An official website of the United States government
The development of devices that improve thermal energy management requires thermal regulation with efficiency comparable to the ratios R ∼ 105 in electric regu- lation. Unfortunately, current materials and devices in thermal regulators have only been reported to achieve R ∼ 10. We use atomistic simulations to demonstrate that Ferrocenyl (Fc) molecules under applied external electric fields can alter charge states and achieve high thermal switch ratios R = Gq/G0, where Gq and G0 are the high and low limiting conductances. When an electric field is applied, Fc molecules are positively charged and the SAM-Au interfacial interaction is strong, leading to high heat conductance Gq. On the other hand, with no electric field, the Fc molecules are charge neutral and the SAM-Au interfacial interaction is weak, leading to low heat conductance G0. We optimized various design parameters for the device performance, including the Au-to-Au gap distance L, the system operation temperature T, the net charge on Fc molecules q, the Au surface charge number Z, and the SAM number N. We find that Gq can be very large and increases with increasing q, Z, or N, while G0 is near 0 at L > 3.0 nm. As a result, R > 100 was achieved for selected parameter ranges reported here.
more »
« less
Autonomous Thermal Modulator Based on Gold Film‐Coated Liquid Crystal Elastsomer
Abstract Radiative cooling has been recently intensively explored for thermal management and enhancing energy efficiency. Yet, traditional materials with singular emissivity fall short in dynamic thermal management, highlighting the need for materials that can adjust their thermal radiation in real time. Active modulation methods, requiring external stimuli such as mechanical stretch, electric potential, or humidity change, offer adaptability but can increase energy use and complexity. Passive approaches, using materials' inherent thermal‐responsive properties, face manufacturing and scalability challenges. Here, a scalable yet effective passive approach is introduced for adaptive thermal modulation based on gold (Au) and liquid crystal elastomer (LCE) with a reversible response to environmental temperature changes. This modulator enables a “low thermal resistance” state through actuation‐induced microcracks that expose a high‐emissivity polymer substrate, and a “high thermal resistance” state by closing these microcracks and forming a high thermal resistance air gap between the modulator and the target object. The flexible design and fixed external dimensions of the Au‐LCE thermal modulator make it adaptable to various surface geometries. Furthermore, by adjusting the LCE's chemical composition, the modulator's transition temperature can be tailored, broadening its applications from enhancing building energy efficiency to improving clothing thermal comfort.
more »
« less
- Award ID(s):
- 2005181
- PAR ID:
- 10572571
- Publisher / Repository:
- Wiley
- Date Published:
- Journal Name:
- Advanced Materials Technologies
- Volume:
- 9
- Issue:
- 20
- ISSN:
- 2365-709X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Growing technical demand for thermal management stems from the pursuit of high–efficient energy utilization and the reuse of wasted thermal energy, which necessitates the manipulation of heat flow with electronic analogs to improve device performance. Here, recent experimental progress is reviewed for thermal switching materials, aiming to achieve all–solid–state thermal switches, which are an enabling technology for solid–state thermal circuits. Moreover, the current understanding for discovering thermal switching materials is reshaped from the aspect of heat conduction mechanisms under external controls. Furthermore, current challenges and future perspectives are provided to highlight new and emerging directions for materials discovery in this continuously evolving field.more » « less
-
Thermal management plays a key role in improving the energy efficiency and sustainability of future building envelopes. Here, we focus on the materials perspective and discuss the fundamental needs, current status, and future opportunities for thermal management of buildings. First, we identify the primary considerations and evaluation criteria for high-performance thermal materials. Second, state-of-the-art thermal materials are reviewed, ranging from conventional thermal insulating fiberglass, mineral wool, cellulose, and foams, to aerogels and mesoporous structures, as well as multifunctional thermal management materials. Further, recent progress on passive regulation and thermal energy storage systems are discussed, including sensible heat storage, phase change materials, and radiative cooling. Moreover, we discuss the emerging materials systems with tunable thermal and other physical properties that could potentially enable dynamic and interactive thermal management solutions for future buildings. Finally, we discuss the recent progress in theory and computational design from first-principles atomistic theory, molecular dynamics, to multiscale simulations and machine learning. We expect the rational design that combines data-driven computation and multiscale experiments could bridge the materials properties from microscopic to macroscopic scales and provide new opportunities in improving energy efficiency and enabling adaptive implementation per customized demand for future buildings.more » « less
-
Abstract Silicon microring modulator plays a critical role in energy-efficient optical interconnect and optical computing owing to its ultra-compact footprint and capability for on-chip wavelength-division multiplexing. However, existing silicon microring modulators usually require more than 2 V of driving voltage (Vpp), which is limited by both material properties and device structures. Here, we present a metal-oxide-semiconductor capacitor microring modulator through heterogeneous integration between silicon photonics and titanium-doped indium oxide, which is a high-mobility transparent conductive oxide (TCO) with a strong plasma dispersion effect. The device is co-fabricated by Intel’s photonics fab and our in-house TCO patterning processes, which exhibits a high modulation efficiency of 117 pm/V and consequently can be driven by a very low Vppof 0.8 V. At a 11 GHz modulation bandwidth where the modulator is limited by the RC bandwidth, we obtained 25 Gb/s clear eye diagrams with energy efficiency of 53 fJ/bit.more » « less
-
Pyroelectric materials that can generate electric charges when subjected to temperature changes are of interest for renewable energy. However, current flexible pyroelectric energy harvesters suffer from low output. Here, we present a nanocomposite of liquid crystalline elastomer (LCE) and pyroelectric lead zirconate titanate (PZT) nanoparticles and demonstrate a flexible heat harvesting device with high output. The overall pyroelectricity is enhanced by the secondary pyroelectricity generated from the thermal stress imposed on the LCE. Calculations and simulations corroborate with experiments, suggesting that the monodomain LCE/PZT with fixed boundaries offers the most enhancement. At a maximum heating rate of 0.20 kelvin per second, the fixed monodomain film (42.7 weight % PZT) shows an output current of 2.81 nanoamperes and a voltage of 6.23 volts, corresponding to a pyroelectric coefficientpof −4.01 nanocoulombs per square centimeter per kelvin, 49% higher than that of the widely used polyvinylidene fluoride. Our energy harvester can charge capacitors and power electronic devices such as light-emitting diodes.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1002/admt.202400512
