skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


This content will become publicly available on January 8, 2026

Title: Photonic Crystal Enhanced Microscopy on a 2D Photonic Crystal Surface
Abstract Digital‐resolution biosensing based on resonant reflection from photonic crystals (PC) has demonstrated significant potential for detection of proteomic and genomic biomarkers in serology, infectious disease diagnostics, and cancer diagnostics. An important intrinsic characteristic of resonant metamaterial surfaces is that enhanced electromagnetic fields are not uniformly distributed, resulting in spatially variable light‐matter interactions with nanoparticle tags that signal the presence of biomarker molecules. In this work, the spatial uniformity of resonantly enhanced, surface‐confined electromagnetic fields of a 1D PC is compared with a 2D PC with fourfold symmetry. When illuminated with unpolarized light, the simultaneously excited electromagnetic fields of transverse electric and transverse magnetic modes of the 2D PC present equally strong but complementary spatial distribution, leading to a >100% increased average near‐field intensity accompanied with a >50% compressed standard deviation compared to the 1D PC. Utilizing Photonic Resonator Absorption Microscopy (PRAM) to experimentally measure the absorption uniformity of ≈80 nm gold nanoparticles distributed upon the PC surface, a >100% improvement of the signal uniformity is observed when using the 2D PC. Overall, improvement in AuNP detection contrast, uniformity, and point spread function is demonstrated by PRAM performed upon a 2D PC surface.  more » « less
Award ID(s):
2232681
PAR ID:
10572467
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Advanced Materials Technologies
ISSN:
2365-709X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Assays utilizing fluorophores are common throughout life science research and diagnostics, although detection limits are generally limited by weak emission intensity, thus requiring many labeled target molecules to combine their output to achieve higher signal‐to‐noise. We describe how the synergistic coupling of plasmonic and photonic modes can significantly boost the emission from fluorophores. By optimally matching the resonant modes of a plasmonic fluor (PF) nanoparticle and a photonic crystal (PC) with the absorption and emission spectrum of the fluorescent dye, a 52‐fold improvement in signal intensity is observed, enabling individual PFs to be observed and digitally counted, where one PF tag represents one detected target molecule. The amplification can be attributed to the strong near‐field enhancement due to the cavity‐induced activation of the PF, PC band structure‐mediated improvement in collection efficiency, and increased rate of spontaneous emission. The applicability of the method by dose‐response characterization of a sandwich immunoassay for human interleukin‐6, a biomarker used to assist diagnosis of cancer, inflammation, sepsis, and autoimmune disease is demonstrated. A limit of detection of 10 fg mL−1and 100 fg mL−1in buffer and human plasma respectively, is achieved, representing a capability nearly three orders of magnitude lower than standard immunoassays. 
    more » « less
  2. Abstract Here, a wavelength‐specific photo‐thermoelectric (PTE) device is reported that achieves narrowband optical absorption and thermoelectric conversion functions using a stack of thin films on a grating‐patterned substrate. Conventional PTE devices are broadband with the absorption of electromagnetic radiation from ultraviolet to terahertz. There are demands for PTE devices that can exhibit narrowband response at a desired wavelength. Here, the narrowband PTE device consists of a photonic crystal (PC) filter with metal cladding and a thin‐film thermocouple. The PC‐PTE design is investigated numerically to illustrate the underlying energy conversion mechanism. The device is fabricated using nanoreplica molding followed by coating of thin films. The fabricated metal‐cladding PC resonator exhibits a narrowband optical absorption with a resonant absorption coefficient of 85.4% and full‐width‐half‐maximum of 14.8 nm in the visible wavelength range. The PTE measurements show that the thermoelectric output is sensitive to the coupling of incident light and guided‐mode resonance modes. Illuminated under the resonant condition, the PTE device exhibits a responsivity and noise equivalent power of 0.26 V W−1and 7.5 nW Hz−1/2, respectively. This PC‐PTE technology has the unique attributes of narrowband detection, large surface area, and low cost for the potential application in sensors, optical spectroscopy, and imaging. 
    more » « less
  3. Abstract While nanoscale quantum emitters are effective tags for measuring biomolecular interactions, their utilities for applications that demand single-unit observations are limited by the requirements for large numerical aperture (NA) objectives, fluorescence intermittency, and poor photon collection efficiency resulted from omnidirectional emission. Here, we report a nearly 3000-fold signal enhancement achieved through multiplicative effects of enhanced excitation, highly directional extraction, quantum efficiency improvement, and blinking suppression through a photonic crystal (PC) surface. The approach achieves single quantum dot (QD) sensitivity with high signal-to-noise ratio, even when using a low-NA lens and an inexpensive optical setup. The blinking suppression capability of the PC improves the QDs on-time from 15% to 85% ameliorating signal intermittency. We developed an assay for cancer-associated miRNA biomarkers with single-molecule resolution, single-base mutation selectivity, and 10-attomolar detection limit. Additionally, we observed differential surface motion trajectories of QDs when their surface attachment stringency is altered by changing a single base in a cancer-specific miRNA sequence. 
    more » « less
  4. Abstract Interferometric scattering microscopy is increasingly employed in biomedical research owing to its extraordinary capability of detecting nano-objects individually through their intrinsic elastic scattering. To significantly improve the signal-to-noise ratio without increasing illumination intensity, we developed photonic resonator interferometric scattering microscopy (PRISM) in which a dielectric photonic crystal (PC) resonator is utilized as the sample substrate. The scattered light is amplified by the PC through resonant near-field enhancement, which then interferes with the <1% transmitted light to create a large intensity contrast. Importantly, the scattered photons assume the wavevectors delineated by PC’s photonic band structure, resulting in the ability to utilize a non-immersion objective without significant loss at illumination density as low as 25 W cm−2. An analytical model of the scattering process is discussed, followed by demonstration of virus and protein detection. The results showcase the promise of nanophotonic surfaces in the development of resonance-enhanced interferometric microscopies. 
    more » « less
  5. Abstract Surface‐enhanced Raman scattering (SERS) sensing in microfluidic devices, namely optofluidic‐SERS, suffers an intrinsic tradeoff between mass transport and hot spot density, both of which are required for ultrasensitive detection. To overcome this compromise, photonic crystal‐enhanced plasmonic mesocapsules are synthesized, utilizing diatom biosilica decorated with in‐situ growth silver nanoparticles (Ag NPs). In the optofluidic‐SERS testing of this study, 100× higher enhancement factors and more than 1,000× better detection limit are achieved compared with traditional colloidal Ag NPs, the improvement of which is attributed to unique properties of the mesocapsules. First, the porous diatom biosilica frustules serve as carrier capsules for high density Ag NPs that form high density plasmonic hot‐spots. Second, the submicron‐pores embedded in the frustule walls not only create a large surface‐to‐volume ratio allowing for effective analyte capture, but also enhance the local optical field through the photonic crystal effect. Last, the mesocapsules provide effective mixing with analytes as they are flowing inside the microfluidic channel. The reported mesocapsules achieve single molecule detection of Rhodamine 6G in microfluidic devices and are further utilized to detect 1 × 10−9mof benzene and chlorobenzene compounds in tap water with near real‐time response, which successfully overcomes the constraint of traditional optofluidic sensing. 
    more » « less