An official website of the United States government
High performance carbon fibers are widely used as fiber reinforcements in composite material systems for aerospace, automotive, and defense applications. Longitudinal tensile failure of such composite systems is a result of clustering of single fiber tensile failures occurring at the microscale, on the order of a few microns to a few hundred microns. Since fiber tensile strength at the microscale has a first order effect on composite strength, it is important to characterize the strength of single fibers at microscale gage lengths which is extremely challenging. An experimental technique based on a combination of transverse loading of single fibers under SEM with DIC is a potential approach to access microscale gage lengths. The SEM-DIC technique requires creation of uniform, random, and contrastive sub-microscale speckle pattern on the curved fiber surface for accurate strain measurements. In this paper, we investigate the formation of such sub-microscale speckle patterns on individual sized IM7 carbon fibers of nominal diameter 5.2 µm via sputter coating. Various process conditions such as working pressure, sputtering current, and coating duration are investigated for pattern creation on fiber surface using a gold-palladium (Au-Pd) target. A nanocluster type sub-microscale pattern is obtained on the fiber surface for different coating conditions. Numerical translation experiments are performed using the obtained patterns to study image correlation and identify a suitable pattern for SEM-DIC experiments. The pattern obtained at a working pressure of 120–140 mTorr with 50 mA current for a duration of 10 min is found to have an average speckle size of 53 nm and good contrast for image correlation. Rigid body translation SEM experiments for drift/distortion correction using a sized IM7 carbon fiber coated with the best patterning conditions showed that Stereo-SEM-DIC is needed for accurately characterizing fiber strain fields due to its curved surface. The effect of sputter coating on fiber tensile strength and strain is investigated via single fiber tensile tests. Results showed that there is no significant difference in the mean tensile strength and failure strain between uncoated and coated fibers (average increment in fiber diameter of ∼221 nm due to coating) at 5% significance level. SEM images of failure surfaces for uncoated and coated fibers also confirmed a tensile failure of fibers as observed for polyacrylonitrile PAN-based fibers in literature.
more »
« less
This content will become publicly available on November 25, 2025
Measurement of dynamic deformation during shock loading using a fiber-optic loop-sensor
Abstract Characterizing materials under shock loading has been of interest in fields such as protective material development, biomechanics to study the injury mechanics and high-speed aerodynamic structures. However, shock loading of material is a very short duration phenomenon and it is extremely challenging to develop sensors for dynamic measurements under such loading conditions. Optical fiber sensors present the possibilities to allow high resolution measurement of displacement in such high strain rate loading conditions. This work studies the possibility of using a fiber-optic loop sensor (FOLS) based on the principle of power losses from the curved section for dynamic measurements under shock loading conditions. The displacement results obtained from the optical sensors are compared with the traditional strain gauge and digital image correlation (DIC) measurements. The result obtained by the FOLS closely matched the sensitivity and precision of the strain gauges and had higher precision than that of DIC.
more »
« less
- Award ID(s):
- 1952479
- PAR ID:
- 10581354
- Publisher / Repository:
- IoP Science
- Date Published:
- Journal Name:
- Measurement Science and Technology
- Volume:
- 36
- Issue:
- 1
- ISSN:
- 0957-0233
- Page Range / eLocation ID:
- 015124
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Elastomeric rollers are important components in applications such as printing and roll-to-roll manufacturing. To gain insight into roller mechanics and provide a basis for further investigations into dynamic rolling problems where rolling instabilities and rolling friction arise, we employ a specially designed apparatus to obtain displacement and strain fields via digital image correlation (DIC) under applied loads.We test loading scenarios leading to impending slip of an elastomeric roller, mounted on a steel hub, and in contact with a glass (rigid) substrate. We first examine strain fields under normal loading and compare them with the closest analytical predictions. We also analyze the strain fields under normal and tangential loading for which limited analytical predictions exist. For each loading scenario, we discuss the displacement and strain fields of the roller sidewall and contact interface. We implement a conceptual string model to demonstrate how stick and slip zones develop within the contact area as well as how memory effects arise during cyclic loading. This memory effect is then verified experimentally using the DIC strain fields. Additionally, we demonstrate a means for identifying the stick zone area between the roller and substrate using the experimentally-obtained displacement fields. We believe the apparatus, and the ability to obtain experimental displacement and strain fields, will prove valuable in understanding roller mechanics and associated instabilities.more » « less
-
Digital image correlation (DIC) is an increasingly popular and effective non-contact method for measuring full-field displacements and strains of deformable bodies under load. Current DIC methods applied to bodies undergoing large displacements and rotations require a large measurement area for both the reference (i.e., undeformed) image and the deformed images. This can limit the resulting resolution of the displacement and strain fields. To address this issue, we propose a two-stage dynamic DIC method capable of measuring displacements and strains under material convection with high resolution. During the first stage, the reference image is assembled from smaller, high-resolution images of the undeformed object obtained using a spatially-fixed or moving frame. Following capture, each sub-image is rigidly translated and rotated into its appropriate place, thereby producing a full, high-resolution image of the reference body. In stage two, images of the loaded and deformed body, again obtained using a small camera frame with high resolution, are aligned with matching regions of the undeformed composite image using BRISK feature detection before performing DIC.We demonstrate the method on a contact problem whereby an elastomeric roller travels along a rigid surface. In doing so, we obtain fine resolution measurements of the state of strain of the region of the roller sidewall in contact with the substrate, even as new material convects through the region of interest. We present these measurements as a series of images and videos capturing strain evolution as the roller transitions from static loads to a fully dynamic steady-state, documenting the effectiveness of the method.more » « less
-
Abstract Conventional strain gauges are not designed for accurate measurement over the large range of deformations possible in compliant textiles. The thin, lightweight, and flexible nature of textiles also makes it challenging to attach strain gauges in a way that does not affect the mechanical properties. In this manuscript, soft, highly extensible fibers that propagate light (i.e., stretchable lightguides) are stitched as a strain gauge to map the deformation of a nylon parachute textile under tension. When under load, these fiber optic strain gauges propagate less light, and this strain‐induced light modulation is used to accurately (absolute error≈2.93%; Std. Dev.: 3.02%) measure strain in the <30% range before these textiles fail. This system has directionality; strain in parallel to the sensor results in little light attenuation while perpendicular loading shows high sensitivity (Gauge factor⊥≈24.8 and Gauge factor||≈0.05 at the first 1% strain). Structural and optical simulations are coupled to demonstrate that load transfer on the fiber optic by the stitchwork is the dominating cause of signal modulation. To further validate the hypotheses, digital image correlation was used under dynamic loading conditions to show that these sensors do not significantly affect the mechanical properties.more » « less
-
Sanders, Glen A.; Lieberman, Robert A.; Udd Scheel, Ingrid (Ed.)Each year, the global cost that is accounted to corrosion was estimated at $2.5 trillion. Corrosion not only imposes an economic burden, when corroded structures are under various loading conditions, it may also lead to structurally brittle failure, posing a potential threat to structural reliability and service safety. Although considerable studies investigated the combined effect of external loads and structural steel corrosion, many of the current findings on synergetic interaction between stress and corrosion are contrary. In this study, the combined effects of dynamic mechanical loads and corrosion on epoxy coated steel are investigated using the distributed fiber optic sensors based on optical frequency domain reflectometry. Experimental studies were performed using the serpentine-arranged distributed fiber optic strain sensors embedded inside the epoxy with three different scenarios including the impact loading-only, corrosion-only, and combined impact loading-corrosion tests. Test results demonstrated that the distributed fiber optic sensors can locate and detect the corrosion processing paths by measuring the induced strain changes. The combined impact loading-corrosion condition showed significantly accelerated corrosion progression caused by mechanical loads, indicating the significant interaction between dynamic mechanical loading and corrosion on epoxy coated steel.more » « less
