skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Efficiency measurement of the flexible on‐body antenna at varying levels of stretch in a reverberation chamber
Flexible antennas have the potential to transform wearable and fabric‐based wireless sensing technologies. The antenna discussed in this study is part of a sensing system that uses the back‐scattered power level as the decision metric. For a good wireless sensor, it is necessary to offer a feasible read range and maintain good distinctions in the back‐scattered power levels between the different states (i.e. level of stretch) of the antenna. Moreover, effects due to human body proximity should be minimised. For these reasons, the radiation efficiency is a crucial parameter to investigate. This study presents the radiation efficiency measurement of the proposed flexible knitted ‘Bellyband’ antenna at two different levels of stretch in a reverberation chamber. This work validates the reverberation chamber measurements through comparison with simulations and anechoic chamber measurements at 900 MHz. Moreover, this work demonstrates how the approach can be used to quantify bellyband antenna efficiency in the vicinity of a human body. Finally, the efficiency results were used to predict the read range of Bellyband radio frequency identification technology.  more » « less
Award ID(s):
1816387
PAR ID:
10570859
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1049
Date Published:
Journal Name:
IET Microwaves, Antennas & Propagation
Volume:
14
Issue:
3
ISSN:
1751-8725
Format(s):
Medium: X Size: p. 154-158
Size(s):
p. 154-158
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Nano-Micro Letters)
    null (Ed.)
    Abstract As the key component of wireless data transmission and powering, stretchable antennas play an indispensable role in flexible/stretchable electronics. However, they often suffer from frequency detuning upon mechanical deformations; thus, their applications are limited to wireless sensing with wireless transmission capabilities remaining elusive. Here, a hierarchically structured stretchable microstrip antenna with meshed patterns arranged in an arched shape showcases tunable resonance frequency upon deformations with improved overall stretchability. The almost unchanged resonance frequency during deformations enables robust on-body wireless communication and RF energy harvesting, whereas the rapid changing resonance frequency with deformations allows for wireless sensing. The proposed stretchable microstrip antenna was demonstrated to communicate wirelessly with a transmitter (input power of − 3 dBm) efficiently (i.e., the receiving power higher than − 100 dBm over a distance of 100 m) on human bodies even upon 25% stretching. The flexibility in structural engineering combined with the coupled mechanical–electromagnetic simulations, provides a versatile engineering toolkit to design stretchable microstrip antennas and other potential wireless devices for stretchable electronics. 
    more » « less
  2. ; ; ; ; (, 2022 IEEE Custom Integrated Circuits Conference (CICC))
    There is a growing interest in wireless and batteryless implants for long-term sensing of organ movements, core pressure, glucose levels, or other biometrics [1]. Most research on such implants has focused on ultrasonic [2] and nearfield inductive [3-4] methods for power and communication, which require direct contact or close proximity (<1-5cm) to the human body. Recently, RF backscatter has emerged as a promising alternative due to its ability to communicate with far-field (> 10cm) wireless devices at ultra-low-power [5]. While multiple proposals have demonstrated far-field RF backscatter in deep tissues, these proposals have been limited to tag identification and could neither perform biometric sensing nor secure the wireless communication links, which is critical for ensuring the confidentiality of the sensed biometrics and for responding to commands only from authorized users [6]. Moreover, such far-field RF implants are susceptible to tissue variations which impact their resonance and hence their efficiency in RF backscatter and energy harvesting. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; (, Advanced Materials)
    Abstract Highly integrated, flexible, and ultrathin wireless communication components are in significant demand due to the explosive growth of portable and wearable electronic devices in the fifth‐generation (5G) network era, but only conventional metals meet the requirements for emerging radio‐frequency (RF) devices so far. Here, it is reported on Ti3C2TxMXene microstrip transmission lines with low‐energy attenuation and patch antennas with high‐power radiation at frequencies from 5.6 to 16.4 GHz. The radiation efficiency of a 5.5 µm thick MXene patch antenna manufactured by spray‐coating from aqueous solution reaches 99% at 16.4 GHz, which is about the same as that of a standard 35 µm thick copper patch antenna at about 15% of its thickness and 7% of the copper weight. MXene outperforms all other materials evaluated for patch antennas to date. Moreover, it is demonstrated that an MXene patch antenna array with integrated feeding circuits on a conformal surface has comparable performance with that of a copper antenna array at 28 GHz, which is a target frequency in practical 5G applications. The versatility of MXene antennas in wide frequency ranges coupled with the flexibility, scalability, and ease of solution processing makes MXene promising for integrated RF components in various flexible electronic devices. 
    more » « less
  4. ; (, IEEE BIOROB Conference)
    null (Ed.)
    Scalable, high-density electronic skins (e-skins) are a desirable goal of tactile sensing. However, a realization of this goal has been elusive due to the trade-off between spatial and temporal resolution that current tactile sensors suffer from. Additionally, as tactile sensing grids become large, wiring becomes unmanageable, and there is a need for a wireless approach. In this work, a scalable, event-based, passive tactilesensing system is proposed that is based on radio-frequency identification (RFID) technology. An RFID-based tactile sensing hand is developed with 19 pressure sensing taxels. The taxels are read wirelessly using a single ‘hand-shaped’ RFID antenna. Each RFID tag is transformed into a pressure sensor by disconnecting the RFID chip from its antenna and embedding the chip and antenna into soft elastomer with an air gap introduced between the RFID chip and its antenna. When a pressure event occurs, the RFID chip contacts its antenna and receives power and communicates with the RFID reader. Thus, the sensor is transformed into a biomimetic event-based sensor, whose response is activated only when used. Further, this work demonstrates the feasibility of constructing event-based, passive sensing grids that can be read wirelessly. Future tactile sensing e-skins can utilize this approach to become scalable and dense, while retaining high temporal resolution. Moreover, this approach can be applied beyond tactile sensing, for the development of scalable and high-density sensors of any modality. 
    more » « less
  5. ; ; ; ; (, Wireless Power Transfer)
    Near-field communication (NFC) readers, ubiquitously embedded in smartphones and other infrastructures can wirelessly deliver mW-level power to NFC tags. Our previous work NFC-wireless identification and sensing platform (WISP) proves that the generated NFC signal from an NFC enabled phone can power a tag (NFC-WISP) with display and sensing capabilities in addition to identification. However, accurately aligning and placing the NFC tag's antenna to ensure the high power delivery efficiency and communication performance is very challenging for the users. In addition, the performance of the NFC tag is not only range and alignment sensitive but also is a function of its run-time load impedance. This makes the execution of power-hungry tasks on an NFC tag (like the NFC-WISP) very challenging. Therefore, we explore a low-cost tag antenna design to achieve higher power delivered to the load (PDL) by utilizing two different antenna configurations (2-coil/3-coil). The two types of antenna configurations can be used to dynamically adapt to the requirements of varied range, alignment and load impedance in real-time, therefore, we achieve continuous high PDL and reliable communication. With the proposed method, we can, for example, turn a semi-passive NFC-WISP into a passive display tag in which an embedded 2.7″ E-ink screen can be updated robustly by a tapped NFC reader (e.g. an NFC-enable cell-phone) over a 3 seconds and within 1.5cm range. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email