Attention:The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, August 13 until 12:00 AM ET on Friday, August 14 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Multifunctional Biocomposite Materials from Chlorella vulgaris Microalgae
Abstract Extrusion 3D‐printing of biopolymers and natural fiber‐based biocomposites enables the fabrication of complex structures, ranging from implants' scaffolds to eco‐friendly structural materials. However, conventional polymer extrusion requires high energy consumption to reduce viscosity, and natural fiber reinforcement often requires harsh chemical treatments to improve adhesion. We address these challenges by introducing a sustainable framework to fabricate natural biocomposites usingChlorella vulgarismicroalgae as the matrix. Through bioink optimization and process refinement, we produced lightweight, multifunctional materials with hierarchical architectures. Infrared spectroscopy analysis reveals that hydrogen bonding plays a critical role in the binding and reinforcement ofChlorellacells by hydroxyethyl cellulose (HEC). As water content decreases, the hydrogen bonding network evolves from water‐mediated interactions to direct hydrogen bonds between HEC andChlorella, enhancing the mechanical properties. A controlled dehydration process maintains continuous microalgae morphology, preventing cracking. The resulting biocomposites exhibit a bending stiffness of 1.6 GPa and isotropic heat transfer and thermal conductivity of 0.10 W/mK at room temperature, demonstrating effective thermal insulation. These characteristics makeChlorellabiocomposites promising candidates for applications requiring both structural performance and thermal insulation, offering a sustainable alternative to conventional materials in response to growing environmental demands.  more » « less
Award ID(s):
2308575
PAR ID:
10561336
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Advanced Materials
ISSN:
0935-9648
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, SAMPE 2023 Proceedings)
    Beckwith, S.; Flinn, B.; Dustin, J. (Ed.)
    A novel additive manufacturing process utilizing the laminated object manufacturing (LOM) technology with woven natural fiber-reinforced biopolymer is investigated in this paper. Traditional synthetic composite materials are products from nonrenewable crude oil with limited end-of-life options, and therefore not environmentally friendly. The continuous woven natural fiber is used to significantly strengthen the mechanical properties of biocomposites and PLA biopolymer as the matrix made the material completely biodegradable. This is one of the promising replacements for synthetic composites in applications such as automotive panels, constructive materials, and sports and musical instruments. A LOM 3D printer prototype has been designed and built by the team using a laser beam in cutting the woven natural fiber reinforcement and molten PLA powder to bind layers together. Tensile and flexural properties of the LOM 3D printed biocomposites were measured using ASTM test standards and then compared with corresponding values measured from pure PLA specimens 3D printed through FDM. Improved mechanical properties from LOM 3D-printed biocomposites were identified by the team. SEM imaging was performed to identify the polymer infusing and fiber-matrix binding situations. This research took advantage of both the material and process’s benefits and combine them into one sustainable practice. 
    more » « less
  2. ; ; ; ; (, Journal of Manufacturing Science and Engineering)
    Abstract Thermal insulation materials reduce heat transfer and are typically made from materials like fiberglass, foam, or mineral wool, which are engineered to trap air and hinder heat conduction and convection. The traditional manufacturing processes of thermal insulation materials are often energy-intensive and result in significant greenhouse gas emissions. In the current global drive for sustainability, these energy-intensive manufacturing processes raise environmental concerns and need to be addressed. In this work, with the objective of addressing both material sustainability and manufacturing sustainability, we present an additive manufacturing strategy to fabricate biomass materials for thermal insulation applications. We propose utilizing wheat straw as a biomass feedstock for manufacturing sustainable thermal insulation. This approach captures carbon during growth and stores it within the insulation structure. In the presented work, we first demonstrate the formulation of a 3D-printable ink using chopped straw fibers. We conduct comprehensive rheological characterizations to reveal the shear-thinning properties and the printability of the straw fiber ink. Utilizing the direct ink writing (DIW) process, the straw fiber material is deposited into 3D structures. Through material characterization tests, which include microstructure, mechanical, and thermal analyses, we demonstrate the low thermal conductivity and robust mechanical properties. This paper marks the first work of 3D printing of wheat straw fibers for thermal insulation structures. The discoveries in this pilot work demonstrate the potential to leverage additive manufacturing technologies and sustainable biomass materials to create both functional and value-added wheat straw parts tailored for thermal insulation applications. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Polymer Science)
    ABSTRACT Fabricating high‐performance, binder‐free biomaterials from microalgae grown during wastewater treatment is an opportunity in sustainable materials. However, the impact of strain morphology and mechanical preprocessing on material properties remains largely uncharacterized. This study investigates binder‐free biomaterials fabricated from wastewater‐grown, filamentousTribonema minusand food‐grade, unicellularChlorella vulgaris. The impact of three mechanical comminution methods (ball mill, mortar‐and‐pestle, and speed mixer) on the mechanical properties is evaluated. The results demonstrate that feedstock morphology and processing are critical, interacting factors. Under gentle comminution (mortar‐and‐pestle), filamentousTribonemabiomaterials exhibit significantly higher flexural modulus and strength than unicellularChlorella. Conversely, high‐shear speed mixing diminishesTribonema's structural advantage while enhancingChlorella's particle packing, leading to a convergence in mechanical properties. All final biomaterials exhibit near‐hydrophobic surfaces (contact angles > 85°). This research validates that non‐food‐competing wastewater algae can be transformed into high‐performance biomaterials, yielding materials with densities of ≈1.0–1.1 g/cm3and flexural moduli ranging from ≈0.3 to 1.0 GPa. 
    more » « less
  4. ; ; ; ; ; (, Frontiers in Materials)
    The utilization of multifunctional composite materials presents significant advantages in terms of system efficiency, cost-effectiveness, and miniaturization, making them highly valuable for a wide range of industrial applications. One approach to harness the multifunctionality of carbon fiber reinforced polymer (CFRP) is to integrate it with a secondary material to form a hybrid composite. In our previous research, we explored the use of carbonaceous material derived from coconut shells as a sustainable alternative to inorganic fillers, aiming to enhance the out-of-plane mechanical performance of CFRP. In this study, our focus is to investigate the influence of carbonized coconut shell particles on the non-structural properties of CFRP, specifically electromagnetic interference (EMI) shielding, thermal stability, and water absorption resistance. The carbonized material was prepared by thermal processing at 400 °C. Varying proportions of carbonized material, ranging from 1% to 5% by weight, were thoroughly mixed with epoxy resin to form the matrix used for impregnating woven carbon fabric with a volume fraction of 29%. Through measurements of scattering parameters, we found that the hybrid composites with particle loadings up to 3% exhibited EMI shielding effectiveness suitable for industrial applications. Also, incorporating low concentrations of carbonized particle to CFRP enhances the thermal stability of hybrid CFRP composites. However, the inclusion of carbonized particle to CFRP has a complex effect on the glass transition temperature. Even so, the hybrid composite with 2% particle loading exhibits the highest glass transition temperature and lowest damping factor among the tested variations. Furthermore, when subjected to a 7-day water immersion test, hybrid composites with 3% or less amount of carbonized particle showed the least water absorption. The favorable outcome can be attributed to good interfacial bonding at the matrix/fiber interface. Conversely, at higher particle concentrations, aggregation of particles and formation of interfacial and internal pores was observed, ultimately resulting in deteriorated measured properties. The improved non-structural functionalities observed in these biocomposites suggest the potential for a more sustainable and cost-effective alternative to their inorganic-based counterparts. This advancement in multifunctional composites could pave the way for enhanced applications of biocomposites in various industries. 
    more » « less
  5. ; ; ; (, RSC Applied Polymers)
    Chitin nanofibrils isolated from mushrooms are formulated into polyester biocompositesviamelt-extrusion. The fungal-derived chitin materials show enhanced stiffness and degradability compared to shrimp-derived chitin counterparts. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email