An official website of the United States government
SUMMARY In previous publications, we presented a general framework, which we called ‘box tomography’, that allows the coupling of any two different numerical seismic wave propagation solvers, respectively outside and inside a target region, or ‘box’. The goal of such hybrid wavefield computations is to reduce the cost of computations in the context of full-waveform inversion for structure within the target region, when sources and/or receivers are located at large distances from the box. Previously, we had demonstrated this approach with sources and receivers outside the target region in a 2-D acoustic spherical earth model, and demonstrated and applied this methodology in the 3-D spherical elastic Earth in a continental scale inversion in which all stations were inside the target region. Here we extend the implementation of the approach to the case of a 3-D global elastic earth model in the case where both sources and stations are outside the box. We couple a global 3-D solver, SPECFEM3D_GLOBE, for the computation of the wavefield and Green’s functions in a reference 3-D model, with a regional 3-D solver, RegSEM, for the computation of the wavefield within the box, by means of time-reversal mirrors. We briefly review key theoretical aspects, showing in particular how only the displacement is needed to be stored at the boundary of the box. We provide details of the practical implementation, including the geometrical design of the mirrors, how we deal with different sizes of meshes in the two solvers, and how we address memory-saving through the use of B-spline compression of the recorded wavefield on the mirror. The proposed approach is numerically efficient but also versatile, since adapting it to other solvers is straightforward and does not require any changes in the solver codes themselves, as long as the displacement can be recovered at any point in time and space. We present benchmarks of the hybrid computations against direct computations of the wavefield between a source and an array of stations in a realistic geometry centred in the Yellowstone region, with and without a hypothetical plume within the ‘box’, and with a 1-D or a 3-D background model, down to a period of 20 s. The ultimate goal of this development is for applications in the context of imaging of remote target regions in the deep mantle, such as, for example, Ultra Low Velocity Zones.
more »
« less
Efficient hybrid numerical modeling of the seismic wavefield in the presence of solid-fluid boundaries
Abstract Applying full-waveform methods to image small-scale structures of geophysical interest buried within the Earth requires the computation of the seismic wavefield over large distances compared to the target wavelengths. This represents a considerable computational cost when using state-of-the-art numerical integration of the equations of motion in three-dimensional earth models. “Box Tomography” is a hybrid method that breaks up the wavefield computation into three parts, only one of which needs to be iterated for each model update, significantly saving computational time. To deploy this method in remote regions containing a fluid-solid boundary, one needs to construct artificial sources that confine the seismic wavefield within a small region that straddles this boundary. The difficulty arises from the need to combine the solid-fluid coupling with a hybrid numerical simulation in this region. Here, we report a reconciliation of different displacement potential expressions used for solving the acoustic wave equation and propose a unified framework for hybrid simulations. This represents a significant step towards applying ’Box Tomography’ in arbitrary regions inside the Earth, achieving a thousand-fold computational cost reduction compared to standard approaches without compromising accuracy. We also present examples of benchmarks of the hybrid simulations in the case of target regions at the ocean floor and the core-mantle boundary.
more »
« less
- Award ID(s):
- 2418419
- PAR ID:
- 10572262
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 16
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
SUMMARY Tsunami generation by offshore earthquakes is a problem of scientific interest and practical relevance, and one that requires numerical modelling for data interpretation and hazard assessment. Most numerical models utilize two-step methods with one-way coupling between separate earthquake and tsunami models, based on approximations that might limit the applicability and accuracy of the resulting solution. In particular, standard methods focus exclusively on tsunami wave modelling, neglecting larger amplitude ocean acoustic and seismic waves that are superimposed on tsunami waves in the source region. In this study, we compare four earthquake-tsunami modelling methods. We identify dimensionless parameters to quantitatively approximate dominant wave modes in the earthquake-tsunami source region, highlighting how the method assumptions affect the results and discuss which methods are appropriate for various applications such as interpretation of data from offshore instruments in the source region. Most methods couple a 3-D solid earth model, which provides the seismic wavefield or at least the static elastic displacements, with a 2-D depth-averaged shallow water tsunami model. Assuming the ocean is incompressible and tsunami propagation is negligible over the earthquake duration leads to the instantaneous source method, which equates the static earthquake seafloor uplift with the initial tsunami sea surface height. For longer duration earthquakes, it is appropriate to follow the time-dependent source method, which uses time-dependent earthquake seafloor velocity as a forcing term in the tsunami mass balance. Neither method captures ocean acoustic or seismic waves, motivating more advanced methods that capture the full wavefield. The superposition method of Saito et al. solves the 3-D elastic and acoustic equations to model the seismic wavefield and response of a compressible ocean without gravity. Then, changes in sea surface height from the zero-gravity solution are used as a forcing term in a separate tsunami simulation, typically run with a shallow water solver. A superposition of the earthquake and tsunami solutions provides an approximation to the complete wavefield. This method is algorithmically a two-step method. The complete wavefield is captured in the fully coupled method, which utilizes a coupled solid Earth and compressible ocean model with gravity. The fully coupled method, recently incorporated into the 3-D open-source code SeisSol, simultaneously solves earthquake rupture, seismic waves and ocean response (including gravity). We show that the superposition method emerges as an approximation to the fully coupled method subject to often well-justified assumptions. Furthermore, using the fully coupled method, we examine how the source spectrum and ocean depth influence the expression of oceanic Rayleigh waves. Understanding the range of validity of each method, as well as its computational expense, facilitates the selection of modelling methods for the accurate assessment of earthquake and tsunami hazards and the interpretation of data from offshore instruments.more » « less
-
Abstract Simulating present‐day solid Earth deformation and volatile cycling requires integrating diverse geophysical data sets and advanced numerical techniques to model complex multiphysics processes at high resolutions. Subduction zone modeling is particularly challenging due to the large geographic extent, localized deformation zones, and the strong feedbacks between reactive fluid transport and solid deformation. Here, we develop new workflows for simulating 3‐dimensional thermal‐mechanical subduction and patterns of volatile dehydration at convergent margins, adaptable to include reactive fluid transport. We apply these workflows to the Hikurangi margin, where recent geophysical investigations have offered unprecedented insight into the structure and processes coupling fluid transport and solid deformation across broad spatiotemporal scales. Geophysical data sets constraining the downgoing and overriding plate structure are collated with the Geodynamic World Builder, which provides the initial conditions for forward simulations using the open‐source geodynamic modeling software code ASPECT. We systematically examine how plate interface rheology and hydration of the downgoing plate and upper mantle influence Pacific–Australian convergence and seismic anisotropy. Models prescribing a plate boundary viscosity of Pa s best reproduce observed plate velocities, and changing the configuration of the Pacific–Australia plate boundary directly influences the modeled plate motions. Models considering hydrated olivine fabrics best reproduce observations of seismic anisotropy. Predicted patterns of slab dehydration and mantle melting correlate well with observations of seismic attenuation and arc volcanism. These results suggest that hydration‐related rheological heterogeneity and related fluid weakening may strongly influence slab dynamics. Future investigations integrating coupled fluid transport and global mantle flow will provide insight into the feedbacks between subduction dynamics, fluid pathways, and arc volcanism.more » « less
-
null (Ed.)Much like medical doctors who use X-rays or acoustic waves to make three-dimensional images of our insides, geophysicists use the elastic wavefield generated by earth- quakes worldwide to scan the deep interior of our planet for subtle contrasts in the propagation speeds of seismic waves. To image the deep Earth using seismic tomography, over the years, seismologists have densely covered the continents with seismometers to measure ground motion. As with medical tomography, where sources and detectors are rotated all around to illuminate our bodies from all angles, achieving similarly evenly distributed geographical coverage for seismology requires making measurements all over the Earth surface, including the two-thirds that are covered by oceans. Yet, although some ocean islands do host geophysical observatories, gathering data over marine areas continues to present unique challenges.more » « less
-
Abstract We have extended the distributional finite difference method (DFDM) to simulate the seismic‐wave propagation in 3D regional earth models. DFDM shares similarities to the discontinuous finite element method on a global scale and to the finite difference method locally. Instead of using linear staggered finite‐difference operators, we employ DFDM operators based on B‐splines and a definition of derivatives in the sense of distributions, to obtain accurate spatial derivatives. The weighted residuals method used in DFDM's locally weak formalism of spatial derivatives accurately and naturally accounts for the free surface, curvilinear meshing, and solid‐fluid coupling, for which it only requires setting the shear modulus and the continuity condition to zero. The computational efficiency of DFDM is comparable to the spectral element method (SEM) due to the more accurate mass matrix and a new band‐diagonal mass factorization. Numerical examples show that the superior accuracy of the band‐diagonal mass and stiffness matrices in DFDM enables fewer points per wavelength, approaching the spectral limit, and compensates for the increased computational burden due to four Lebedev staggered grids. Specifically, DFDM needs 2.5 points per wavelength, compared to the five points per wavelength required in SEM for 0.5% waveform error in a homogeneous model. Notably, while maintaining the same accuracy in the solid domain, DFDM demonstrates superior accuracy in the fluid domain compared to SEM. To validate its accuracy and flexibility, we present various 3D benchmarks involving homogeneous and heterogeneous regional elastic models and solid‐fluid coupling in both Cartesian and spherical settings.more » « less
