More Like this

1. On the Replicability of the Thermodynamic Modeling of Spectroscopic Titration Data in the Nickel(II) En System

   https://doi.org/10.1002/cem.3619  

   Lawler, Fenton C.; Storteboom, Ryan S.; Rosales‐Lopez, Plinio D.; Hoogstra, Madison N.; Selvaggio, Katherine J.; Chen, Trevina; Zogg, Krista A.; Heule, Dafna L.; Pehrson, Noah J.; Baker, Aerin E.; et al (October 2024, Journal of Chemometrics)

   ABSTRACT Characterizing complicated solution phase systems in situ requires advanced modeling techniques to capture the intricate balances between the many chemical species. Due to the error inherent in any scientific measurement, a spectrophotometric titration experiment with nickel(II) and ethylenediamine (en) was repeated six times using an autotitrator to test the replicability of the data and the consistency of the resulting thermodynamic model. All six datasets could be modeled very tightly (R² > 99.9999%) with the following eight complexes: [Ni]²⁺, [Ni₂en]⁴⁺, [Nien]²⁺, [Ni₂en₃]⁴⁺, [Nien₂]²⁺, [Ni₂en₅]⁴⁺, [Nien₃]²⁺, and [Nien₆]²⁺. The logK values for the stepwise associative reactions agree with existing literature values for the majority species ([Nien_{n = 1–3}]²⁺) and matched expectations for the minority species; 95% confidence intervals for each logK value were determined via bootstrapping, which quantifies the variability in the binding constant value that is supported by a given dataset. The repeated experiments, which could not be successfully concatenated together, demonstrate that replication is crucial to capturing all the variability in the logK values. Conversely, bootstrapped confidence intervals across multiple experiments can be readily combined to generate an appropriate range for an experimentally determined binding constant. 

   more » « less
2. Structural diversity in copper(I) iodide complexes with 6-thioxopiperidin-2-one, piperidine-2,6-dithione and isoindoline-1,3-dithione ligands

   https://doi.org/10.1107/S2056989020009676  

   Wheaton, Amelia M.; Guzei, Ilia A.; Berry, John F. (August 2020, Acta Crystallographica Section E Crystallographic Communications)

   null (Ed.)

   Copper(I) iodide complexes are well known for displaying a diverse array of structural features even when only small changes in ligand design are made. This structural diversity is well displayed by five copper(I) iodide compounds reported here with closely related piperidine-2,6-dithione (SNS), isoindoline-1,3-dithione (SNS6), and 6-thioxopiperidin-2-one (SNO) ligands: di-μ-iodido-bis[(acetonitrile-κ N )(6-sulfanylidenepiperidin-2-one-κ S )copper(I)], [Cu 2 I 2 (CH 3 CN) 2 (C 5 H 7 NOS) 2 ] ( I ), bis(acetonitrile-κ N )tetra-μ 3 -iodido-bis(6-sulfanylidenepiperidin-2-one-κ S )- tetrahedro -tetracopper(I), [Cu 4 I 4 (CH 3 CN) 4 (C 5 H 7 NOS) 4 ] ( II ), catena -poly[[(μ-6-sulfanylidenepiperidin-2-one-κ 2 O : S )copper(I)]-μ 3 -iodido], [CuI(C 5 H 7 NOS)] n ( III ), poly[[(piperidine-2,6-dithione-κ S )copper(I)]-μ 3 -iodido], [CuI(C 5 H 7 NS 2 )] n ( IV ), and poly[[(μ-isoindoline-1,3-dithione-κ 2 S : S )copper(I)]-μ 3 -iodido], [CuI(C 8 H 5 NS 2 )] n ( V ). Compounds I and II crystallize as discrete dimeric and tetrameric complexes, whereas III , IV , and V crystallize as polymeric two-dimensional sheets. To the best of our knowledge, compound III is the first instance of an extended hexagonal [Cu 3 I 3 ] structure that is not supported by bridging ligands. Structures I , II , and IV display weak to moderately strong Cu...Cu cuprophilic interactions [Cu...Cu internuclear distances range between 2.5803 (10) and 2.8485 (14) Å]. All structures except III display weak hydrogen-bonding interactions between the N—H of the ligand and the μ 2 and μ 3 -I − atoms. Structure III contains classical N–H...O interactions between the SNO ligands that connect the molecules in a three-dimensional framework. Complex V features π–π stacking interactions between the aryl rings of the SNS6 ligands within the same polymeric sheet. In structure IV , there were three partially occupied solvent molecules of dichloromethane and one partially occupied molecule of acetonitrile present in the asymmetric unit. The SQUEEZE routine [Spek (2015). Acta Cryst . C 71 , 9–18] was used to correct the diffraction data for diffuse scattering effects and to identify the solvent molecules. The given chemical formula and other crystal data do not take into account the solvent molecules. 

   more » « less
3. A Copper(II)‐Nitrite Complex Hydrogen‐Bonded to a Protonated Amine in the Second‐Coordination‐Sphere

   https://doi.org/10.1002/ejic.202200105  

   Gupta, Shourya; Arora, Sumangla; Mondal, Aditesh; Stieber, S_Chantal_E; Gupta, Puneet; Kundu, Subrata (May 2022, European Journal of Inorganic Chemistry)

   Abstract Nitrous acid (HONO) plays pivotal roles in various metal‐free as well as metal‐mediated routes relevant to biogeochemistry, atmospheric chemistry, and mammalian physiology. While the metastable nature of HONO hinders the detailed investigations into its reactivity at a transition metal site, this report herein utilizes a heteroditopic copper(II) cryptate [oC]Cu^IIfeaturing a proton‐responsive second‐coordination‐sphere located at a suitable distance from a [Cu^II](ONO) core, thereby enabling isolation of a [Cu^II](κ¹‐ONO⋅⋅⋅H⁺) complex (2H‐NO₂). A set of complementary analytical studies (UV‐vis,¹⁴N/¹⁵N FTIR,¹⁵N NMR, HRMS, EPR, and CHN) on2H‐NO₂and its¹⁵N‐isotopomer (2H‐¹⁵NO₂) reveals the formulation of2H‐NO₂as {[oCH]Cu^II(κ¹‐ONO)}(ClO₄)₂. Non‐covalent interaction index (NCI) based on reduced density gradient (RDG) analysis on {[oCH]Cu^II(κ¹‐ONO)}²⁺discloses a H‐bonding interaction between the apical 3° ammonium site and the nitrite anion bound to the copper(II) site. The FTIR spectra of [Cu^II](κ¹‐ONO⋅⋅⋅H⁺) species (2H‐NO₂) shows a shift of ammonium NH vibrational feature to a lower wavenumber due to the H‐bonding interaction with nitrite. The reactivity profile of [Cu^II](κ¹‐ONO⋅⋅⋅H⁺) species (2H‐NO₂) towards anaerobic nitration of substituted phenol (2,4‐DTBP) is distinctly different relative to that of the closely related tripodal [Cu^II]‐nitrite complexes (1‐NO₂/3‐NO₂/4‐NO₂). 

   more » « less
4. Structure and magnetic characterization of some bicompartmental [N ₆ O ₂ ] divalent metal( ii ) complexes using bis(phenolato) ligands bearing two pendant bis(pyridyl) amine arms

   https://doi.org/10.1039/d3nj02380j  

   Mautner, Franz A.; Fischer, Roland C.; Torvisco, Ana; Nakashima, Kai; Handa, Makoto; Mikuriya, Masahiro; Salem, Nahed M.; Overby, Gabriel J.; Maier, Madison R.; Louka, Febee R.; et al (August 2023, New Journal of Chemistry)

   Reactions of the bicompartmental bis(phenolato) compound 6,6′-methylenebis(2-((bis(pyridin-2-ylmethyl)amino)methyl)-4-chlorophenol)hemihydrate (H 2 L ½H 2 O) with 3d metal( ii ) ions afforded novel fully structurally characterized bridged acetato dinuclear complexes [Mn 2 (HL)(μ 1,2 -OAc) 2 ]PF 6 (1) [Zn 2 (HL)(μ 1,2 -OAc)(H 2 O) 0.75 (MeOH) 0.25 ](PF 6 ) 2 ·0.45(H 2 O) (5) and [Cd 2 (HL)(μ 1,1,2 -OAc)(OAc)(H 2 O)]PF 6 ·H 2 O (6) as well as the polymeric bridged-azido tetranuclear catena -[Cu 4 (HL) 2 (μ 1,1 -N 3 ) 2 (μ 1,3 -N 3 ) 2 ](NO 3 ) 2 ·5H 2 O (4). The complex [Cu 4 (HL) 2 (ClO 4 ) 3 (H 2 O) 5 ](ClO 4 ) 3 ·5H 2 O (2) was partially characterized. In addition, three more dinuclear complexes [Cu 2 (H 2 L)(NO 3 ) 2 (H 2 O) 2 ](NO 3 ) 2 (3), [Cu 2 (HL)(OAc)(CH 3 OH)](PF 6 ) 2 (7) and [Cu 2 (HL)(NCS) 2 ]NO 3 ·2H 2 O (8) were also isolated. All complexes were characterized by CHN elemental analysis, IR and UV-Vis spectroscopy, ESI-MS, conductivity measurements and X-ray single crystal crystallography for compounds 1, 4, 5 and 6, where the bis(phenolato) ligand displayed different deprotonation (H 2 L, HL − and L 2− ). The magnetic susceptibility measurements over the temperature range 2–300 K revealed very weak antiferromagnetic coupling in dimanganese( ii ) 1 ( J = −1.64(1) cm −1 ) and almost negligible magnetic interaction in dicopper( ii ) 2 ( J = 0(3) cm −1 ). In the azido catena -[Cu 4 (HL) 2 (μ 1,1 -N 3 ) 2 (μ 1,3 -N 3 ) 2 ](NO 3 ) 2 ·5H 2 O (4) complex, the J value of −133(3) cm −1 was obtained upon moderate-to-strong antiferromagnetic coupling through the di-μ 1,3 -N 3 -bridged dicopper( ii ) unit with no magnetic interaction between the two copper( ii ) ions in the di-μ 1,1 -N 3 -bridged unit. 

   more » « less
5. Optimization of Copper-Ammonia-Sulfate Electrolyte for Maximizing Cu(I):Cu(II) Ratio Using pH and Copper Solubility

   https://doi.org/10.3390/waste2040022  

   Ali, Zulqarnain Ahmad; Werner, Joshua M (December 2024, Waste)

   An investigation has been carried out to understand the solution chemistry of the Cu-NH−-SO4−2 system, focusing on the effect of pH on the solubility of copper in the solution and maximizing the Cu(I):Cu(II) ratio. A Pourbaix diagram for the Cu-N-S system has also been created using the HSC Chemistry software for a wide range of Cu-NH3 species, unlike most other studies that focused only on Cu(NH3)42+ and Cu(NH3)52+ (Cu(II)) as the dominant species. The Pourbaix diagram demonstrated that the Cu(I) exists as Cu(NH3)2+, while the Cu(II) species are present in the system as Cu(NH3)42+ and Cu(NH3)52+, depending upon the Eh and pH of the solution. Copper precipitation was observed in the electrolyte at pH values less than 8.0, and the precipitation behavior increased as the pH became acidic. The highest Cu(I):Cu(II) ratio was observed at higher pH values of 10.05 due to the higher solubility of copper at higher alkaline pH. The maximum Cu(II) concentration can be achieved at 4.0 M NH4OH and 0.76 M (NH4)2SO4. In the case of low pH, the highest Cu(I):Cu(II) ratio obtained was 0.91 against the 4.0 M and 0.25 M concentrations of NH4OH and (NH4)2SO4, respectively. Meanwhile, at high pH, the maximum Cu(I):Cu(II) ratio was 15.11 against the 0.25 M (NH4)2SO4 and 4.0 M NH4OH. Furthermore, the low pH experiments showed the equilibrium constant (K) K < 1, and the high pH experiments demonstrated K > 1, which justified the lower and higher copper concentrations in the solution, respectively. 

   more » « less