An official website of the United States government
We have prepared a new series of nickel phosphine phosphonate ester complexes that feature two metal-chelating polyethylene glycol (PEG) side arms. Metal binding and reactivity studies in polar solvents showed that they readily coordinate external cations, including alkali (Li + , Na + , K + ), alkaline (Mg 2+ , Ca 2+ ), transition (Sc 3+ , Co 2+ , Zn 2+ ), post-transition (Ga 3+ ), and lanthanide (La 3+ ) metals. Although olefin polymerization reactions are typically performed in non-polar solvents, which cannot solubilize +2 and +3 metal cations, we discovered that our nickel catalysts could promote ethylene polymerization in neat tetrahydrofuran. This advance allowed us, for the first time, to systematically investigate the effects of a wide range of M + , M 2+ , and M 3+ ions on the reactivity of nickel olefin polymerization catalysts. In ethylene homopolymerization, the addition of Co(OTf) 2 to our nickel-PEG complexes provided the largest boost in activity (up to 11-fold, 2.7 × 10 6 g mol −1 h −1 ) compared to that in the absence of external salts. The catalyst enhancing effects of secondary metals were also observed in studies of ethylene and polar olefin ( e.g. , propyl vinyl ether, allyl butyl ether, methyl-10-undecenoate, and 5-acetoxy-1-pentene) copolymerization. Notably, combining either Co 2+ or Zn 2+ with our nickel complexes increased the rates of polymerization in the presence of propyl vinyl ether by about 5.0- and 2.4-fold, respectively. Although further studies are needed to elucidate the structural and mechanistic roles of the secondary metals, this work is an important advance toward the development of cation-switchable polymerization catalysts.
more »
« less
Optimizing the Cation Binding Pocket in Nickel Phenoxyimine Catalysts Improves Ethylene Polymerization Efficiency
Cation tuning is a simple yet powerful strategy to modulate the reactivity of polymerization catalysts but the design rules to achieve maximum cation effects are not well understood. In the present work, it was demonstrated that inserting a methylene spacer between a nickel phenoxyimine complex and an M-polyethylene glycol (PEG) (where M = Li+, Na+, K+, or Cs+) unit led up to >70-fold increase in ethylene polymerization activity and 6-fold higher polymer molecular weight relative to that of the first-generation catalysts. It is hypothesized that these effects are due to the exclusive formation of 1:1 over 2:1 nick-el:alkali species and closer proximity of the M-PEG moiety to the nickel center. These results suggest that the successful creation of cation-responsive catalysts requires an understanding of the cation binding stoichiometry as well as the structural and electronic changes associated with its host-guest interactions.
more »
« less
- Award ID(s):
- 2154532
- PAR ID:
- 10553353
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- Organometallics
- Volume:
- 43
- Issue:
- 20
- ISSN:
- 0276-7333
- Page Range / eLocation ID:
- 2643-2650
- Subject(s) / Keyword(s):
- cation-tuning olefin polymerization catalyst design
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The industrial synthesis of functional polyolefins relies on free radical polymerization, which requires high temperature and pressure and offers poor microstructure control. Herein, we report a cation-switching strategy to access ethylene and alkyl acrylate copolymers with made-to-order molecular weight, molecular weight distribution, and polar monomer density, tunable within a catalyst-dependent range. This precision was achieved by exploiting the cation exchange dynamics between M+ and M′+ (where M+, M′+ = Li+, Na+, K+, or Cs+, and M ≠ M′) with our nickel phenoxyphosphine-polyethylene glycol catalyst. Under non-switching conditions, copolymerization of ethylene and methyl acrylate (MA) using our nickel catalyst in the presence of M+ and M′+ salts afforded ethylene-MA copolymers (EMA) with adjustable molecular weight distributions based on the ratio of M+ : M′+ employed. Under dynamic cation switching conditions, this catalyst system yielded monomodal EMA with molecular weight and MA incorporation that can be varied independently. Studies of the EMA revealed that while they retain the thermal and mechanical properties of polyethylene having the same molecular weight, increasing the MA per chain by as few as 1–3 units leads to measurable increase in their wettability and susceptibility toward oxidative cleavage. This work adds to a growing body of evidence suggesting that ethylene-based materials can be designed for improved degradability without compromising their performance.more » « less
-
We have successfully applied a pendent Lewis acid design strategy to enhance the ethylene polymerization rates of nickel phenoxyphosphine catalysts. Our heterobimetallic complex is among one of the most productive coordination insertion catalysts reported to date for nickel. Due to its tendency to generate large reaction exotherms, it is necessary to apply continuous temperature control and low catalyst loading to achieve optimal efficiency.more » « less
-
Abstract Helical poly(isocyanide)s are an important class of synthetic polymers possessing a static helical structure. Since their initial discovery, numerous examples of these helices have been fabricated. In this contribution, the synthesis of a chiral, azobenzene (azo)‐containing isocyanide monomer is reported. Upon polymerization with nickel(II) catalysts, a well‐defined circular dichroism (CD) trace is obtained, corresponding to the formation of a right‐handed polymeric helix. The helical polymer, dissolved in chloroform and irradiated with UV light (365 nm), undergoes acistotransisomerization of the azobenzene side‐chains. After the isomerization, a change in conformation of the helix occurs, as evidenced by CD spectroscopy. When the solution is irradiated with LED light, the polymer returns to a right‐handed helical conformation. To open up the possibility for chain‐end post‐polymerization modification of this light‐responsive system, an alkyne‐functionalized nickel(II) catalyst is also used in the polymerization of the azobenzene monomer, resulting in a stimuli‐responsive, terminal‐alkyne‐containing helical poly(isocyanide).more » « less
-
A library of structurally related heterocycles containing N-H motifs are explored as ring-opening polymerization (ROP) pre-catalysts. Upon deprotonation of these heterocycles with appropriate bases, corresponding salts are formed, which catalyze the ROP of various lactones and cyclic carbonates, affording polymers with dispersity values ranging from 1.01 to 1.12. These catalysts exhibit a wide range of catalytic activities, spanning over seven orders of magnitude (>107), with their relative rates generally correlating to the pKa of the N-H group in the neutral heterocycle. Despite apparent structural and electronic similarities, these heterocycle catalysts display markedly different kinetic behaviors regarding the identity of different cations. Kinetic and NMR studies have revealed two distinct sets of mechanisms: small alkali metal cations such as Li+ and Na+ reduce the activity of imidazol(in)e derived catalysts due to their tendency to associate with the alkoxide chain-end, thus inhibiting its propagation; conversely, these cations form robust cation-π assemblies with indolocarbazole anions, simultaneously binding and activating monomer carbonyls towards the nucleophilic attack, resulting in a significant rate enhancement. This distinctive activation motif of the indolocarbazole sets it apart from other catalysts by utilizing cations as a potent handle for modulating polymerization reactivity. Coupled with its high availability, good solubility, high activity, moderate basicity, and high selectivity, the indolocarbazole heterocycle emerges as one of the most versatile organocatalysts for ring-opening polymerization.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acs.organomet.4c00260
