More Like this

1. Tyrrhenian Continent–Ocean Transition

   https://doi.org/10.14379/iodp.proc.402.2025  

   Zitellini, N; Malinverno, A; Estes, ER (April 2025, International Ocean Discovery Program)

   In the classical view of tectonic rifting, divergent lithospheric plates cause the asthenospheric mantle to ascend, decompress, and melt, eventually producing new magmatic crust. This view has been updated by drilling results that found exhumed mantle at the continent–ocean transition (COT), leading to the definition of magma-poor rifted margins. Obtaining geologic samples from COTs to directly constrain the diversity of rifting processes is a challenge because the igneous crust and mantle rocks are typically buried under a thick sediment cover. The Tyrrhenian Sea provides an optimal location to test COT formation models by drilling because it has a comparatively thin sediment cover, allows for studying a conjugate pair of COT margins in a single drilling expedition, and has been mapped in unprecedented detail with recent geophysical measurements. The key objective of International Ocean Discovery Program Expedition 402 was to determine the nature of the geologic basement in the central Vavilov Basin, where exhumed mantle peridotites were expected, and in the conjugate margins to the west (Cornaglia Terrace) and east (Campania Terrace). In the Vavilov Basin, Sites U1614 and U1616 recovered an exceptional variety of mantle rocks, including lherzolites, harzburgites, plagioclase-bearing lherzolites and harzburgites, dunites, and minor amounts of pyroxenites and magmatic intrusions. The mantle peridotites are significantly hydrated and weathered, resulting in the formation of serpentine and carbonate veins. In contrast, Site U1612 recovered at the sediment/basement interface an unconsolidated breccia with clasts of basalt, peridotite, and granite, followed by variably deformed mylonitic gneisses that transition downhole to granitoid quartz-diorite rocks. On the western Tyrrhenian margin (Cornaglia Terrace), Site U1613 sampled a sediment sequence dating back to the Messinian (Late Miocene), resting on much older sedimentary rocks akin to the Triassic–Paleozoic successions outcropping in Sardinia, supporting the hypothesis that the margin consists of extended continental crust. On the conjugate margin to the east (Campania Terrace), Site U1617 did not reach the basement but recovered a complete sequence of Messinian evaporites, including halite. The samples and data collected during Expedition 402 provide an extensive new data set to determine the heterogeneity of the mantle, the nature and history of melt production and impregnation, and the extent and evolution of mantle serpentinization and carbonation; to constrain the geometry and timing of the deformation that led to mantle exhumation; to study the fluid-rock interactions between seawater, sediment, and mantle peridotites; and to constrain geodynamic models of rifting and COT formation. 

   more » « less
2. Expedition 402 Scientific Prospectus: Tyrrhenian Continent–Ocean Transition

   https://doi.org/10.14379/iodp.sp.402.2023  

   Zitellini, N.; Malinverno, A.; Estes, E.R. (March 2023, Scientific prospectus)

   A tenet of plate tectonics is that divergent plates cause the asthenospheric mantle to ascend, decompress, and melt, producing new magmatic crust. However, drilling west of Iberia in the 1980s discovered a continent–ocean transition (COT) made of exposed mantle, revising models of lithospheric thinning and melt generation and defining magma-poor margins. A long-standing argument about mantle in COTs concerns its nature as either subcontinental or being exhumed during ultraslow seafloor spreading. Additionally, two models attribute the apparent lack of melts either to slow extension resulting in low ascent rates with enhanced asthenospheric cooling and reduced melt production or to upwelling mantle originally too depleted to produce a significant melt fraction. The debate on COT models is limited by the scarce evidence obtained in ultra-deepwater drilling, restricted to a few basement highs. Thus, 30 y after its discovery, the nature and genesis of COTs is still controversial. The comparatively shallow water depth and thin sediment cover of the Tyrrhenian Sea provide an optimal location to test COT formation models by drilling. The Tyrrhenian is the only example where extensive modern geophysical data has accurately mapped basement domains of a conjugate pair of COTs. They can be characterized with unprecedented detail in a single drilling expedition to study the time and space evolution of COT processes. Expedition 402 will drill two perpendicular transects. An east–west transect will target the progression from magmatic crust to exhumed mantle; a north–south transect will map the fault zone that exhumed the mantle. Drilling will sample the complete sediment section including Messinian deposits, the sediment/basement interface, the mantle, the associated magmas, and the products of syntectonic, and possibly ongoing, fluid-rock interactions to evaluate the hydrosphere–lithosphere geochemical exchange and potential related ecosystems. 

   more » « less
3. Expedition 367/368 Scientific Prospectus: South China Sea Rifted Margin

   https://doi.org/10.14379/iodp.sp.367368.2016  

   Sun, Z.; Stock, J.; Jian, Z.; McIntosh, K.; Alvarez-Zarikian, C.A.; Klaus, A. (April 2016, Scientific prospectus)

   null (Ed.)

   International Ocean Discovery Program (IODP) Expeditions 367 and 368 will address the mechanisms of lithosphere extension during continental breakup. State of the art deep reflection seismic data show that the northern South China Sea (SCS) margin offers excellent drilling opportunities that can address the process of plate rupture at a magma-poor rifted margin. The SCS margin shows similarities to the hyperextended Iberia-Newfoundland margins, possibly including exhumed and serpentinized mantle within the continent-ocean transition (COT). However, recent modeling studies suggest that mechanisms of plate weakening other than serpentinization of the subcontinental lithospheric mantle exist. Two competing models for plate rupture (in the absence of excessively hot asthenospheric mantle) have widely different predictions for (1) the crustal structure across the COT, (2) the time lag between breakup and formation of igneous ocean crust, (3) the rates of extension, and (4) the subsidence and thermal history. Proposed drilling will core through thick sedimentary sections and into the underlying basement to firmly discriminate between these models. We plan to occupy four sites across a 150-200 km wide zone of highly extended seaward-thinning crust with a well-imaged COT zone. Three sites will determine the nature of critical crustal entities within the COT and constrain postbreakup crustal subsidence. These three sites will also help constrain how soon after breakup igneous crust started to form. A fourth site on the continental margin landward of the COT will constrain the timing of rifting, rate of extension, and crustal subsidence. If serpentinized mantle is found within the COT, this will lend support to the notion that the Iberia-type margin is not unique, and hence that weakening of the lithosphere by introducing water into the mantle may be a common process during continental breakup. If serpentinite is not found, and alternatively, scientific drilling results for the first time are gained in support of an alternative model, this would be an equally important accomplishment. Constraints on SCS formation and stratigraphy, including industry drilling, Ocean Drilling Program Leg 184 and IODP Expedition 349 drilling, the young (Paleogene) rifting of the margin, and absence of excessively thick postrift sediment allow us to effectively address these key topics by drilling within a well-constrained setting. An initial spreading rate of ~2 cm/y half-rate reduces the potential complexity of magma-starved, slow-spreading crust forming after breakup. Drilling, coring, and logging to address these SCS rifted margin science objectives will be undertaken during Expeditions 367 and 368, which will be implemented as a single science program. 

   more » « less
4. Expedition 367 Preliminary Report: South China Sea Rifted Margin

   https://doi.org/10.14379/iodp.pr.367.2018  

   Sun, Z.; Stock, J.; Klaus, A. (August 2018, Preliminary report)

   null (Ed.)

   International Ocean Discovery Program Expedition 367 is the first of two consecutive cruises that form the South China Sea Rifted Margin program. Expeditions 367 and 368 share the common key objectives of testing scientific hypotheses of breakup of the northern South China Sea (SCS) margin and comparing its rifting style and history to other nonvolcanic or magma-poor rifted margins. Four primary sites were selected for the overall program: one in the outer margin high (OMH) and three seaward of the OMH on distinct, margin-parallel basement ridges. These ridges are informally labeled A, B, and C within the continent–ocean transition (COT) zone going from the OMH to the steady-state oceanic crust of the SCS. The main scientific objectives include 1. Determining the nature of the basement within critical crustal units across the COT of the SCS that are critical to constrain style of rifting, 2. Constraining the time interval from initial crustal extension and plate rupture to the initial generation of igneous ocean crust, 3. Constraining vertical crustal movements during breakup, and 4. Examining the nature of igneous activity from rifting to seafloor spreading. In addition, sediment cores from the drill sites will provide information on the Cenozoic regional tectonic and environmental development of the Southeast Asia margin. Expedition 367 successfully completed operations at two of the four primary sites (Site U1499 on Ridge A and Site U1500 on Ridge B). At Site U1499, we cored to 1081.8 m in 22.1 days, with 52% recovery, and then logged downhole data from 655 to 1020 m. In 31 days at Site U1500, we penetrated to 1529 m, cored a total of 1012.8 m with 37% recovery, and collected log data from 842 to 1133 m. At each site we drilled to reach the depth of the main seismic reflector (acoustic basement), which prior to the expedition had been interpreted to be crystalline basement. Our objective was to determine which lithospheric layer constitutes the basement of the COT and whether there was middle or lower continental crust or subcontinental lithospheric mantle exhumed in the COT before the final lithospheric breakup. At Site U1499, coring ~200 m into the acoustic basement sampled sedimentary rocks, including early Miocene chalks underlain by pre-Miocene polymict breccias and poorly cemented gravels composed of sandstone pebbles and cobbles. Preliminary structural and lithologic analysis suggested that the gravels might be early synrift to prerift sediment. At Site U1500, the main seismic reflector corresponds to the top of a basalt sequence at ~1379.1 m. We cored 149.90 m into this volcanic package, recovering 114.92 m (77%) of sparsely to moderately plagioclase-phyric basalt comprising numerous lava flows including pillow lavas with glass, chilled margins, altered veins, hyaloclastites, and minor sediment. Preliminary geochemical analyses show that the basalt is tholeiitic. We speculate that the basalt might belong to the very early stage of magmatism prior to steady-state seafloor spreading (known as an “embryonic ocean” regime). Sampling of the Pleistocene to lower Miocene sedimentary section at Sites U1499 and U1500 was not continuous for two reasons. First, there was extremely poor recovery within substantial intervals interpreted to be poorly lithified sands. Second, we chose to drill down without coring in some sections at Site U1500 to ensure sufficient time to achieve this site’s high-priority deep objectives. Nevertheless, the upper Miocene basin sequence, consisting of interbedded claystone, siltstone, and sandstone, is continuous on seismic reflection profiles, and can be correlated between the two sites using both seismic reflectors and biostratigraphy. Together with results from other holes previously drilled in the SCS, these samples will help to constrain changes in paleoceanographic conditions during the Miocene in this part of the SCS basin. 

   more » « less
5. Expedition 368X Preliminary Report: South China Sea Rifted Margin

   https://doi.org/10.14379/iodp.pr.368X.2019  

   Childress, L. (January 2017, Preliminary report)

   null (Ed.)

   International Ocean Discovery Program (IODP) Expedition 368X is the third of three cruises that form the South China Sea Rifted Margin program. Expeditions 367, 368, and 368X share the common key objectives of testing scientific hypotheses of breakup of the northern South China Sea (SCS) margin and comparing its rifting style and history to other nonvolcanic or magma-poor rifted margins. Four primary sites were selected for the overall program: one in the outer margin high (OMH) and three seaward of the OMH on distinct, margin-parallel basement ridges informally labeled Ridges A, B, and C from north to south. The ridges are located in the continent–ocean transition (COT) zone ranging from the OMH to the interpreted steady-state oceanic crust (Ridge C) of the SCS. The main scientific objectives include 1. Determining the nature of the basement in crustal units across the COT of the SCS that are critical to constrain style of rifting, 2. Constraining the time interval from initial crustal extension and plate rupture to the initial generation of igneous ocean crust, 3. Constraining vertical crustal movements during breakup, and 4. Examining the nature of igneous activity from rifting to seafloor spreading. In addition, sediment cores from the drill sites targeting primarily tectonic and basement objectives will provide information on the Cenozoic regional environmental development of the Southeast Asia margin. Expedition 368X was planned to reoccupy a site started during Expedition 368. Because of repeated breakdowns of the low clutch diaphragm in the drawworks, Hole U1503A was abandoned after installing casing to 991.5 m. Despite this setback to Expedition 368 and the South China Sea Rifted Margin program, Hole U1503A was completed during Expedition 368X. The overarching scientific goal of IODP Expeditions 367 and 368 was to unveil the mechanisms of continental breakup at the northern SCS margin from rifting through steady-state spreading. A key operational objective of Site U1503 was to sample the lowermost ~300 m of sediments on top of basement to constrain the age and subsidence history of the crust at this location, the timing of normal faulting, and the environment of the early half-graben fill. A second important goal was to sample at least 100 m of the igneous basement. Deep representative sampling of the igneous material at this site will provide an important reference frame for the modeling of breakup and early ocean spreading. In Hole U1503A, the sediment sequence was cored with the rotary core barrel (RCB) system from 995.1 to 1597.84 m (602.74 m penetration; 128.01 m recovered; 21%) and then the underlying basement was continuously cored from 1597.84 to 1710.1 m (112.26 m penetration; 47.91 m recovered; 43%). Although logging deeper than 991.5 m (bottom of casing) was not possible because of unstable hole conditions, Hole U1503A was logged with the Vertical Seismic Imager in the cased portion of the hole. No days were lost to waiting on weather, and the only mechanical downtime was a 1.5 h period when an electrical malfunction caused the top drive to shut down for repairs. Expedition 368X successfully completed the operational objectives in Hole U1503A that were abandoned during Expedition 368. In the SCS margin science program, material recovered during Expedition 368X will contribute toward meeting the four specific objectives of Expeditions 367 and 368. Postexpedition research on the sediments and basalt recovered from Hole U1503A will allow for determination of emplacement age and geochemical analyses of rock composition and assessment of melting processes and age of crystallization. The combination of such analyses will contribute to geochemical or thermomechanical modeling that will constrain mantle origin and melting processes leading to the formation of these basalts. 

   more » « less