<?xml-model href='http://www.tei-c.org/release/xml/tei/custom/schema/relaxng/tei_all.rng' schematypens='http://relaxng.org/ns/structure/1.0'?><TEI xmlns="http://www.tei-c.org/ns/1.0">
	<teiHeader>
		<fileDesc>
			<titleStmt><title level='a'>Photoredox Oxidation of Alkanes by Monometallic Copper–Oxygen Complexes Using Visible Light Including One Sun Illumination</title></titleStmt>
			<publicationStmt>
				<publisher>JACS</publisher>
				<date>10/23/2024</date>
			</publicationStmt>
			<sourceDesc>
				<bibl> 
					<idno type="par_id">10565400</idno>
					<idno type="doi">10.1021/jacs.4c08377</idno>
					<title level='j'>Journal of the American Chemical Society</title>
<idno>0002-7863</idno>
<biblScope unit="volume">146</biblScope>
<biblScope unit="issue">42</biblScope>					

					<author>Daniel L Nascimento</author><author>David Gygi</author><author>Matthew C Drummer</author><author>Miguel I Gonzalez</author><author>Shao-Liang Zheng</author><author>Daniel G Nocera</author>
				</bibl>
			</sourceDesc>
		</fileDesc>
		<profileDesc>
			<abstract><ab><![CDATA[Oxygenation of hydrocarbons offers versatile catalytic routes to more valuable compounds, such as alcohols, aldehydes and ketones. Despite the importance of monometallic copper-oxygen species as hydroxylating agents in biology, few synthetic model compounds are known to react with unactivated hydrocarbons owing to high C-H bond dissociation energies. To overcome this challenge, the photoredox chemistry of monometallic copper (pyrazolyl)borate complexes coordinated by chlorate has been explored in the presence of C1-C6 alkanes with BDEs ≥ 93 kcal/mol. Ethane is photooxidized at room temperature under N2 with yields of 15-30%, which increases to 77% for the most oxidizing tris(3,5-trifluoromethyl-pyrazolyl)borate complex (Cu-3). This complex also promotes the photooxidation of methane to methanol at significant yield (38%) when the photoredox reaction is run under aerobic conditions. Ligand modification alters reaction selectivity by tuning the redox potential. The ability to activate 1° C-H bonds of C1-C6 light alkanes using visible light is consistent with the photogeneration of a powerfully oxidizing copper-oxyl, which is supported by photocrystallographic studies of the (pyrazolyl)borate chlorate complex. Mechanistic studies are consistent with hydrogen atom abstraction of the C-H bond by the copper-oxyl intermediate. We demonstrate for Cu-3 with hexane as an exemplar, that the photoredox chemistry may be achieved under solar conditions of 1-sun illumination.]]></ab></abstract>
		</profileDesc>
	</teiHeader>
	<text><body xmlns="http://www.tei-c.org/ns/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xlink="http://www.w3.org/1999/xlink">
<div xmlns="http://www.tei-c.org/ns/1.0"><p>Oxidation of light alkanes into value-added liquid products is an important target for instituting sustainable chemical processes. <ref type="bibr">1</ref> Current methods for achieving such transformations require harsh energy inputs due to the inertness of the C-H bonds. Conversely, in nature, hydroxylation of alkanes is accomplished under mild conditions at the mono-and multi-metallic copper centers of oxygenases. <ref type="bibr">[2]</ref><ref type="bibr">[3]</ref><ref type="bibr">[4]</ref><ref type="bibr">[5]</ref><ref type="bibr">[6]</ref> The oxidation chemistry is induced when the Cu(II)-(hydr)oxo formal oxidation state is raised one level to Cu(III)-oxo, which may often be better formulated as a Cu(II)-oxyl radical (i.e., Cu II -O&#8226;) based on electronic considerations embodied by the "oxo wall". <ref type="bibr">7</ref> For example, in the most investigated multi-copper site-the particulate methane monooxygenase (pMMO) <ref type="bibr">8,</ref><ref type="bibr">9</ref> -a putative Cu II -O &#8226; in terminal or bridging coordination geometry is thought to be the oxidizing agent of methane. <ref type="bibr">10,</ref><ref type="bibr">11</ref> The prevalence of Cu II -O&#8226; as a hydroxylating agent of C-H bonds in biology has prompted efforts devoted to reproducing this intermediate in homogeneous complexes <ref type="bibr">[12]</ref><ref type="bibr">[13]</ref><ref type="bibr">[14]</ref><ref type="bibr">[15]</ref><ref type="bibr">[16]</ref> and heterogeneous <ref type="bibr">[17]</ref><ref type="bibr">[18]</ref><ref type="bibr">[19]</ref><ref type="bibr">[20]</ref><ref type="bibr">[21]</ref><ref type="bibr">[22]</ref><ref type="bibr">[23]</ref> materials. In contrast to the limited activity of mononuclear Cu II O-O &#8226; and Cu II O-OH adducts towards substrates, <ref type="bibr">[24]</ref><ref type="bibr">[25]</ref><ref type="bibr">[26]</ref><ref type="bibr">[27]</ref><ref type="bibr">[28]</ref><ref type="bibr">[29]</ref><ref type="bibr">[30]</ref><ref type="bibr">[31]</ref> Cu II -O &#8226; intermediates have been proposed to activate strong C-H bonds. <ref type="bibr">[32]</ref><ref type="bibr">[33]</ref><ref type="bibr">[34]</ref> Traditional approaches to generating mononuclear reactive copper species generally involve the reaction of Cu with reactive oxidants such as H2O2 and PhIO. <ref type="bibr">[34]</ref><ref type="bibr">[35]</ref><ref type="bibr">[36]</ref> The resulting copper intermediates of these oxidations are extremely reactive, thus requiring low temperatures for their observation. <ref type="bibr">[37]</ref><ref type="bibr">[38]</ref><ref type="bibr">[39]</ref><ref type="bibr">[40]</ref><ref type="bibr">[41]</ref><ref type="bibr">[42]</ref><ref type="bibr">[43]</ref><ref type="bibr">[44]</ref><ref type="bibr">[45]</ref> As an alternative strategy to thermal generation, reactive copper-based oxo intermediates may be accessed by photochemical and electrochemical methods. <ref type="bibr">46</ref> Irradiation of a tetradentate Cu complex bound by bromate with &gt;335 nm light over the course of 4 days leads to the generation of a Cu intermediate that is competent towards C-H oxidation (Figure <ref type="figure">1A</ref>). <ref type="bibr">47</ref> Kinetic isotope measurements revealed that C-H cleavage is the rate determining step of the reaction, likely a result of the relative stability of the Cuoxo moiety as evidenced by the inability to oxidize light alkanes such as pentane (BDE = 98 kcal/mol). For the case of the late transition metals, more reactive metal-oxos may be manifest in a pseudo-tetrahedral ligand field. <ref type="bibr">48,</ref><ref type="bibr">49</ref> Accordingly, we were intrigued with the ligand field offered by tris-pyrazolylborate (Tp R ), <ref type="bibr">50</ref> which has been employed to mimic the coordination environment of blue <ref type="bibr">51</ref> and green <ref type="bibr">52</ref> copper proteins. We now report that the Tp R complexes bearing a chlorate ligand, Cu-1 to Cu-4 (Figure <ref type="figure">1B</ref>), are active C-H photooxidation catalysts. All complexes are capable of photooxidizing light alkanes at room temperature with yields varying between 16-77%, including the photooxidization of methane to methanol by the best-performing Cu-3 complex, (6% anaerobic, 38% aerobic). The Tp R ligand field can be modified to tune the redox potential of Cu to be varied by &gt;400 mV. The higher yields and greater oxidation of 1&#176; C-H bonds are result of the increased oxidizing power of the copper center, consistent with the photogeneration of a powerfully oxidizing copper-oxyl. We demonstrate for Cu-3 with hexane as an exemplar, that the photoredox chemistry may be achieved under solar conditions of 1-sun illumination.</p><p>In the absence of a stable Cu(ClO3)2&#8226;xH2O salt, <ref type="bibr">53</ref> Cu-1 to Cu-4 were obtained from a metathesis reaction between CuBr2 and AgClO3. Single crystals of complexes suitable for X-ray diffraction analysis afforded the structures shown in Figure <ref type="figure">S1</ref> (and Table <ref type="table">S1</ref>). The Cu II site adopts a pseudosquare pyramidal geometry with chlorate adopting an &#954; 2 ligation. NMR spectra (Figure <ref type="figure">S2</ref>) are consistent with a paramagnetic ground state, as confirmed by EPR spectra, which display an axially symmetric Cu II with g&#8869; ranging between 2.06-2.07 and g|| between 2.29-2.34 (Figure <ref type="figure">S3</ref>). An ill-resolved 4-line signal arising from coupling to 63,65 Cu (I = 3/2) is observed with no distinguishable hyperfine coupling to the N atoms of the Tp R ligands. A g&#8869; &lt; g|| is suggestive of an unpaired electron in the dx2-y2 orbital of the ground state. <ref type="bibr">54</ref> The Cu II /Cu I oxidation-reduction potential is significantly modified by the Tp R ligand, which was assessed using the Cu I -CH3CN adducts (Cu-5 to Cu-8, Chart S1) so as to avoid the electrochemical irreversibility of the chlorate ligand (Figure <ref type="figure">S4</ref>). A potential ranging from -0.05 vs Fc + /Fc for the most reducing ligand (Tp Me ) to 0.5 V for the most oxidizing ligand (Tp <ref type="bibr">CF3</ref> ).</p><p>Complexes Cu-1 to Cu-4 exhibit a weak absorption in the red spectral region (Figure <ref type="figure">S5</ref>), consistent with d-d transitions, and a rising absorption in the UV spectral region. Irradiation into the UV absorption band of solutions of the complexes (10 mM Cu) and alkane substrates under N2 with a 390 nm Kessil LED lamp leads to a prompt and facile photoreactivity. Complex Cu-3 was used to investigate the reaction profile for the oxidation of ethane (Figure <ref type="figure">2A</ref>), which contains strong primary C-H bonds (BDE = 101 kcal/mol). Owing to the low solubility of ethane in organic solvents, <ref type="bibr">55</ref> the photoredox reaction was  <ref type="table">S3</ref>) at 18 h for Cu-1 to Cu-4.</p><p>Figure <ref type="figure">3</ref>. Photooxidation products of (A) propane (Table <ref type="table">S4</ref>) and (B) isobutane (Table <ref type="table">S5</ref>) by Cu-1 to Cu-4. Horizontal bar graphs show the selectivity for oxidized products generated from 1&#176; vs 2&#176; or 3&#176; C-H bond sites. Scatter plots show the relationship between redox potential vs product yield generated from oxidation of 1&#176; C-H sites. conducted in a high-pressure reactor. The rate of product formation increases over 5 h to a yield of 75%, after which the yield increases incrementally to 77% (Figure <ref type="figure">2A</ref>). All complexes show conversion of ethane to ethanol and acetaldehyde, as determined by a GC-FID assay; no acetic acid was detected. Control experiments with solutions of the Tp Ph ligand, Cu(ClO3)2 or solutions of Tp R CuClO3 in the absence of light or ethane show no reaction. Complex Cu-1, which has a similar steric environment compared to Cu-3, showed reduced ethane oxidation (16%, Figure <ref type="figure">2B</ref>), indicating that differences in the electronic properties of CH3 vs CF3 substituents lead to differences in reactivity. We postulate that a complex bearing electron withdrawing groups on the Tp R backbone (R = CF3 and Br, Cu-3 and Cu-4, respectively) engenders a weaker Cu-O bond and higher oxidizing power at the Cu center, thus increasing overall conversion yields. Complex Cu-2 exhibited similar photoredox activity (18%) as Cu-1, indicating that the steric bulk of ancillary phenyl rings on the ligand does not shield the copper center from ethane. Cu-4 furnished intermediate yields.</p><p>The ability to activate the strong C-H bond of ethane prompted us to examine other light alkanes with the 2&#176; and 3&#176; C-H bonds of propane and isobutane as targets. Because of the greater solubility of these gases in organic solvents, a pressure of 30 psi was used for these substrates and reaction times were decreased to 3 h. Figure <ref type="figure">3A</ref> shows the selectivity for oxidation of 1&#176; vs 2&#176; sites of propane for each complex. The more strongly oxidizing Cu-3 complex results in greater oxidation of 1&#176; C-H sites relative to 2&#176; C-H sites. The yield of oxidation at the 1&#176; site of substrate increases monotonically with an increase in the Cu(II) redox potential. A similar trend is observed for the oxidation of the 1&#176; vs 3&#176; C-H bonds of isobutane (Figure <ref type="figure">3B</ref>). The regioselectivity for activation of the 1&#176; C-H bond exhibits a marginal preference enhanced normalized for the number of C-H bonds, establishing that C-H activation is under thermodynamic vs kinetic control.</p><p>We performed further experiments using liquid alkanes (i) for comparison to results when the Cu II -O &#8226; intermediate is generated chemically, and (ii) to facilitate the accurate measurement of quantum yields and kinetic isotope effects. The photooxidation of hexane with 390-nm excitation results in the primary production of alkene and ketone, which results from the over-oxidation of the alcohol (Table <ref type="table">S6</ref>). A similar result is obtained for pentane (Table <ref type="table">S7</ref>). Optimized conditions are obtained when the alkane is in excess; a considerable decrease in yield is observed for stoichiometric amounts of substrate owing to photodegradation of the Cu complexes by reaction with solvent. We note that the product distributions for alkene and ketone are similar to that when the Cu II -O &#8226; intermediate is generated from the TpCu I acetonitrile adduct (Cu-8) using H2O2 as an oxidant. <ref type="bibr">32</ref> The similar product distributions between the photoredox and chemical systems are noteworthy, as the latter cannot derive reactivity from chlorine-based radicals, suggesting that the chemistry is not driven by &#8226; ClO2. Consistent with this contention, the disparate photoactivity amongst the Cu complexes alludes to Cu II -O &#8226; as the reactive intermediate as opposed to &#8226; ClO2, which would have no redox dependence on C-H activation. <ref type="bibr">56</ref> To further probe this issue, &#8226; Cl, <ref type="bibr">56</ref> &#8226; ClO2 57 and &#8226; ClO3 58 were photogenerated by established methods in the presence of hexane. The reaction yields and product distributions did not coincide with those of Cu-1 to Cu-4 (Table <ref type="table">S6</ref>). When the photoredox reaction was performed for Cu-3 in the presence of 1,4-cyclohexadiene and styrene, benzene was observed for the former substrate (Figure <ref type="figure">S12A</ref>) and no styrene oxide was detected for the latter substrate (Figure <ref type="figure">S12B</ref>). These results are consistent  with a mechanism that is radical-based as opposed to Oatom transfer. To rule out the involvement of a bimetallic intermediate as the active species, photochemical experiments of several Tp Me 2Cu2O1-2 complexes (Chart S1) in the presence of hexane were performed. No hexane oxidation products were detected, consistent with a monometallic Cu II -O &#8226; as the reactive intermediate.</p><p>The photooxidation quantum yields for the four Cu complexes range from 0.6-2.5% (Table <ref type="table">S8</ref>), with the most oxidizing Cu-3 complex exhibiting the highest quantum yield. The appreciable quantum yield prompted us to investigate whether the photoredox chemistry could be driven with solar light. Indeed, Cu-3 exhibited photooxidation yields of 34% for hexane oxidation when irradiated under 1-sun illumination vs 42% for irradiation with a 390 nm Kessil lamp (Table <ref type="table">S6</ref>).</p><p>A consistent with photooxidation of alkane is shown in Figure <ref type="figure">4</ref>. This mechanism is coincident with that proposed for the generation of the Cu II -O &#8226; by H2O2 oxidation of the TpCu I center. <ref type="bibr">32,</ref><ref type="bibr">59</ref> The photogenerated Cu II -O &#8226; undergoes hydrogen atom abstraction (HAA) from alkane (RH) to form Cu II -OH and R &#8226; . A kinetic isotope effect of 3.6 to 4.3, when the Cu complexes were irradiated in the presence of toluene and toluene-d8, establishes significant C-H cleavage in the transition state (Table <ref type="table">S8</ref>). A rebound mechanism transfers the OH group back to the alkyl radical to yield ROH and Tp R Cu. Alternatively, as has been proposed based on DFT calculations, <ref type="bibr">32</ref> the TpCu II (OH) center has sufficient radical character on oxygen to promote an ensuing HAA to furnish alkene.</p><p>The generation of Cu II -O &#8226; upon ClO2 photoelimination is supported by photocrystallography measurements of single crystals of Cu-4 irradiated with 405 nm light at 100 K. Comparison of the dark and photoinduced structures reveals that photolysis of the complex leads to elimination of ClO2 and formation of the Cu-O motif (Figure <ref type="figure">5</ref>). The resulting photolyzed structure (13.7% conversion) shows a terminal oxygen at d(Cu1-O2) = 2.32(6) &#197; that is bent and elongated, likely a result of crystal packing. Selected photocrystallography bond and angle metrics are listed in Table <ref type="table">S2</ref>. Production of the mono-oxo Cu photoproduct is also supported by matrix-assisted laser ionization (MALDI) measurements (Figure <ref type="figure">S6</ref>).</p><p>Of the light alkanes, methane is an important target substrate owing to a keen interest in its oxidation as well as presenting the most reticent 1&#176; C-H bond to activate (BDE = 105 kcal/mol). <ref type="bibr">60</ref> Photo-oxidation experiments of methane with the best-performing complex, Cu-3, were conducted under similar conditions as those used for the other light alkanes (Scheme 1). Irradiation of 10 mM Cu-3 under N2 in MeCN-d3 over 18 h in the presence of 200 psi CH4 at 25 &#176;C showed the formation of methanol in 6% yield as confirmed by <ref type="bibr">1</ref> H NMR spectroscopy (Figure <ref type="figure">S7</ref>) and GC-MS (Figure <ref type="figure">S8</ref>). To investigate whether the low yield was a result of over-oxidation (Figure <ref type="figure">S9</ref>), Cu-3 was irradiated with 390 nm light in the presence of methanol. After 18 h, 60% methanol was consumed (Figure <ref type="figure">S10</ref>) with the detection of CO and CO2 by gas chromatographic analysis of the reaction headspace (Figure <ref type="figure">S11</ref>) and no other C1 products (1% formic, 0% formaldehyde). Repeating this experiment with the less oxidizing Cu-2 complex showed only 1% methanol consumption, indicating less over-oxidation owing to the reduced oxidizing power of Cu-2 vs Cu-3.</p><p>The formation of a Cu-oxyl suggests that the methane oxidation yields could be increased by generating the Cu II -O &#8226; intermediate under aerobic conditions to initiate a radical chain pathway. <ref type="bibr">2,</ref><ref type="bibr">57</ref> Indeed, the photooxidation conversion yield of methane to methanol increased significantly under aerobic conditions in perfluorohexane (PFH). Irradiation of 2mM Cu-2 in O2-saturated PFH over 24 h in the presence of 200 psi CH4 showed the formation of 44% methanol. Increasing the photon flux by approximately &#215;2 resulted in 78% MeOH yield for Cu-2 vs 38% for Cu-3, confirming the increased selectivity of the former arising from reduced over-oxidation of MeOH. A control reaction with Cu-2 in the absence of CH4 showed no methanol production. The increased yield of MeOH is consistent with a radical chain mechanism initiated by H&#8226; abstraction of methane. <ref type="bibr">57</ref> With excess oxygen present, the Me&#8226; can react with O2 to generate MeOO&#8226;, which disproportionates to O2 and MeO&#8226;, which then reacts with another equivalent of CH4 to yield MeOH and Me&#8226;. The ability to generate MeOH from CH4 at room temperature using visible light highlights the benefits of photoredox methods to generate reactive intermediates that can activate recalcitrant C-H substrates.</p><p>The results reported herein establish the utility of photochemistry in achieving the oxidation of alkanes under mild conditions. A pseudo-tetrahedral ligand field around Cu allows alkanes to be photooxidized at room temperature using chlorate as the primary oxidant. A powerfully oxidizing Cu-oxyl intermediate may be generated upon ligand-to-metal charge transfer excitation with visible light, including 1-sun illumination. For the case of liquid alkanes, the results obtained by photoredox parallel those when the Cu-oxyl intermediate is generated chemically from H2O2. By tuning the oxidizing power of the copper-oxyl with the ancillary ligand field, the level of substrate oxidation may be controlled.</p></div></body>
		</text>
</TEI>
