An official website of the United States government
Lithium-ion battery cathode slurries have a microstructure that depends sensitively on how they are processed due to carbon black's (CB) evolving structure when subjected coating flows. While polyvinylidene difluoride (PVDF), one of the main components of the cathode slurry, plays an important role in modifying the structure and rheology of CB, a quantitative understanding is lacking. In this work, we explore the role of PVDF in determining the structural evolution of Super C65 CB in N-methyl-2-pyrrolidinone (NMP) with rheo-electric measurements. We find that PVDF enhances the viscosity of NMP resulting in a more extensive structural erosion of CB agglomerates with increasing polymer concentration and molecular weight. We also show that the relative viscosity of all suspensions can be collapsed by the fluid Mason number (Mnf), which compares the hydrodynamic forces imposed by the medium to cohesive forces holding CB agglomerates together. Using simultaneous rheo-electric measurements, we find at high Mnf, the dielectric strength (Δε) scales with Mnf, and the power-law scaling can be quantitatively predicted by considering the self-similar break up of CB agglomerates. The collapse of the relative viscosity and scaling of Δε both suggest that PVDF increases the hydrodynamic force of the suspending medium without directly changing the CB agglomerate structure. These findings are valuable for optimizing the rheology of lithium ion battery cathode slurries. We also anticipate that these findings can be extended to understand the microstructure of similar systems under flow.
more »
« less
Impact of Mixing Shear on Polymer Binder Molecular Weight and Battery Electrode Reproducibility
The viscosity and microstructure of Li-ion battery slurries and the performance of the resulting electrodes have been shown to depend on the mixing protocol. This work applies rheology to understand the impact of shear during mixing and polymer molecular weight on slurry microstructure and electrode performance. Mixing protocols of different shear intensity are applied to slurries of LiNi0.33Mn0.33Co0.33O2 (NMC), carbon black (CB), and polyvinyldiene difluoride (PVDF) in N-methyl-2-pyrrolidinone (NMP), using both high-molecular-weight (HMW) and low-molecular-weight (LMW) PVDF. Slurries of both polymers are observed to form colloidal gels under high-shear mixing, even though unfavorable interactions between high molecular weight PVDF and CB should prevent this microstructure from forming. Theoretical analysis and experimental results show that increasing shear rate during the polymer and particle mixing steps causes polymer scission to decrease the polymer molecular weight and allow colloidal gelation. In general, electrodes made from high molecular weight PVDF generally show increased rate capability. However, high shear rates lead to increased cell variability, possibly due to the heterogeneities introduced by polymer scission.
more »
« less
- Award ID(s):
- 1929755
- PAR ID:
- 10554681
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Batteries
- Volume:
- 10
- Issue:
- 2
- ISSN:
- 2313-0105
- Page Range / eLocation ID:
- 46
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Lithium-ion battery cathodes are manufactured by coating slurries, liquid suspensions that typically include carbon black (CB), active material, and polymer binder. These slurries have a yield stress and complex rheology due to CB’s microstructural response to flow. While optimizing the formulation and processing of slurries is critical to manufacturing defect-free and high-performance cathodes, engineering the shear rheology of cathode slurries remains challenging. In this study, we conducted simultaneous rheo-electric measurements on 3 wt% CB suspensions in N-methyl-2-pyrrolidone containing various loadings of active material NMC811 and polyvinylidene difluoride. Accounting for the changes in the infinite shear viscosity, the yield stress, and the medium viscosity due to the presence of NMC and polymers, we defined the differential relative viscosity. This differential relative viscosity, Δ𝜂𝑟, is a measure of the distance from the infinite shear rate, where carbon black agglomerates are fully broken down. We find that Δ𝜂𝑟 collapses all flow curves regardless of formulation with an empirical relationship Δ𝜂𝑟=2.18𝑀𝑛𝑓−0.92, indicating a quantitative prediction of the flow curve of cathode slurries across a wide range of formulation space. We then used electrical conductivity to identify and quantify shear-induced structure memory, evidenced in the ratio of the shear conductivity over the post-shear quiescent conductivity. We find that similar to the changes in the yield stress, increasing NMC concentration increases memory retention, and in contrast, the addition of PVDF erases memory effects. Our findings here will provide valuable insight into engineering the formulation and processing conditions of lithium-ion battery cathodes.more » « less
-
Abstract This study demonstrates fluorine‐free cross‐linked (meth)acrylate polymers as alternatives to polyvinylidene fluoride (PVDF) in LiNi0.33Mn0.33Co0.33O2(NMC111) cathodes. We determine the effects of thermal initiator content, polymer content, and curing environment for two polymer chemistries: a flexible acrylate polymer, and a stiff methacrylate polymer. Electrodes are manufactured and tested for final electrochemical performance and mechanical properties. The results show that the flexible acrylate polymer exhibits higher rate capability compared to the stiff methacrylate polymer because calendering fractures the brittle network of stiff polymer. Electrode adhesion to the current collector and cohesion between particles are found to be a strong function of thermal initiator ratio and oxygen inhibition. Furthermore, there exists an optimal binder concentration that maximizes rate capability performance. Under the right conditions, the two polymers exhibit comparable performance to PVDF electrodes. These results provide important implications for designing cross‐linked polymers as cathode binder alternatives to PVDF.more » « less
-
The research presented in this paper offers insight into the availability of intermediates in the depolymerization of polyethylene terephthalate (PET) to be used as feedstock to create value‐added products. Monitoring the dispersity, molecular weight, end groups, and crystallinity of reaction intermediates during the heterogeneous depolymerization of PET offers insight into the mechanism by which the polymer chains evolve during the reaction. Our results show dispersity decreases and crystallinity increases while the yield of insoluble PET remains high early in the reaction. Our interpretation of this data depicts a mechanism where chain scission targets amorphous tie chains between crystalline phases. Targeting the tie‐chains lowers the Mnof the polymer without changing the amount of recovered polymer flake. Chain scission of tie‐chains and isolating highly crystalline PET lowers the dispersity (Đ) of the polymer chains, as the size of the crystalline lamellae guides the molecular weight of the depolymerized oligomers. When sufficient end groups of PET chains are converted to alcohol groups, the PET flakes break apart into highly crystalline and less disperse polymer. Our results also demonstrate that the oligomeric depolymerization intermediates are readily repolymerized, offering new opportunities to chemically recycle PET more effectively and efficiently, from both an energy and purification standpoint.more » « less
-
Electron transport in complex fluids, biology, and soft matter is a valuable characteristic in processes ranging from redox reactions to electrochemical energy storage. These processes often employ conductor–insulator composites in which electron transport properties are fundamentally linked to the microstructure and dynamics of the conductive phase. While microstructure and dynamics are well recognized as key determinants of the electrical properties, a unified description of their effect has yet to be determined, especially under flowing conditions. In this work, the conductivity and shear viscosity are measured for conductive colloidal suspensions to build a unified description by exploiting both recent quantification of the effect of flow-induced dynamics on electron transport and well-established relationships between electrical properties, microstructure, and flow. These model suspensions consist of conductive carbon black (CB) particles dispersed in fluids of varying viscosities and dielectric constants. In a stable, well-characterized shear rate regime where all suspensions undergo self-similar agglomerate breakup, competing relationships between conductivity and shear rate were observed. To account for the role of variable agglomerate size, equivalent microstructural states were identified using a dimensionless fluid Mason number, , which allowed for isolation of the role of dynamics on the flow-induced electron transport rate. At equivalent microstructural states, shear-enhanced particle–particle collisions are found to dominate the electron transport rate. This work rationalizes seemingly contradictory experimental observations in literature concerning the shear-dependent electrical properties of CB suspensions and can be extended to other flowing composite systems.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/batteries10020046
