An official website of the United States government
Abundant heterogeneity has been documented on faults in nature across a wide range of length scales, including structural, mineralogical, and roughness variations. The role of complex heterogeneity on fault mechanics and frictional stability is not well established, and experiments investigating heterogeneity have typically incorporated a single source of heterogeneity. Here, we conduct rock friction experiments on rough, bimaterial faults that are creeping, or steadily sliding, to explore the role of lithological heterogeneity on fault mechanics and stability. When strong asperities juxtapose weak gouge, stable sliding occurs with a low friction coefficient, µ. Encounters of strong diabase asperities on talc gouge lined faults initiate dramatic increases in µ and transitions to unstable sliding characterized by frequent stick-slip events (StSE). Seismic moments and stress drops of StSE decrease with increasing asperity abundance. Stress is concentrated at asperities during encounters, increasing with decreasing asperity abundance and leading to extensive mechanical damage. Interactions between strong, velocity weakening asperities provide a model to explain the nucleation of seismic and aseismic slip events on nominally stable, creeping faults.
more »
« less
This content will become publicly available on March 18, 2026
Velocity Dependence of Dynamic Rock Friction Modulated by Dynamic Rupture in High‐Speed Friction and Stick‐Slip Tests
Abstract Rock friction tests have made profound contributions to our understanding of earthquake processes. Most rock friction tests focused on fault strength evolution during velocity steps or at specific slip rates and the characteristics during stick‐slip events such as dynamic rupture propagation and the transition from stable sliding to instability, with little attention paid to the transient acceleration and deceleration periods. Here, we present Westerly Granite fault friction test results using a unique pneumatically powered apparatus with high acceleration of up to 50 g, focusing on the transient stages of fast fault acceleration and deceleration during both high‐speed sliding and stick‐slip events. Our data demonstrates the dominating velocity‐weakening behavior at transient stages of fault acceleration and deceleration, with a 1/V dependence for peak friction and deceleration lobe consistent with the flash‐heating model but with the acceleration lobe consistently deviating from the 1/V dependence. Our analysis of velocity‐dependent friction between dynamic rupture events, stick‐slips, and high‐speed friction tests reveals the significance of high acceleration in influencing transient fault weakening during dynamic weakening. We further demonstrate that the deviation of the friction‐velocity curve from the 1/V trend during fault acceleration is associated with the contribution of the dynamic rupturing process during the initiation of fault slip.
more »
« less
- Award ID(s):
- 2225216
- PAR ID:
- 10581446
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Solid Earth
- Volume:
- 130
- Issue:
- 3
- ISSN:
- 2169-9313
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Understanding the dynamics of microearthquakes is a timely challenge with the potential to address current paradoxes in earthquake mechanics, and to better understand earthquake ruptures induced by fluid injection. We perform fully 3D dynamic rupture simulations caused by fluid injection on a target fault for Fault Activation and Earthquake Ruptures experiments generatingMw ≤ 1 earthquakes. We investigate the dynamics of rupture propagation with spatially variable stress drop caused by pore pressure changes and assuming different slip‐weakening constitutive parameters. We show that the spontaneous arrest of propagating ruptures is possible by assuming a high fault strength parameter S, that is, a high ratio between strength excess and dynamic stress drop. In faults with high S values (low rupturing potential), even minor variations inDc(from 0.45 to 0.6 mm) have a substantial effect on the rupture propagation and the ultimate earthquake size. Modest spatial variations of dynamic stress drop determine the rupture mode, distinguishing self‐arresting from run‐away ruptures. Our results suggest that several characteristics inferred for accelerating dynamic ruptures differ from those observed during rupture deceleration of a self‐arresting earthquake. During deceleration, a decrease of peak slip velocity is associated with a nearly constant cohesive zone size. Moreover, the residual slip velocity value (asymptotic value for a crack‐like rupture) decreases to nearly zero. This means that an initially crack‐like rupture becomes a pulse‐like rupture during spontaneous arrest. These findings highlight the complex dynamics of small induced earthquakes, which differ from solutions obtained from conventional crack‐like models of earthquake rupture.more » « less
-
Abstract The empirical rate‐ and state‐dependent friction law is widely used to explain the frictional resistance of rocks. However, the constitutive parameters vary with temperature and sliding velocity, preventing extrapolation of laboratory results to natural conditions. Here, we explain the frictional properties of natural gouge from the San Andreas Fault, Alpine Fault, and the Nankai Trough from room temperature to ∼300°C for a wide range of slip‐rates with constant constitutive parameters by invoking the competition between two healing mechanisms with different thermodynamic properties. A transition from velocity‐strengthening to velocity‐weakening at steady‐state can be attained either by decreasing the slip‐rate or by increasing temperature. Our study provides a framework to understand the physics underlying the slip‐rate and state dependence of friction and the dependence of frictional properties on ambient physical conditions.more » « less
-
Basal slip along glaciers and ice streams can be significantly modified by external time-dependent forcing, although it is not clear why some systems are more sensitive to tidal stresses. We have conducted a series of laboratory experiments to explore the effect of time varying load point velocity on ice-on-rock friction. Varying the load point velocity induces shear stress forcing, making this an analogous simulation of aspects of ice stream tidal modulation. Ambient pressure, double-direct shear experiments were conducted in a cryogenic servo-controlled biaxial deformation apparatus at temperatures between −2°C and −16°C. In addition to a background, median velocity (1 and 10 μm/s), a sinusoidal velocity was applied to the central sliding sample over a range of periods and amplitudes. Normal stress was held constant over each run (0.1, 0.5 or 1 MPa) and the shear stress was measured. Over the range of parameters studied, the full spectrum of slip behavior from creeping to slow-slip to stick-slip was observed, similar to the diversity of sliding styles observed in Antarctic and Greenland ice streams. Under conditions in which the amplitude of oscillation is equal to the median velocity, significant healing occurs as velocity approaches zero, causing a high-amplitude change in friction. The amplitude of the event increases with increasing period (i.e. hold time). At high normal stress, velocity oscillations force an otherwise stable system to behave unstably, with consistently-timed events during every cycle. Rate-state friction parameters determined from velocity steps show that the ice-rock interface is velocity strengthening. A companion paper describes a method of analyzing the oscillatory data directly. Forward modeling of a sinusoidally-driven slider block, using rate-and-state dependent friction formulation and experimentally derived parameters, successfully predicts the experimental output in all but a few cases.more » « less
-
Abstract While analysis of glacial seismicity continues to be a widely used method for interpreting glacial processes, the underlying mechanics controlling glacial stick‐slip seismicity remain speculative. Here, we report on laboratory shear experiments of debris‐laden ice slid over a bedrock asperity under carefully controlled conditions. By modifying the elastic loading stiffness, we generated the first laboratory icequakes. Our work represents the first comprehensive lab observations of unstable ice‐slip events and replicates several seismological field observations of glacier slip, such as slip velocity, stress drop, and the relationship between stress drop and recurrence interval. We also observe that stick‐slips initiate above a critical driving velocity and that stress drop magnitude decreases with further increases in velocity, consistent with friction theory and rock‐on‐rock friction laboratory experiments. Our results demonstrate that glacier slip behavior can be accurately predicted by the constitutive rate‐and‐state friction laws that were developed for rock friction.more » « less
