An official website of the United States government
In self-assembling systems, geometric frustration leads to complex states characterized by internal gradients of shape misfit. Frustrated assemblies have drawn recent interest due to the unique possibility that their thermodynamics can sense and select the finite size of assembly at length scales much larger than constituent building blocks or their interactions. At present, self-limitation is chiefly understood to derive from zero-temperature considerations, specifically the competition between cohesion and scale-dependent elastic costs of frustration. While effects of entropy and finite-temperature fluctuations are necessarily significant for self-assembling systems, their impact on the self-limiting states of frustrated assemblies is not known. We introduce a generic, minimal model of frustrated assembly and establish its finite-temperature and concentration-dependent thermodynamics by way of simulation and continuum theory. The phase diagram is marked by three distinct states of translation order: a dispersed vapor, a defect-riddled condensate, and the self-limiting aggregate state. We show that, at finite temperature, the self-limiting state is stable at intermediate frustration. Furthermore, in contrast to the prevailing picture, its thermodynamic boundaries with the macroscopic disperse and bulk states are temperature controlled, pointing to the essential importance of translational and conformational entropy in their formation.
more »
« less
Geometrically Frustrated, Mechanical Metamaterial Membranes: Large-Scale Stress Accumulation and Size-Selective Assembly
We study the effect of geometric frustration on dilational mechanical metamaterial membranes. While shape frustrated elastic plates can only accommodate nonzero Gaussian curvature up to size scales that ultimately vanish with their elastic thickness, we show that frustrated metamembranes accumulate hyperbolic curvatures up to mesoscopic length scales that are ultimately independent of the size of their microscopic constituents. A continuum elastic theory and discrete numerical model describe the size-dependent shape and internal stresses of axisymmetric, trumpetlike frustrated metamembranes, revealing a nontrivial crossover to a much weaker power-law growth in elastic strain energy with size than in frustrated elastic membranes. We study a consequence of this for the self-limiting assembly thermodynamics of frustrated trumpets, showing a severalfold increase in the size range of self-limitation of metamembranes relative to elastic membranes.
more »
« less
- PAR ID:
- 10583641
- Publisher / Repository:
- American Physical Society
- Date Published:
- Journal Name:
- Physical Review Letters
- Volume:
- 134
- Issue:
- 7
- ISSN:
- 0031-9007
- Page Range / eLocation ID:
- 078201
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We study the ground state thermodynamics of a model class of geometrically frustrated assemblies, known as warped-jigsaw particles. While it is known that frustration in soft matter assemblies has the ability to propagate up to mesoscopic, multi-particle size scales, notably through the selection of the self-limiting domain, little is understood about how the symmetry of shape-misfit at the particle scale influences emergent morphologies at the mesoscale. Here we show that polarity in the shape-misfit of warped-jigsaw puzzles manifests at a larger scale in the morphology and thermodynamics of the ground-state assembly of self-limiting domains. We use a combination of continuum theory and discrete particle simulations to show that the polar misfit gives rise to two mesoscopically distinct polar, self-limiting ribbon domains. Thermodynamic selection between the two ribbon morphologies is controlled by a combination of the binding anisotropy along distinct neighbor directions and the orientation of polar shape-misfit. These predictions are valuable as design features for ongoing efforts to program self-limiting assemblies through the synthesis of intentionally frustrated particles, further suggesting a generic classification of frustrated assembly behavior in terms of the relative symmetries of shape-misfit and the underlying long-range inter-particle order it frustrates.more » « less
-
In geometrically frustrated assemblies local intersubunit misfits propagate to intra-assembly strain gradients, giving rise to anomalous self-limiting assembly thermodynamics. Here we use theory and coarse-grained simulation to study a recently developed class of “curvamer” particles, flexible shell-like particles that exhibit self-limiting assembly due to the build up of curvature deformation in cohesive stacks. To address a generic, yet poorly understood aspect of frustrated assembly, we introduce a model of curvamer assembly that incorporates both intraparticle shape deformation as well as compliance of interparticle cohesive gaps, an effect we can attribute to a finite range of attraction between particles. We show that the ratio of intraparticle (bending elasticity) to interparticle stiffness not only controls the regimes of self-limitation but also the nature of frustration propagation through curvamer stacks. We find a transition from uniformly bound, curvature-focusing stacks at small size to gap opened, uniformly curved stacks at large size is controlled by a dimensionless measure of inter- versus intracurvamer stiffness. The finite range of interparticle attraction determines the range of cohesion in stacks that are self-limiting, a prediction which is in strong agreement with numerical studies of our coarse-grained colloidal model. These predictions provide critical guidance for experimental realizations of frustrated particle systems designed to exhibit self-limitation at especially large multiparticle scales.more » « less
-
Geometric frustration offers a pathway to soft matter self-assembly with controllable finite sizes. While the understanding of frustration in soft matter assembly derives almost exclusively from continuum elastic descriptions, a current challenge is to understand the connection between microscopic physical properties of misfitting “building blocks” and emergent assembly behavior at the mesoscale. We present and analyze a particle-based description of what is arguably the best studied example for frustrated soft matter assembly, negative-curvature ribbon assembly, observed in both assemblies of chiral surfactants and shape-frustrated nanoparticles. Based on our particle model, known as saddle wedge monomers, we numerically test the connection between microscopic shape and interactions of the misfitting subunits and the emergent behavior at the supra-particle scale, specifically focussing on the propagation and relaxation of inter-particle strains, the emergent role of extrinsic shape on frustrated ribbons and the equilibrium regime of finite width selection. Beyond the intuitive role of shape misfit, we show that self-limitation is critically dependent on the finite range of cohesive interactions, with larger size finite assemblies requiring increasing short-range interparticle forces. Additionally, we demonstrate that non-linearities arising from discrete particle interactions alter self-limiting behavior due to both strain-softening in shape-flattened assembly and partial yielding of highly strained bonds, which in turn may give rise to states of hierarchical, multidomain assembly. Tracing the regimes of frustration-limited assembly to the specific microscopic features of misfitting particle shapes and interactions provides necessary guidance for translating the theory of size-programmable assembly into design of intentionally-frustrated colloidal particles.more » « less
-
Abstract Geometrically frustrated assembly has emerged as an attractive paradigm for understanding and engineering assemblies with self-limiting, finite equilibrium dimensions. We propose and study a novel 2D particle based on a so-called ‘warped jigsaw’ (WJ) shape design: directional bonds in a tapered particle favor curvature along multi-particle rows that frustrate 2D lattice order. We investigate how large-scale intra-assembly stress gradients emerge from the microscopic properties of the particles using a combination of numerical simulation and continuum elasticity. WJ particles can favor anisotropic ribbon assemblies, whose lateral width may be self-limiting depending on the relative strength of cohesive to elastic forces in the assembly, which we show to be controlled by the range of interactions and degree of shape misfit. The upper limits of self-limited size are controlled by the crossover between two elastic modes in assembly: the accumulation of shear with increasing width at small widths giving way to unbending of preferred row curvature, permitting assembly to grow to unlimited sizes. We show that the stiffness controlling distinct elastic modes is governed by combination and placement of repulsive and attractive binding regions, providing a means to extend the range of accumulating stress to sizes that are far in excess of the single particle size, which we corroborate via numerical studies of discrete particles of variable interactions. Lastly, we relate the ground-state energetics of the model to lower and upper limits on equilibrium assembly size control set by the fluctuations of width along the ribbon boundary.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1103/PhysRevLett.134.078201
