An official website of the United States government
Over the course of this project, the turbulence profiles from hundreds of different Terraformer roughness element configurations were collected, providing a very rich dataset of boundary layer flow as a function of upwind fetch. Vertically aligned turbulence measuring Cobra probes vertically separated by 160 mm are mounted on an automated articulating gantry programmed to move in three dimensions. In this manner, three vertical turbulence profiles in different lateral locations are measured during each experiment. The flow is driven by the eight vane axial fans and conditioned by the Irwin Spires through the inlet after which the boundary layer flow is developed over the Terraformer roughness element section before arriving at the measuring plane. The x direction is defined as the upstream from the vane axial fans, y direction is perpendicular to the x direction and represents the lateral locations of the measured vertical profiles. Finally, z represents the vertical height of the cobra probes from the floor of the UFBLWT.
more »
« less
Pressure coefficients on a simple geometry bluff body generated by a randomized terrain in a boundary layer wind tunnel, in Modeling of Higher-Order Turbulence from Randomized Terrain in a Boundary Layer Wind Tunnel
Boundary Layer Wind Tunnel (BLWT) facilities are commonly used for assessing wind loads on structures. Although BLWT facilities routinely match 1st and 2nd-order wind profile models, evidence suggests that turbulence in the roughness sublayer and the inertial sublayer exhibit non-Gaussian higher-order properties. These non-Gaussian properties can influence peak wind pressures, which govern certain structural limit states and play an important role in design. In the first part of this project, Machine learning (ML) methods are employed to identify relationships between roughness element configurations and higher-order statistical properties of the wind field. A semi-automated framework with an active learning portion and a wind tunnel experimental procedure is developed. The learning framework adaptively selects roughness profiles and launches new experiments to identify differing profiles with second-order equivalent flow as quantified by turbulence intensity. The premise is that second-order equivalent wind fields can differ in higher-order properties and therefore extreme value derived peak loads may differ. Over the course of this project, the turbulence profiles from hundreds of different Terraformer roughness element configurations were collected, providing a very rich dataset of boundary layer flow as a function of upwind fetch. Experiment 1 provides the metadata to describe and interpret measured wind profiles at the UFBLWT for a data set collected for the Benchmark experiments and 3 different phases: 1) Sinusoidal waves experiments, 2) Shape study experiments and, 3) Random field experiments. Experiment 2 of this dataset presents the results of experiments conducted in the UFBLWT, with a focus on measuring turbulence characteristics and pressure coefficients on a bluff body under varying terrain roughness configurations. The dataset provides valuable insights into the influence of upwind fetch and surface roughness on wind-induced forces, contributing to improved modeling and prediction of wind loads on structures. Based on the Terraformer configurations in experiment 1, select configurations (Benchmark and Phase 1 Terraformer configurations only) were chosen for bluff body experiments, along with additional approach turbulence measurements at a lateral location to the model. This dataset includes three key components for Benchmark and Phase 1 Terraformer configurations: reference wind velocity (uRef), lateral approach flow profiles (LatFlow), and pressure coefficients (Cpdata) on the bluff body.
more »
« less
- PAR ID:
- 10577963
- Publisher / Repository:
- Designsafe-CI
- Date Published:
- Subject(s) / Keyword(s):
- Boundary layer wind tunnel non-Gaussian equivalent wind fields turbulence intensity profiles bluff body pressure coefficients
- Format(s):
- Medium: X
- Location:
- DesignSafe Data Depot
- Institution:
- Boundary Layer Wind Tunnel - University of Florida
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This dataset includes flow velocity time series collected in a large boundary layer wind tunnel (BLWT) to investigate the intensity of large-scale turbulent gust structures generated by a novel flow-control instrument. The work leveraged a multi-stage flow conditioning system consisting of an active multi-fan gust generator, termed flow field modulator (FFM), that operated in conjunction with an automated roughness element grid (called Terraformer). The primary goal of the study is to assess the effectiveness of the coupled flow conditioning system (FFM and Terraformer) for increasing and tuning large-scale (particularly near-surface) turbulent structures that will enable characterization of their impact on building loads at relatively large BLWT scales (1:50). The dataset can be used and compared against previously published velocity measurements collected using traditional BLWT flow conditioning approaches (i.e., no active control of large-scale turbulence).more » « less
-
Longmire, Ellen K; Westerweel, Jerry (Ed.)This study leverages a novel multi-fan flow-control instrument and a mechanized roughness element grid to simulate large- and small-scale turbulent features of atmospheric flows in a large boundary layer wind tunnel (BLWT). The flow-control instrument, termed the flow field modulator (FFM), is a computer-controlled 3 m × 6 m (2D) fan array located at the University of Florida (UF) Natural Hazard Engineering Research Infrastructure (NHERI) Experimental Facility. The system comprises 319 modular hexagonal aluminum cells, each equipped with shrouded three-blade corotating propellers. The FFM enables the active generation of large-scale turbulent structures by replicating user-specified velocity time signals to inject low-frequency fluctuations into BLWT flows. In the present work, the FFM operated in conjunction with a mechanized roughness element grid, called the Terraformer, located downstream of the FFM array. The Terraformer aided in the production of near-wall turbulent mixing through precise adjustment of the height of the roughness elements. A series of BLWT velocity profile measurement experiments were carried out at the UF BLWT test section for a set of turbulence intensity and integral length scale regimes. Input commands to the FFM and Terraformer were iteratively updated via a governing convergence algorithm (GCA) to achieve user-specified mean and turbulent flow statistics. Results demonstrate the capabilities of the FFM for significantly increasing the longitudinal integral length scales compared to conventional BLWT approaches (i.e., no active large-scale turbulence generation). The study also highlights the efficacy of the GCA scheme for attaining prescribed target mean and turbulent flow conditions at the measurement location.more » « less
-
This project has investigated the wind-induced pressure loads on a realistic low-rise building within an urban area (Y2E2 building in Stanford Engineering Quad). Experiments were conducted at two wind tunnels; the NHERI Wall of Wind (WOW) wind tunnel at the Florida International University facility, and the NHERI terraformer Boundary Layer Wind Tunnel at the University of Florida (UF). First, the building is considered as isolated with suburban terrain in both WT facilities. Consequently, the surrounding buildings were included onto the turntable, and pressure measurements were conducted on the target building. In all experiments, the measurements were performed across a total of 28 wind directions, encompassing the complete wind rose.more » « less
-
This study applies computationally efficient shallow neural networks to predict topographic effect multipliers directly from digital elevation data obtained from complex terrain, such as mountainous areas. Data were obtained from boundary layer wind tunnel (BLWT) modeling of surface wind flow over six regions in mainland Puerto Rico and its municipal islands. The results demonstrate an improvement over linear regression models, even for computationally efficient low neuron count and single hidden layer models. The paper proposes the development of a global BLWT data atlas to inform development of methods to predict topographic wind speedup for a diverse range of topography and surface roughness conditions. It also identifies knowledge gaps that could prevent standardization of data collected from different BLWT experimental designs.more » « less
