More Like this

1. Tunneling Mode of Scanning Electrochemical Microscopy: Probing Electrochemical Processes at Single Nanoparticles

   https://doi.org/10.1002/anie.201801115  

   Sun, Tong; Wang, Dengchao; Mirkin, Michael V. (May 2018, Angewandte Chemie International Edition)

   Abstract Electrochemical experiments at individual nanoparticles (NPs) can provide new insights into their structure–activity relationships. By using small nanoelectrodes as tips in a scanning electrochemical microscope (SECM), we recently imaged individual surface‐bound 10–50 nm metal NPs. Herein, we introduce a new mode of SECM operation based on tunneling between the tip and a nanoparticle immobilized on the insulating surface. The obtained current vs. distance curves show the transition from the conventional feedback response to electron tunneling between the tip and the NP at separation distances of less than about 3 nm. In addition to high‐resolution imaging of the NP topography, the tunneling mode enables measurement of the heterogeneous kinetics at a single NP without making an ohmic contact with it. The developed method should be useful for studying the effects of nanoparticle size and geometry on electrocatalytic activity in real‐world applications. 

   more » « less
2. Bridging Colloidal and Electrochemical Nanoparticle Growth with In Situ Electrochemical Measurements

   https://doi.org/10.1021/acs.accounts.3c00112  

   Halford, Gabriel C.; Personick, Michelle L. (May 2023, Accounts of Chemical Research)
3. On-Demand Electrochemical Fabrication of Ordered Nanoparticle Arrays using Scanning Electrochemical Cell Microscopy

   https://doi.org/10.1021/acsnano.2c09336  

   Rahman, Md. Maksudur; Tolbert, Chloe L.; Saha, Partha; Halpern, Jeffrey M.; Hill, Caleb M. (November 2022, ACS Nano)

   Well-ordered nanoparticle arrays are attractive platforms for a variety of analytical applications, but the fabrication of such arrays is generally challenging. Here, it is demonstrated that scanning electrochemical cell microscopy (SECCM) can be used as a powerful, instantly reconfigurable tool for the fabrication of ordered nanoparticle arrays. Using SECCM, Ag nanoparticle arrays were straightforwardly fabricated via electrodeposition at the interface between a substrate electrode and an electrolyte-filled pipet. By dynamically monitoring the currents flowing in an SECCM cell, individual nucleation and growth events could be detected and controlled to yield individual nanoparticles of controlled size. Characterization of the resulting arrays demonstrate that this SECCM-based approach enables spatial control of nanoparticle location comparable with the terminal diameter of the pipet employed and straightforward control over the volume of material deposited at each site within an array. These results provide further evidence for the utility of probe-based electrochemical techniques such as SECCM as tools for surface modification in addition to analysis. 

   more » « less
4. Understanding the influence of the electrochemical double-layer on heterogeneous electrochemical reactions

   https://doi.org/10.1016/j.coche.2018.05.003  

   Dunwell, Marco; Yan, Yushan; Xu, Bingjun (June 2018, Current Opinion in Chemical Engineering)
5. Electrochemical epitaxy of nanostructures

   https://doi.org/10.1016/j.nwnano.2023.100024  

   Guo, Yuwei; Hu, Yang; Shi, Jian (December 2023, Nano Trends)