An official website of the United States government
ABSTRACT Technologies for large‐scale manufacturing of viral vectors for gene therapies, such as tangential flow filtration and membrane chromatography, are under development. In these early stages of process development, techno‐economic analyses are useful for identifying membrane properties yielding the greatest impact on process performance. In this study, we adapted a techno‐economic framework used for monoclonal antibody capture for adeno‐associated viral vector purification. We added mechanistic models to simulate flux decline during harvesting and separating full and empty capsids during polishing. Graphical user interfaces were added to help users explore the design search space. We selected a base process and manipulated selected variables to see their impact on large‐scale manufacturing performance. These sensitivity analyses revealed that, under the selected process conditions, increasing module capacity reduces cost of goods more effectively than increasing operational flux in tangential flow membrane filtration modules for virus harvesting. Membrane chromatography columns with relatively low dynamic binding capacity (DBC) and short residence time (RT) offered similar or better economic performance than those with high DBC and long RT. Additionally, the difference in equilibrium solid‐phase concentration between full and empty capsids as a function of salt concentration significantly affects purity.
more »
« less
Enhancing Virus Filter Performance Through Pretreatment by Membrane Adsorbers
Virus filtration is used to ensure the high level of virus clearance required in the manufacture of biopharmaceutical products such as monoclonal antibodies. Flux decline during virus filtration can occur due to the formation of reversible aggregates consisting of self-assembled monomeric monoclonal antibody molecules, particularly at high antibody concentrations. While size exclusion chromatography is generally unable to detect these reversible aggregates, dynamic light scattering may be used to determine their presence. Flux decline during virus filtration may be minimized by pretreating the feed using a membrane adsorber in order to disrupt the reversible aggregates that are present. The formation of reversible aggregates is highly dependent on the monoclonal antibody and the feed conditions. For the pH values investigated here, pretreatment of the feed using a hydrophobic interaction membrane adsorber was the most effective in minimizing flux decline during virus filtration. Ion exchange membranes may also be effective if the monoclonal antibody and membrane are oppositely charged. Consequently, the effectiveness of ion exchange membrane adsorbers is much more dependent on solution pH when compared to hydrophobic interaction membrane adsorbers. Size based prefiltration was found to be ineffective at disrupting these reversible aggregates. These results can help guide the development of more effective virus filtration processes for monoclonal antibody production.
more »
« less
- PAR ID:
- 10573592
- Publisher / Repository:
- MPDI
- Date Published:
- Journal Name:
- Membranes
- Volume:
- 15
- Issue:
- 1
- ISSN:
- 2077-0375
- Page Range / eLocation ID:
- 34
- Subject(s) / Keyword(s):
- aggregation flux decline fouling membrane adsorber monoclonal antibody pH prefiltration reversible aggregate virus filtration
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
ABSTRACT Single Pass Tangential Flow Filtration (SPTFF) is increasingly used for inline concentration and final formulation in intensified/continuous processes for monoclonal antibody products. However, these modules typically operate at low feed flux, requiring significant membrane area and often complex internal staging to achieve the desired concentration factor. In this study, a vibration‐assisted SPTFF system was used for inline concentration of soluble protein. The maximum sustainable flux and concentration factor were evaluated under vibratory and non‐vibratory conditions using flux‐stepping experiments. SPTFF performed under vibration was able to achieve single pass concentration factors of 20× at a feed flux of 17.2 L/m2/h, while the non‐vibratory system showed rapid fouling at much lower concentration factors. Furthermore, the vibratory module achieved a 6‐fold higher concentration factor compared to a screened channel cassette. Long‐term filtration experiments demonstrated that the vibratory system could concentrate a 20 g/L protein solution to 100 g/L using a single cassette with stable operation for more than 8 h without protein aggregation. This work highlights the potential opportunity to develop vibratory SPTFF systems for intensified bioprocessing.more » « less
-
Abstract Tangential flow filtration (TFF) has many advantages for bioreactor harvesting, as the permeate could be introduced directly to the subsequent capture step. However, membrane fouling has limited its widespread use. This is particularly problematic given the high cell densities encountered today. Here, a reverse asymmetric membrane, where the more open surface faces the feed stream and the tighter barrier layer faces the permeate stream, has been investigated. The open surface contains pores up to 40 μm in diameter while the tighter barrier layer has an average pore size of 0.4 μm. Filtration of yeast suspensions has been conducted under a range of conditions. The yeast cells are trapped in the open pore structure. The membrane stabilizes an internal porous cake that acts like a depth filter. This stabilized cake layer can remove particulate matter that would foul the barrier layer if it faced the feed stream. As filtration continues, a surface cake layer forms on the membrane surface. A resistance in series model has been developed to describe the permeate flux during TFF. The model contains three fitted parameters which can easily be determined from constant pressure normal flow filtration experiments and total recycle constant flux TFF experiments. The model can be used to estimate the capacity of the filter for a given feed stream. Our results suggest that using a reverse asymmetric membrane could avoid severe flux decline associated with fouling of the barrier layer during bioreactor harvesting.more » « less
-
To unravel fouling and defouling mechanisms of protein, saccharides and natural organic matters (NOM) on polymeric membrane during filtration, this study investigated filtration characteristics on polyvinyl chloride (PVC) ultrafiltration membranes with bovine serum albumin, dextran, humic acid as model foulants. Membrane fouling and defouling performances were analyzed through monitoring the flux decline during filtration and flux recovery during physical backwash. Physico-chemical properties (e.g., hydrophobicity and surface charge) of PVC membrane and foulants were characterized, which were used in the extended Derjaguin–Landau–Verwey–Overbeek (EDLVO) theory to calculate the interaction energies between membrane foulant and foulant-foulant. The results showed that at the later filtration stages the fouling rate was strongly correlated with the deposition rate, which was determined by the interaction energy profile calculated by EDLVO. Moreover, the adhesion forces of membrane–foulant and foulant–foulant were further measured by atomic force microscopy (AFM) with modified colloidal probes. A positive correlation (R2 =0.845) between particle detachment rate (determined by adhesion force) and defouling rate was developed for BSA and HA foulants that led to cake layer formation. By contrast, dextran defouling rate was off this correlation as dextran partially clogged membrane pores due to its smaller size.more » « less
-
Abstract Tangential flow filtration is advantageous for bioreactor clarification as the permeate stream could be introduced directly to the subsequent product capture step. However, membrane fouling coupled with high product rejection has limited its use. Here, the performance of a reverse asymmetric hollow fiber membrane where the more open pore structure faces the feed stream and the barrier layer faces the permeate stream has been investigated. The open surface contains pores up to 40 μm in diameter while the tighter barrier layer has an average pore size of 0.4 μm. Filtration of Chinese hamster ovary cell feed streams has been investigated under conditions that could be expected in fed batch operations. The performance of the reverse asymmetric membrane is compared to that of symmetric hollow fiber membranes with nominal pore sizes of 0.2 and 0.65 μm. Laser scanning confocal microscopy was used to observe the locations of particle entrapment. The throughput of the reverse asymmetric membrane is significantly greater than the symmetric membranes. The membrane stabilizes an internal high permeability cake that acts like a depth filter. This stabilized cake can remove particulate matter that would foul the barrier layer if it faced the feed stream. An empirical model has been developed to describe the variation of flux and transmembrane pressure drop during filtration using reverse asymmetric membranes. Our results suggest that using a reverse asymmetric membrane could avoid severe flux decline associated with fouling of the barrier layer during bioreactor clarification.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/membranes15010034
