skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Biomimetic 3D-printed Composites: Ballistic Impact Resistance with Nacre-Inspired and Tubulane Structures
This research delves into nature-inspired designs for creating materials with exceptional impact resistance, leveraging cutting-edge 3D printing techniques. Our composite design features a nacre-like outer layer combined with a tubulane-resembling core, aiming to enhance energy dissipation significantly. By emulating the dense aragonite structure found in natural nacre and the unique porosity of tubulane, to enhance ballistic impact resistance. To validate its effectiveness, we conducted ballistics tests using a 40-grain lead-tipped .22 LR bullet at an initial velocity of 330.7 m/s, with a specialized chronograph setup to measure both initial and post-penetration bullet velocities, quantifying energy absorption precisely. This study opens new frontiers in aviation safety, structural engineering, and personal protective equipment, showcasing the transformative potential of biomimicry and additive manufacturing in advancing public safety and material science.  more » « less
Award ID(s):
2215884
PAR ID:
10562622
Author(s) / Creator(s):
; ;
Publisher / Repository:
SAMPE Journal
Date Published:
Journal Name:
SAMPE Journal
Volume:
60
Issue:
5
ISSN:
0091-1062
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; (, Science Advances)
    Lightweight and strong structural materials attract much attention due to their strategic applications in sports, transportation, aerospace, and biomedical industries. Nacre exhibits high strength and toughness from the brick-and-mortar–like structure. Here, we present a route to build nacre-inspired hierarchical structures with complex three-dimensional (3D) shapes by electrically assisted 3D printing. Graphene nanoplatelets (GNs) are aligned by the electric field (433 V/cm) during 3D printing and act as bricks with the polymer matrix in between as mortar. The 3D-printed nacre with aligned GNs (2 weight %) shows lightweight property (1.06 g/cm 3 ) while exhibiting comparable specific toughness and strength to the natural nacre. In addition, the 3D-printed lightweight smart armor with aligned GNs can sense its damage with a hesitated resistance change. This study highlights interesting possibilities for bioinspired structures, with integrated mechanical reinforcement and electrical self-sensing capabilities for biomedical applications, aerospace engineering, as well as military and sports armors. 
    more » « less
  2. ; ; ; (, Frontiers in Marine Science)
    Changing climatic conditions can have complex effects on the biomineralized segments of marine organisms, which in turn may influence individual fitness and survival. In nacreous shells, tablet thickness is one microstructural component that has been observed to positively correlate with ocean temperature, though the strength of this relationship is unclear, leaving unresolved whether temperature is a consistent predictor of tablet thickness and, if so, over what scales. Here we investigate the relationship between tablet thickness and temperature in two nacre-producing marine mollusks in the modern ocean. We explore the relationship between nacre tablet thickness and ocean temperature through a global analysis of present-day abalone (Haliotis) nacre, and a temporal analysis of nut clam (Nucula proxima) nacre using shells from individuals that lived before and after 1950 in two regions of the Gulf of Mexico. We document a positive relationship between tablet thickness and ocean temperature within and among closely-related species. For a given temperature, considerable variation was observed in nacre tablet thickness, indicating that other factors also contribute. While increased temperature is likely to cause larger biomineralized units within the calcified segments of marine organisms, other environmental factors might counter those changes, highlighting the need for work exploring the multimodal impact of anthropogenic climate change on biominerals. 
    more » « less
  3. ; ; ; ; ; ; (, Polymer Composites)
    Abstract This study presented the use of SrTiO3/Y2O3nanoparticles for the reinforcement of dental poly(methyl methacrylate) (PMMA) to enhance its mechanical properties important for everyday use of denture base materials. The average crystallite size of prepared nanoparticles was 19.9 nm. The influence of 0.5, 1.0, and 1.5 wt% SrTiO3/Y2O3loading on absorbed impact energy, microhardness and tensile properties was investigated. Scanning electron microscopy of the composite fracture surface revealed multiple toughening mechanisms, with agglomerates directly included in the crack pinning, indicating improvement in mechanical performance. Dynamic mechanical analysis proved that agglomerates improved the elastic behavior of PMMA and confirmed the absence of a residual monomer. After the incorporation of SrTiO3/Y2O3, the mechanical properties of composites showed a high increase compared to neat PMMA. The optimal concentration of nanoparticles was 1 wt%, for which the microhardness, modulus of elasticity, and absorbed impact energy were higher by 218.4%, 65.8% and 135.6%, respectively. With such a high increase, this research showed that SrTiO3/Y2O3represents an efficient filler which use does not have to be limited to dental materials. HighlightsSrTiO3/Y2O3hybrid nanoparticles were prepared.PMMA‐SrTiO3/Y2O3composite showed increase in impact resistance up to 135.4%.Elastic behavior of PMMA was improved.With 1 wt% of SrTiO3/Y2O3, microhardness increased by 218.4%. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, New Phytologist)
    Summary Embolism spreading in angiosperm xylem occurs via mesoporous pit membranes between vessels. Here, we investigate how the size of pore constrictions in pit membranes is related to pit membrane thickness and embolism resistance.Pit membranes were modelled as multiple layers to investigate how pit membrane thickness and the number of intervessel pits per vessel determine pore constriction sizes, the probability of encountering large pores, and embolism resistance. These estimations were complemented by measurements of pit membrane thickness, embolism resistance, and number of intervessel pits per vessel in stem xylem (n = 31, 31 and 20 species, respectively).The modelled constriction sizes in pit membranes decreased with increasing membrane thickness, explaining the measured relationship between pit membrane thickness and embolism resistance. The number of pits per vessel affected constriction size and embolism resistance much less than pit membrane thickness. Moreover, a strong relationship between modelled and measured embolism resistance was observed.Pore constrictions provide a mechanistic explanation for why pit membrane thickness determines embolism resistance, which suggests that hydraulic safety can be uncoupled from hydraulic efficiency. Although embolism spreading remains puzzling and encompasses more than pore constriction sizes, angiosperms are unlikely to have leaky pit membranes, which enables tensile transport of water. 
    more » « less
  5. ; ; ; (, New Phytologist)
    Summary Wood anatomical traits shape a xylem segment’s hydraulic efficiency and resistance to embolism spread due to declining water potential. It has been known for decades that variations in conduit connectivity play a role in altering xylem hydraulics. However, evaluating the precise effect of conduit connectivity has been elusive. The objective here is to establish an analytical linkage between conduit connectivity and grouping and tissue‐scale hydraulics.It is hypothesized that an increase in conduit connectivity brings improved resistance to embolism spread due to increased hydraulic pathway redundancy. However, an increase in conduit connectivity could also reduce resistance due to increased speed of embolism spread with respect to pressure. We elaborate on this trade‐off using graph theory, percolation theory and computational modeling of xylem. The results are validated using anatomical measurements ofAcerbranch xylem.Considering only species with vessels, increases in connectivity improve resistance to embolism spread without negatively affecting hydraulic conductivity. The often measured grouping index fails to capture the totality of the effect of conduit connectivity on xylem hydraulics.Variations in xylem network characteristics, such as conduit connectivity, might explain why hypothesized trends among woody species, such as the ‘safety‐efficiency’ trade‐off hypothesis, are weaker than expected. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email