An official website of the United States government
Sulfur is a key element in terrestrial magmatic processes yet its geochemical behavior remains one of the most difficult to model due to its heterovalent chemistry. The maximum amount of sulfur a silicate melt can dissolve before saturating with sulfide (e.g., pyrrhotite) or sulfate (e.g., anhydrite) changes with the redox state of the system and has important implications for the sulfur budget of a magmatic system. Several empirical models have been developed to predict the sulfur content of a silicate melt at either sulfide (under reducing conditions) or sulfate (under oxidizing conditions) saturation, but only one model existed that systematically assessed how the sulfur content of a basaltic melt changes as a function of oxygen fugacity (fO2) across the transition from sulfide- to sulfate-dominated conditions. The applicability of that model to intermediate and felsic melts rests on the assumption that changes in melt composition do not affect how sulfide or sulfate dissolves in the melt. Here, we report new experimental data that constrain the sulfur concentration at sulfide saturation (SCSS) and the sulfur concentration at anhydrite saturation (SCAS) in a dacitic melt as a function of fO2. The experiments were conducted using a H2Osaturated natural dacitic melt at 1000 C, 300 MPa, and at log fO2 varying over four orders of magnitude encompassing the sulfide-sulfate transition (log fO2 = DFMQ 0.7, DFMQ+0, DFMQ+0.5, DFMQ+1, DFMQ+1.48, DFMQ+1.54, DFMQ +1.75, DFMQ+2.08 and DFMQ+3.3). New SCSS and SCAS data and modeling for dacitic melts reveals that the sulfidesulfate transition occurs at DFMQ+1.81 ± 0.56, defined by the following equations to predict the sulfur content of intermediate to evolved silicate melts as a function of fO2: SCSSdacitic = [S2 ] (1 + 10(2.00DFMQ – 3.05)) SCASdacitic = [S6+] (1 + e(1.26 – 2.00DFMQ)) The results presented here demonstrate that the basaltic-derived SCSS-SCAS model is not appropriate for dacitic melts and that the sulfide-sulfate transition is shifted to higher fO2 in more evolved silicate melts. Implications include the stability of sulfides to higher fO2 in more evolved silicate melts and the potential for a narrower transition from a sulfide- to a sulfate-dominated melt than that predicted by thermodynamics.
more »
« less
This content will become publicly available on March 1, 2026
The role of dissolved sulfide in controlling copper speciation in basaltic melts
This study evaluates changes in copper (Cu) speciation that occur in sulfate-dominated basaltic and andesitic magmas equilibrated at oxygen fugacities (fO2’s) above the nickel-nickel oxide (NNO) buffer. Cu K-edge microfocused X-ray absorption fine structure spectroscopy (XAFS) data are presented from both natural and synthetic silicate glasses. Natural samples analyzed include olivine-hosted melt inclusions from tephra of mafic cinder cones in the Lassen segment of the Cascade arc (USA) and from the Michoacan-Guanajuato volcanic field (Mexico) as representative samples from melts equilibrated at fO2 > NNO. A comparison with melts equilibrated at fO2 < NNO is provided by analysis of olivine-hosted melt inclusions from Kīlauea Volcano. Data are also presented from copper- and sulfur-bearing synthetic hydrous andesitic glasses synthesized over a range of fO2, from roughly NNO-2 to NNO+2. The Cu spectroscopy data from the natural and synthetic glasses show two dominant Cu species, Cu1+ oxides (referred to here as Cu-O) and Cu1+ sulfides (referred to here broadly as Cu-S, but not precluding Cu-Fe-S species). The relative proportion of each species present correlates with the relative concentration of dissolved sulfide in the melt. Synthetic sulfur-bearing glasses equilibrated at NNO-1.2 were found to contain exclusively Cu-S species. Sulfur-bearing experimental glasses equilibrated at NNO-0.5 give calculated Cu-O/(Cu-O + Cu-S), defined here as the “Cu-O fraction”, of < 0.10, whereas sulfur-bearing glasses synthesized at NNO+0.6 and NNO+1.8 give calculated Cu-O fraction > 0.96. Natural melt inclusions from Lassen and Kīlauea show a bimodal distribution in Cu-O fraction, with overlapping ranges, of 0.14-0.77 for Lassen and 0.18- 0.78 for Kīlauea. Michoacan-Guanajuato inclusions yield Cu-O fractions of 0.68-0.91. The difference in the calculated proportions of Cu-O to Cu-S species appear correlated with available sulfide in the melt. As relative S2- concentrations decrease, the dissolved Cu species in the melt evolves from dominantly Cu-S to Cu-O. This includes melts equilibrated at fO2’s where S6+ is the dominant S species. At intermediate sulfide abundances both species appear to coexist. Thermodynamic modeling of the Cu speciation in these silicate melts suggests that speciation of Cu as a CuFeS2 melt species (akin to chalcopyrite or intermediate solid solution) most accurately predicts the measured Cu species. The modeling suggests that aFeO in the silicate melt, fO2 and melt S2- (expressed as fS2) are the most important parameters controlling the proportions of Cu-O vs. Cu-S species. Our results provide a new perspective for understanding Cu solubility, transport, and partitioning in magmatic systems.
more »
« less
- Award ID(s):
- 1834930
- PAR ID:
- 10578290
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Geochimica et Cosmochimica Acta
- ISSN:
- 0016-7037
- Subject(s) / Keyword(s):
- Copper Spectroscopy X-ray Absorption Silicate Melt Speciation
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The large range in oxidation states of sulfur (-II to +VI) provides it with a large oxidation potential in rocks, even at relatively low concentrations. Most importantly, the transition from sulfide to sulfate species in rocks and silicate melts occurs in the same approximate fO2 region (for a given temperature) as the transition from ferrous to ferric iron, and reduced S species can coexist with oxidized Fe and vice versa. The result is a large potential for reactions involving sulfur to oxidize or reduce Fe in silicate minerals, since Fe only occurs in two oxidation states (+II and +III). In order for sulfur to be released during slab dehydration, sulfur in sulfide must be converted into an easily dissolved species, such as SO42− or H2S, through either oxidation or reduction. We propose that oxidation of sulfur in sulfide follows the generalized reaction: 8Fe3+SiaOb(OH)c +S2− = 8Fe2+SidOe +SO42− +(H2O)f (1) In this type of reaction, sulfur participates in the dehydration of greenschist- or blueschist-facies hydrous silicates during transition to the eclogite facies: ferric Fe in Fe-bearing silicates (chlorite, amphibole, epidote) is reduced to ferrous Fe in anhydrous ferromagnesian silicates (pyroxene, garnet). At the same time, the reaction consumes sulfide by oxidation of S2− to produce SO42−, which is readily dissolved in the fluid produced during dehydration. Additionally, a similar redox reaction could oxidize sulfur by reducing ferric Fe in oxides. It is important to note that one mole of S has the same redox potential as 8 moles of Fe. The molar ratio of 8 moles of Fe per 1 mole of S translates to a mass ratio of approximately 14; therefore, small concentrations of sulfur can have a large impact on reduction/oxidation of the silicate assemblage. Our observations show that sulfide minerals that can be identified as primary or related to the peak metamorphic stage are rare in eclogites and restricted to inclusions in garnet, consistent with reaction (1). Thermodynamic modeling is currently underway to assess the influence of sulfur on the phase equilibria of silicate phases during high pressure metamorphism.more » « less
-
Abstract The mineral apatite, Ca10(PO4)6(F,OH,Cl)2, incorporates sulfur (S) during crystallization from S-bearing hydrothermal fluids and silicate melts. Our previous studies of natural and experimental apatite demonstrate that the oxidation state of S in apatite varies systematically as a function of oxygen fugacity (fO2). The S oxidation states –1 and –2 were quantitatively identified in apatite crystallized from reduced, S-bearing hydrothermal fluids and silicate melts by using sulfur K-edge X-ray absorption near-edge structure spectroscopy (S-XANES) where S 6+/ΣS in apatite increases from ~0 at FMQ-1 to ~1 at FMQ+2, where FMQ refers to the fayalite-magnetite-quartz fO2 buffer. In this study, we employ quantum-mechanical calculations to investigate the atomistic structure and energetics of S(-I) and S(-II) incorporated into apatite and elucidate incorporation mechanisms. One S(-I) species (disulfide, S22−) and two S(-II) species (bisulfide, HS−, and sulfide, S2−) are investigated as possible forms of reduced S species in apatite. In configuration models for the simulation, these reduced S species are positioned along the c-axis channel, originally occupied by the column anions F, Cl, and OH in the end-member apatites. In the lowest-energy configurations of S-incorporated apatite, disulfide prefers to be positioned halfway between the mirror planes at z = 1/4 and 3/4. In contrast, the energy-optimized bisulfide is located slightly away from the mirror planes by ~0.04 fractional units in the c direction. The energetic stability of these reduced S species as a function of position along the c-axis can be explained by the geometric and electrostatic constraints of the Ca and O planes that constitute the c-axis channel. The thermodynamics of incorporation of disulfide and bisulfide into apatite is evaluated by using solid-state reaction equations where the apatite host and a solid S-bearing source phase (pyrite and Na2S2(s) for disulfide; troilite and Na2S(s) for sulfide) are the reactants, and the S-incorporated apatite and an anion sink phase are the products. The Gibbs free energy (ΔG) is lower for incorporation with Na-bearing phases than with Fe-bearing phases, which is attributed to the higher energetic stability of the iron sulfide minerals as a source phase for S than the sodium sulfide phases. The thermodynamics of incorporation of reduced S is also evaluated by using reaction equations involving dissolved disulfide and sulfide species [HnS(aq)(2−n) and HnS(aq)(2−n); n = 0, 1, and 2] as a source phase. The ΔG of S-incorporation increases for fluorapatite and chlorapatite, and decreases for hydroxylapatite, as these species are protonated (i.e., as n changes from 0 to 2). These thermodynamic results demonstrate that the presence of reduced S in apatite is primarily controlled by the chemistry of magmatic and hydrothermal systems where apatite forms (e.g., an abundance of Fe; solution pH). Ultimately, our methodology developed for evaluating the thermodynamics of S incorporation in apatite as a function of temperature, pH, and composition is highly applicable to predicting the trace and volatile element incorporation in minerals in a variety of geological systems. In addition to solid-solid and solid-liquid equilibria treated here at different temperatures and pH, the methodology can be easily extended to different pressure conditions by just performing the quantum-mechanical calculations at elevated pressures.more » « less
-
The mineral apatite, Ca10(PO4)6(F,OH,Cl)2, incorporates sulfur (S) during crystallization from S-bearing hydrothermal fluids and silicate melts. Our previous studies of natural and experimental apatite demonstrate that the oxidation state of S in apatite varies systematically as a function of oxygen fugacity (fO2). The S oxidation states –1 and –2 were quantitatively identified in apatite crystallized from reduced, S-bearing hydrothermal fluids and silicate melts by using sulfur K-edge X‑ray absorption near-edge structure spectroscopy (S-XANES) where S6+/ΣS in apatite increases from ~0 at FMQ-1 to ~1 at FMQ+2, where FMQ refers to the fayalite-magnetite-quartz fO2 buffer. In this study, we employ quantum-mechanical calculations to investigate the atomistic structure and energetics of S(-I) and S(-II) incorporated into apatite and elucidate incorporation mechanisms. One S(-I) species (disulfide, S22−) and two S(-II) species (bisulfide, HS−, and sulfide, S2−) are investigated as possible forms of reduced S species in apatite. In configuration models for the simulation, these reduced S species are positioned along the c-axis channel, originally occupied by the column anions F, Cl, and OH in the end-member apatites. In the lowest-energy configurations of S-incorporated apatite, disulfide prefers to be positioned halfway between the mirror planes at z = 1/4 and 3/4. In contrast, the energy-optimized bisulfide is located slightly away from the mirror planes by ~0.04 fractional units in the c direction. The energetic stability of these reduced S species as a function of position along the c-axis can be explained by the geometric and electrostatic constraints of the Ca and O planes that constitute the c-axis channel. The thermodynamics of incorporation of disulfide and bisulfide into apatite are evaluated by using solid-state reaction equations where the apatite host and a solid S-bearing source phase (pyrite and Na2S2(s) for disulfide; troilite and Na2S(s) for sulfide) are the reactants, and the S-incorporated apatite and an anion sink phase are the products. The Gibbs free energy (ΔG) is lower for incorporation with Na-bearing phases than with Fe-bearing phases, which is attributed to the higher energetic stability of the iron sulfide minerals as a source phase for S than the sodium sulfide phases. The thermodynamics of incorporation of reduced S are also evaluated by using reaction equations involving dissolved disulfide and sulfide species [HnS2(aq)(2–n) and HnS(aq)(2–n); n = 0, 1, and 2] as a source phase. The ΔG of S-incorporation increases for fluorapatite and chlorapatite and decreases for hydroxylapatite as these species are protonated (i.e., as n changes from 0 to 2). These thermodynamic results demonstrate that the presence of reduced S in apatite is primarily controlled by the chemistry of magmatic and hydrothermal systems where apatite forms (e.g., an abundance of Fe; solution pH). Ultimately, our methodology developed for evaluating the thermodynamics of S incorporation in apatite as a function of temperature, pH, and composition is highly applicable to predicting the trace and volatile element incorporation in minerals in a variety of geological systems. In addition to solid-solid and solid-liquid equilibria treated here at different temperatures and pH, the methodology can be easily extended also to different pressure conditions by just performing the quantum-mechanical calculations at elevated pressures.more » « less
-
We present DiadFit—an open-source Python3 tool for efficient processing of Raman spectroscopy data collected from fluid inclusions, melt inclusions and silicate melts. DiadFit is optimized to fit the characteristic peaks from CO2 fluids (Fermi diads, hot bands, 13C), gas species such as SO2, N2, solid precipitates (e.g. carbonates), and Ne emission lines with easily tweakable background positions and peak shapes. DiadFit's peak fitting functions are used as part of a number of workflows optimized for quantification of CO2 in melt inclusion vapour bubbles and fluid inclusions. DiadFit can also convert between temperature, pressure and density using various CO2 and CO2-H2O equations of state (EOS), allowing calculation of fluid inclusion pressures (and depths in the crust), conversion of homogenization temperatures from microthermometry to CO2 density, and propagation of uncertainties associated with EOS calculations using Monte Carlo methods. There are also functions to quantify the area ratio of the silicate vs. H2O region of spectra collected on silicate glasses to determine H2O contents in glasses and melt inclusions. Documentation and worked examples are available (https://bit.ly/DiadFitRTD, https://bit.ly/DiadFitYouTube).more » « less
