An official website of the United States government
Abstract The structure of the mantle transition zone (MTZ) in subduction zones is essential for understanding subduction dynamics in the deep mantle and its surface responses. We constructed the P (Vp) and SH velocity (Vs) structure images of the MTZ beneath Northeast Asia based on two‐dimensional (2‐D) triplicated waveform modeling. In the upper MTZ, a normalVpbut 2.5% lowVslayer compared with IASP91 are required by the triplication data. In the lower MTZ, our results show a relatively higher‐velocity layer (+2%Vpand −0.5%Vscompared to IASP91) with a thickness of ~140 km and length of ~1,200 km atop the 660‐km discontinuity. Taking this anomaly as the stagnant slab and considering the plate convergence rate of 7–10 cm/year in the western Pacific region during the late Cenozoic, we deduced that the stagnant slab has a subduction age of less than 30 Ma. This suggests that the observed stagnancy of the slab in the MTZ beneath Northeast Asia may have occurred no earlier than the Early Oligocene. From the constraints derived individually onVpandVsstructures, highVp/Vsratios are obtained for the entire MTZ beneath Northeast Asia, which may imply a water‐rich and/or carbonated environment. Within the overall higher‐velocity stagnant slab, a low‐velocity anomaly was further detected, with a width of ~150 km,VpandVsreductions of 1% and 3% relative to IASP91. Such a gap may have provided a passage for hot deep mantle materials to penetrate through the thick slab and feed the Changbaishan volcano.
more »
« less
Slab Morphology, Dehydration, and Sub‐Arc Melting Beneath the Alaska Peninsula Revealed by Body‐Wave Tomography
Abstract The Alaska Peninsula has a long history of plate subduction with along‐arc variations in volcanic eruption styles and geochemistry. However, the sub‐arc melting processes that feed these volcanoes are unclear. The Alaska slab morphology below 200 km depth remains debated due to limited seismic data and thus low tomography resolution in this region. Here we utilize the newly available regional and teleseismic data to build 3‐D high‐resolutionVPandVSmodels to 660 km depth. We find that the high‐velocity Pacific Plate subducts to the bottom of the mantle transition zone (MTZ) with complex deformation and gaps. In the southwest, we observe a wide gap in the high‐velocity slab at 200–500 km depths. Toward the northeast, the slab becomes more continuous extending to the MTZ with a few holes below 200 km. We interpret these gaps as a slab tear that coincides with the subducted ancient Kula‐Pacific Ridge. We also invert for 3‐DVPandVP/VSmodels to 200 km depth with higher resolution and find strong along‐strike changes in slab dehydration and sub‐arc melting, indicated by lowVPand highVP/VSanomalies. Slab dehydration and sub‐arc melting are most extensive below the Pavlof and Shumagin segments in the southwest, becoming limited below the Chignik and Chirikof segments in the northeast, and extensive again beneath the Kodiak segment further to the northeast. We propose that the variations of slab hydration at the outer rise significantly influence slab dehydration at greater depths and further control sub‐arc melting beneath the Alaska Peninsula.
more »
« less
- PAR ID:
- 10576338
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Solid Earth
- Volume:
- 130
- Issue:
- 3
- ISSN:
- 2169-9313
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract A total of 10,586P‐to‐Sradial receiver functions recorded by 64 broadband seismic stations were utilized to image the 410 and 660 km discontinuities (d410 and d660, respectively) bordering the mantle transition zone (MTZ) beneath the Sumatra Island, the Malay Peninsula, and the western margin of the South China Sea. The d410 and d660 were imaged by stacking receiver functions in successive circular bins with a radius of 1°, after moveout corrections based on the 1‐D IASP91 Earth model. The resulting apparent depths of the discontinuities exhibit significant and spatially systematic variations. The apparent depths of the d410 and d660 range from 382 to 459 km and 637 to 700 km with an average of 406 ± 13 and 670± 12 km, respectively, while the corresponding values for the MTZ thickness are 217 to 295 km and 261 ± 13 km. Underneath southern Sumatra and adjacent regions, the MTZ is characterized by an uplifted d410 and a depressed d660. While the former is probably caused by the low temperature anomaly, the latter is most likely related to a combination of the low temperature anomaly and dehydration associated with the subducted Australian Plate that has reached at least the d660. In contrast, an abnormally thin MTZ is imaged to the southwest of the Toba Caldera. This observation, when combined with results from previous seismic tomography studies, can be explained by advective thermal upwelling through a slab window.more » « less
-
Abstract Alaska is a tectonically active region with a long history of subduction and terrane accretion, but knowledge of its deep seismic structure is limited by a relatively sparse station distribution. By combining data from the EarthScope Transportable Array and other regional seismic networks, we obtain a high‐resolution state‐wide map of the Moho and upper‐mantle discontinuities beneath Alaska using teleseismic SH‐wave reverberations. Crustal thickness is generally correlated with elevation and the deepest Moho is in the region with basal accretion of the subducted Yakutat plate, consistent with its higher density due to a more mafic composition. The crustal thickness in the Brooks Range agrees with the prediction based on Airy isostasy and the weak free‐air gravity anomaly, suggesting that this region probably does not have significant density anomalies. We also resolve the 410, 520, and 660 discontinuities in most regions, with a thickened mantle transition zone (MTZ) and a normal depth difference between the 520 and 660 discontinuities (d660‐d520) under central Alaska, indicating the presence of the subducted Pacific slab in the upper MTZ. A near‐normal MTZ and a significantly smaller d660‐d520 are resolved under southeastern Alaska, suggesting potential mantle upwelling in the lower MTZ. Beneath the Alaska Peninsula, the thinned MTZ implies that the Pacific slab may not have reached the MTZ in this region, which is also consistent with recent tomography models. Overall, the results demonstrate a bent or segmented Pacific slab with varying depths under central Alaska and the Alaska Peninsula.more » « less
-
Abstract A great earthquake struck the Semidi segment of the plate boundary along the Alaska Peninsula on 29 July 2021, re‐rupturing part of the 1938 rupture zone. The 2021MW8.2 Chignik earthquake occurred just northeast of the 22 July 2020MW7.8 Simeonof earthquake, with little slip overlap. Analysis of teleseismicPandSHwaves, regional Global Navigation Satellite System (GNSS) displacements, and near‐field and far‐field tsunami observations provides a good resolution of the 2021 rupture process. During ∼60‐s long faulting, the slip was nonuniformly distributed along the megathrust over depths from 32 to 40 km, with up to ∼12.9‐m slip in an ∼170‐km‐long patch. The 40–45 km down‐dip limit of slip is well constrained by GNSS observations along the Alaska Peninsula. Tsunami observations preclude significant slip from extending to depths <25 km, confining all coseismic slip to beneath the shallow continental shelf. Most aftershocks locate seaward of the large‐slip zones, with a concentration of activity up‐dip of the deeper southwestern slip zone. Some localized aftershock patches locate beneath the continental slope. The surface‐wave magnitudeMSof 8.1 for the 2021 earthquake is smaller thanMS = 8.3–8.4 for the 1938 event. Seismic and tsunami data indicate that slip in 1938 was concentrated in the eastern region of its aftershock zone, extending beyond the Semidi Islands, where the 2021 event did not rupture.more » « less
-
Abstract The distribution of intermediate‐depth and deep intraslab earthquakes with respect to subducting slabs offers a unique insight into seismogenesis at high pressures and temperatures that should inhibit brittle failure. This study constrains the surface of the subducting Pacific Plate beneath Japan at depths between 100 and 380 km based on a previous continental‐scale adjoint tomography model. Earthquake distributions relative to the slab surface reveal double seismic zones located within the top 60 km of the Pacific Plate. Thermal modeling suggests that the lower‐plane seismicity corresponds to temperatures between 400 and 900 °C. The seismogenic pressure and temperature conditions correlate approximately with the conditions of dehydration reactions of several hydrous minerals, that is, antigorite (serpentine) and chlorite at depths between 100 and 200 km and phase A at greater depths between 200 and 380 km. These correlations indicate that at these depths water released from dehydration processes may facilitate triggering slab mantle earthquakes.more » « less
