting strategies. Here, a combined analytical model is proposed to accurately predict the interaction mechanisms between alginate and nanoclay through small‐angle neutron scattering. These mechanisms are summarized into a phase diagram that can guide the design of alginate‐nanoclay nanocomposites for different bioprinting applications. The rheological properties of various nanocomposites are measured to validate the proposed interaction mechanisms at the macroscale. Accordingly, three representative extrusion‐based bioprinting strategies are linked with the nanocomposite design and applied to freeform fabricate complex structures. A roadmap is summarized to bridge the gap between biomaterial design and bioprinting processes, enabling the rapid and rational selection of biomaterial formula based on available 3D printing methods, and vice versa.
more »
« less
- Award ID(s):
- 2229004
- PAR ID:
- 10548751
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials Technologies
- Volume:
- 10
- Issue:
- 5
- ISSN:
- 2365-709X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Three-dimensional (3D) extrusion printing of cellular/acellular structures with biocompatible materials has been widely investigated in recent years. However, the requirement of suitable solidification rate of printable ink materials constrains the utilization of extrusion-based 3D printing technique. In this study, the yield-stress nanoclay suspension-enabled extrusion-based 3D printing system has been investigated and demonstrated to overcome solidification rate constraints during printing. Utilizing the liquid-solid transition property of nanoclay suspension, two fabrication approaches, including nanoclay support bath-enabled printing and nanoclay-enabled direct printing, have been proposed. For the former approach, nanoclay (Laponite EP) has been used as a support bath material to fabricate alginate-based tympanic membrane patches. The constituents of alginate-based ink have been investigated to have the desired mechanical property of alginate-based tympanic membrane patches and facilitate the printing process. For the latter approach, nanoclay (Laponite XLG) has been used as an internal scaffold material to help print poly (ethylene glycol) diacrylate (PEGDA)-based neural chambers, which can be further cross-linked in air. Mechanical stress analysis has been performed to explore the geometric limitation of printable Laponite XLG-PEGDA neural chambers.more » « less
-
Abstract IntroductionCoaxial 3D bioprinting has advanced the formation of tissue constructs that recapitulate key architectures and biophysical parameters for in-vitro disease modeling and tissue-engineered therapies. Controlling gene expression within these structures is critical for modulating cell signaling and probing cell behavior. However, current transfection strategies are limited in spatiotemporal control because dense 3D scaffolds hinder diffusion of traditional vectors. To address this, we developed a coaxial extrusion 3D bioprinting technique using ultrasound-responsive gene delivery bioinks. These bioink materials incorporate echogenic microbubble gene delivery particles that upon ultrasound exposure can sonoporate cells within the construct, facilitating controllable transfection. MethodsPhospholipid-coated gas-core microbubbles were electrostatically coupled to reporter transgene plasmid payloads and incorporated into cell-laden alginate bioinks at varying particle concentrations. These bioinks were loaded into the coaxial nozzle core for extrusion bioprinting with CaCl2crosslinker in the outer sheath. Resulting bioprints were exposed to 2.25 MHz focused ultrasound and evaluated for microbubble activation and subsequent DNA delivery and transgene expression. ResultsCoaxial printing parameters were established that preserved the stability of ultrasound-responsive gene delivery particles for at least 48 h in bioprinted alginate filaments while maintaining high cell viability. Successful sonoporation of embedded cells resulted in DNA delivery and robust ultrasound-controlled transgene expression. The number of transfected cells was modulated by varying the number of focused ultrasound pulses applied. The size region over which DNA was delivered was modulated by varying the concentration of microbubbles in the printed filaments. ConclusionsOur results present a successful coaxial 3D bioprinting technique designed to facilitate ultrasound-controlled gene delivery. This platform enables remote, spatiotemporally-defined genetic manipulation in coaxially bioprinted tissue constructs with important applications for disease modeling and regenerative medicine.more » « less
-
Among various available 3D bioprinting techniques, extrusion-based three-dimensional (3D) bioprinting allows the deposition of cell-laden bioink, ensuring predefined scaffold architecture that may offer living tissue regeneration. With a combination of unique characteristics such as biocompatibility, less cell toxicity, and high water content, natural hydrogels are a great candidate for bioink formulation for the extrusion-based 3D bioprinting process. However, due to its low mechanical integrity, hydrogel faces a common challenge in maintaining structural integrity. To tackle this challenge, the rheological properties, specifically the shear thinning behavior (reduction of viscosity with increasing the applied load/shear rate on hydrogels) of a set of hybrid hydrogels composed of cellulose-derived nanofiber (TEMPO-mediated nano-fibrillated cellulose, TO-NFC), carboxymethyl cellulose (CMC), and commonly used alginate, were explored. A total of 46 compositions were prepared using higher (0.5% and 1.0%) and lower percentages (0.005% and 0.01%) of TO-NFC, 1–4% of CMC, and 1–4% of alginate to analyze the shear thinning factors such as the values of n and K, which were determined for each composition from the flow diagram and co-related with the 3D printability. The ability to tune shear thinning factors with various ratios of a nanofiber can help achieve a 3D bio-printed scaffold with defined scaffold architecture.more » « less
-
Abstract Among various available 3D bioprinting techniques, extrusion-based three-dimensional (3D) bio-printing allows the deposition of cell-laden bio-ink, ensuring predefined scaffold architecture that may offer living tissue regeneration. With a combination of unique characteristics such as biocompatibility, less cell toxicity, and high-water content, natural hydrogels are a great candidate for bio-ink formulation for the extrusion-based 3D bioprinting process. However, due to its low mechanical integrity, hydrogel faces a common challenge in maintaining structural ty. To tackle this challenge, we characterized the rheological properties of a set of hybrid hydrogels composed of cellulose-derived nanofiber (TEMPO-mediated nano-fibrillated cellulose, TONFC), carboxymethyl cellulose (CMC) and commonly used alginate. A total of 46 compositions were prepared using higher (0.5% and 1.0%) and lower percentages (0.005% and 0.01%) of TONFC, 1%–4% of CMC, and 1%–4% of alginate to analyze the rheological properties. The shear thinning coefficients of n and K were determined for each composition from the flow diagram and co-related with the 3D printability. The ability to control rheological properties with various ratios of a nanofiber can help achieve a 3D bio-printed scaffold with defined scaffold architecture.more » « less
