An official website of the United States government
Abstract The spatial organization of deformation may provide key information about the timing of catastrophic failure in the brittle regime. In an ideal homogenous system, deformation may continually localize toward macroscopic failure, and so increasing localization unambiguously signals approaching failure. However, recent analyses demonstrate that deformation, including low‐magnitude seismicity, and fractures and strain in triaxial compression experiments, experience temporary phases of delocalization superposed on an overall trend of localization toward large failure events. To constrain the conditions that promote delocalization, we perform a series of X‐ray tomography experiments at varying confining pressures (5–20 MPa) and fluid pressures (0–10 MPa) on Westerly granite cores with varying amounts of preexisting damage. We track the spatial distribution of the strain events with the highest magnitudes of the population within a given time step. The results show that larger confining pressure promotes more dilation, and promotes greater localization of the high strain events approaching macroscopic failure. In contrast, greater amounts of preexisting damage promote delocalization. Importantly, the dilative strain experiences more systematic localization than the shear strain, and so may provide more reliable information about the timing of catastrophic failure than the shear strain.
more »
« less
Spatial Persistence of High Strain Events During Brittle Failure
Abstract The onset of brittle failure in rocks includes dilatancy and strain localization. To better understand this nucleation process, we analyze the evolution of the local three‐dimensional strain tensor using X‐ray tomograms acquired during triaxial compression experiments on granite and sandstone. The onset of the localization of the compaction, dilation, and shear strain occurs when ∼65% of the rock volume experiences dilation. Tracking the locations of the high strains throughout loading suggests that the deformation that occurs early in loading influences the location of the system‐sized fracture network that produces macroscopic failure. This influence is larger in the sandstone experiments than the granite experiments, likely due to the microstructure of the sandstone. These results have important implications for detecting precursors to catastrophic failure.
more »
« less
- Award ID(s):
- 2218314
- PAR ID:
- 10576619
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geophysical Research Letters
- Volume:
- 51
- Issue:
- 21
- ISSN:
- 0094-8276
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)SUMMARY The yield surfaces of rocks keep evolving beyond the initial yield stress owing to the damage accumulation and porosity change during brittle deformation. Using a poroelastic damage rheology model, we demonstrate that the measure of coupling between the yield surface change and accumulated damage is correlated with strain localization and the Kaiser effect. Constant or minor yield surface change is associated with strong strain localization, as seen in low-porosity crystalline rocks. In contrast, strong coupling between damage growth and the yield surface leads to distributed deformation, as seen in high-porosity rocks. Assuming that during brittle deformation damage occurs primarily in the form of microcracks, we propose that the measured acoustic emission (AE) in rock samples correlates with the damage accumulation. This allows quantifying the Kaiser effect under cyclic loading by matching between the onset of AE and the onset of damage growth. The ratio of the stress at the onset of AE to the peak stress of the previous loading cycle, or Felicity Ratio (FR), is calculated for different model parameters. The results of the simulation show that FR gradually decreases in the case of weak coupling between yield surface and damage growth. For a strong damage-related coupling promoting significant yield surface change, the FR remains close to one and decreases only towards the failure. The model predicts that a steep decrease in FR is associated with a transition between distributed and localized modes of failure. By linking the evolving yield surface to strain localization patterns and the Kaiser effect, the poroelastic damage rheology model provides a new quantitative tool to study failure modes of brittle rocks.more » « less
-
Abstract We discuss data of three laboratory stick‐slip experiments on Westerly Granite samples performed at elevated confining pressure and constant displacement rate on rough fracture surfaces. The experiments produced complex slip patterns including fast and slow ruptures with large and small fault slips, as well as failure events on the fault surface producing acoustic emission bursts without externally‐detectable stress drop. Preparatory processes leading to large slips were tracked with an ensemble of ten seismo‐mechanical and statistical parameters characterizing local and global damage and stress evolution, localization and clustering processes, as well as event interactions. We decompose complex spatio‐temporal trends in the lab‐quake characteristics and identify persistent effects of evolving fault roughness and damage at different length scales, and local stress evolution approaching large events. The observed trends highlight labquake localization processes on different spatial and temporal scales. The preparatory process of large slip events includes smaller events marked by confined bursts of acoustic emission activity that collectively prepare the fault surface for a system‐wide failure by conditioning the large‐scale stress field. Our results are consistent overall with an evolving process of intermittent criticality leading to large failure events, and may contribute to improved forecasting of large natural earthquakes.more » « less
-
Abstract Critical processes including seismic faulting, reservoir compartmentalization, and borehole failure involve high‐pressure mechanical behavior and strain localization of sedimentary rocks such as sandstone. Sand is often used as a model material to study the mechanical behavior of poorly lithified sandstone. Recent studies exploring the multi‐scale mechanics of sand have characterized the brittle, low‐pressure regime of behavior; however, limited work has provided insights into the ductile, high‐pressure regime of behavior viain‐situmeasurements. Critical features of the ductile regime, including grain breakage, grain micromechanics, and volumetric strain behavior therefore remain under‐explored. Here, we use a new high‐pressure triaxial apparatus within‐situx‐ray tomography to provide new insights into deformation banding, grain breakage, and grain micromechanics in Ottawa sand subjected to triaxial compression under confining pressures between 10 and 45 MPa. We observed strain‐hardening at pressures above 15 MPa and strain‐neutral responses at pressures below 15 MPa. Compacting shear bands and grain breakage were observed at all pressures with no significant variation due to grain size, except for minor increases in breakage in less‐rounded sands. Grain breakage emerged at stress levels lower than the assumed yield threshold and more intense breakage was associated with thinner deformation bands. Contact sliding at inter‐grain contacts demonstrated a bifurcation into a bimodal distribution, with intense sliding within deformation bands and reduced but non‐negligible sliding outside of deformation bands, suggesting that off‐band zones remain mechanically active during strain hardening.more » « less
-
Background Porosity and other defects resultant by additive manufacturing processes are well-known to affect mechanical properties. However, there remains limited understanding regarding how the internal defect structure influences the evolution of the local strain field, as experimental investigations have not presented direct measurements of the evolving internal strain field in the presence of defects. Objective Interrupted in-situ tensile tests in a lab-based X-ray computed tomography machine were used to investigate the evolution of the strain field around internal defects. The evolution of the internal strain field facilitated examination of the role of specific defects in the macroscopic deformation of additively manufactured tensile coupons. Methods Samples were produced in 316L stainless steel by laser powder bed fusion. An in situ loading device was utilized to subject the samples to tensile failure within a tomographic scanning environment. Digital volume correlation was utilized to directly determine local strain levels within the additively manufactured components in the vicinity of porosity defects. Results Effects of porosity on strain localization and eventual failure of the samples were evaluated. Characteristics of the porosity distribution, including presence of porosity at the surface or near-surface of components, as well as the proximity of pores to each other were found to influence the evolution of failure. Early onset of failure was found to be associated with the availability of neighboring porosity that allowed for rapid progression of the fracture path. Conclusions The direct measurements of strain field evolution in the present study established understanding regarding how internal defect structure characteristics influence the evolution of the local strain field for additively manufactured components. This high fidelity characterization and the associated phenomenological observations have bearing for supporting validation of numerical modeling frameworks for describing failure in these materials.more » « less
