An official website of the United States government
Abstract Thermoset materials have begun to be applied in additive composite manufacturing due to their ability to withstand high temperatures without losing structural integrity. Meanwhile, the characterization of mechanical properties for additively manufactured composites is critical for ensuring material reliability and safety. However, traditional testing methods struggle to accurately and nondestructively characterize additively manufactured composites due to challenges posed by curing processes, microstructural variability, anisotropic properties of thermoset composites, and the risk of damaging these materials during evaluation. For characterizing the mechanical properties of additive-manufactured thermoset composites, this paper presents a novel method that combines a nondestructive PZT-LDV guided wave sensing system and a wavenumber analysis that fuses multidimensional Fourier transform with dispersion curve regression. For proof of concept, we performed an experiment using our method to measure a 3D-printed thermoset composite panel. Based on our nondestructive approach, two material properties (shear wave velocity and Poisson’s ratio) in multiple directions were successfully determined for the tested panel. We expect this research to introduce a non-contact and efficient method for characterizing various composites and monitoring their property changes after additive manufacturing.
more »
« less
This content will become publicly available on November 17, 2025
Wavefield Analysis Enabled Multi-Directional Mechanical Properties Characterization for 3D Printed Composites
Abstract Thermoset composites, utilized in additive manufacturing, are distinguished by their excellent thermal and mechanical properties, enabling them to maintain structural integrity even under high-temperature conditions. An accurate method for characterizing the mechanical properties is necessary to ensure the performance parameters, reliability, and safety of materials during and post-manufacturing. However, characterizing 3D-printed thermoset composites is challenging due to the anisotropy introduced by the additive manufacturing process and factors such as delamination and porosity. This also leads to difficulties in accurately characterizing composites with traditional testing methods. To address this, this paper introduces a novel method that combines a non-destructive Piezoelectric transducer-laser Doppler Vibrometer (PZT-LDV) guided wave sensing system with an optimization algorithm-enhanced wavenumber analysis technique. A series of experiments were conducted to validate the concept of measuring the mechanical properties of a 3D-printed thermoset material panel. Our method successfully determined two material properties — shear wave speed and Poisson’s ratio in multiple directions on the test panel. This study aims to establish a precise and rapid non-destructive testing method that can effectively characterize various composite materials and monitor their performance throughout the additive manufacturing process.
more »
« less
- Award ID(s):
- 2243771
- PAR ID:
- 10572695
- Publisher / Repository:
- American Society of Mechanical Engineers
- Date Published:
- ISBN:
- 978-0-7918-8859-9
- Format(s):
- Medium: X
- Location:
- Portland, Oregon, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The advancement of additive manufacturing has significantly transformed the production process of metal components. However, the unique challenges associated with layer-by-layer manufacturing result in anisotropy in the microstructure and uneven mechanical properties of additive-manufactured metal products. Traditional testing methods often fall short of providing the precise mechanical performance evaluations required to meet industry standards. This paper introduces an innovative approach that combines a nondestructive Lamb wave sensing system with a wavenumber analysis method to characterize the mechanical properties of 3D-printed metal panels in multiple directions. Our method employs piezoelectric actuators (PZT) to generate Lamb waves and utilizes a laser Doppler vibrometer (LDV) for non-contact, two-dimensional grid acquisition of the wavefield. The anisotropic properties of the metal 3D-printed structure will be captured in the wavefield, offering an informative dataset for wavenumber analysis. The proposed analytical method includes multi-directional frequency wavenumber analysis and a least-squares-based dispersion curves regression. The integration of the above advanced analytical tools allows for the accurate characterization of the shear wave velocity and Poisson’s ratio of the plate structure. This precise characterization is crucial for ensuring the structural integrity and consistent mechanical properties of 3D-printed metal components. We validated our method using a 3D-printed stainless-steel plate, demonstrating its capability to effectively characterize the multi-directional mechanical properties of additively manufactured metal plates. We expect that our method can provide a nondestructive, time-efficient, and comprehensive quality control solution for additive manufacturing across various industries.more » « less
-
Understanding the mechanical properties of three-dimensional (3D)-printed ceramics while keeping the parts intact is crucial for advancing their application in high-performance and biocompatible fields, such as biomedical and aerospace engineering. This study uses non-destructive nanoindentation techniques to investigate the mechanical performance of 3D-printed zirconia across pre-conditioned and sintered states. Vat photopolymerization-based additive manufacturing (AM) was employed to fabricate zirconia samples. The structural and mechanical properties of the printed zirconia samples were explored, focusing on hardness and elastic modulus variations influenced by printing orientation and post-processing conditions. Nanoindentation data, analyzed using the Oliver and Pharr method, provided insights into the elastic and plastic responses of the material, showing the highest hardness and elastic modulus in the 0° print orientation. The microstructural analysis, conducted via scanning electron microscopy (SEM), illustrated notable changes in grain size and porosity, emphasizing the influencing of the printing orientation and thermal treatment on material properties. This research uniquely investigates zirconia’s mechanical evolution at the nanoscale across different processing stages—pre-conditioned and sintered—using nanoindentation. Unlike prior studies, which have focused on bulk mechanical properties post-sintering, this work elucidates how nano-mechanical behavior develops throughout additive manufacturing, bridging critical knowledge gaps in material performance optimization.more » « less
-
Abstract Composites play progressively significant roles across a spectrum of applications involving high‐performance materials and products within industries such as aerospace, naval, automotive, construction, missiles, and defense technology. Notably, oriented fiber composites have garnered substantial attention due to their advantageous attributes like a high strength‐to‐weight ratio and controlled anisotropy. Nonetheless, challenges persist in uneven fiber alignment, fiber clustering within the matrix material, and constraints on fiber volume, impeding the mass production of oriented fiber‐reinforced composites. In this study, we present a novel approach to 3D printing of uniformly aligned short fiber reinforcement in a composite of heavily loaded carbon and nylon. Capitalizing on the additive manufacturing potential of rapidity and precision, the extrusion process induces carbon fiber (CF) alignments in filaments via shear forces. The 3D‐printed structures that were created displayed impressive potential for customization. They consistently demonstrated improved mechanical and thermal properties when compared to the original nylon structures. Our methodology for producing uniformly dispersed and aligned short fiber reinforcement in polymer composites promises to propel the advancement of design and manufacturing for high‐performance composite materials and components.more » « less
-
Abstract Additive manufacturing, an innovative process that assembles materials layer by layer from 3D model data, is recognized as a transformative technology across diverse industries. Researchers have extensively investigated the impact of various printing parameters of 3D printing machines, such as printing speed, nozzle temperature, and infill, on the mechanical properties of printed objects. Specifically, this study focuses on applying Finite Element Analysis (FEA) in G code modification in Fused Deposition Modeling (FDM) 3D Printing. FDM involves extruding a thermoplastic filament in layers over a build plate to create a three-dimensional object. In the realm of load-bearing structures, the Finite Element Analysis (FEA) process is initiated on the target object, employing the primary load to identify areas with high-stress concentrations. Subsequently, optimization techniques are used to strategically assign printing parameter combinations to improve mechanical properties in potentially vulnerable regions. The ultimate objective is to tailor the G code, a set of instructions for the printer, to strengthen particular areas and improve the printed object’s overall structural integrity. To evaluate the suggested methodology’s efficacy, the study conducts a comprehensive analysis of printed objects, both with and without the optimized G code. Simultaneously, mechanical testing, such as tensile testing, demonstrates quantitative data on structural performance. This comprehensive analysis aims to identify the impact of G code alteration on the finished product. Preliminary experimental results using simple tensile specimens indicate notable improvements in structural performance. Importantly, these improvements are achieved without any discernible mass increase, optimizing material usage and reducing the cost of additive manufacturing. The modified G code targets to strengthen critical areas using updated printing parameters without a net increase in the overall material consumption of the object. This finding holds significant implications for industries reliant on additive manufacturing for load-bearing components, offering a promising avenue for improved efficiency and durability. Integrating advanced techniques, such as G code modification and finite element analysis (FEA), as the additive manufacturing landscape evolves presents a pathway toward optimizing mechanical properties. By contributing valuable insights and laying the groundwork for further exploration and refinement of these methodologies, this study paves the way for enhanced structural performance in various additive manufacturing applications. Ultimately, it encourages innovation and progress in the field, propelling the industry toward new heights of efficiency and reliability.more » « less
