An official website of the United States government
A series of atomic-like photoluminescence (PL) emission peaks in UV region near 4.0 eV were created by thermal annealing hexagonal boron nitride (h-BN) single crystals in air. The pristine h-BN did not have these peaks, emitting strong phonon-assisted band edge PL with peaks at 5.78 and 5.89 eV. After annealing the h-BN crystals in ambient air, a new atomic-like sharp emission in UV region at 4.09 eV with a line width of 0.2 nm appeared along with its phonon replicas at 3.89 and 3.69 eV in the low temperature (8 K) PL measurement. Further testing demonstrated that annealing the h-BN samples in the temperature window of 700–950 °C for 60 min generated the atomic-like emission. The peak position of the emission line is stable with the temperature and PL excitation power. Our study also suggests that the defect responsible for the atomic-like emission resides in the surface region.
more »
« less
Optical Properties of Low‐Defect Large‐Area Hexagonal Boron Nitride for Quantum Applications
Intrinsic defects and their concentrations in hexagonal boron nitride (h‐BN) play a key role in single‐photon emission. In this study, the optical properties of large‐area multilayer h‐BN‐on‐sapphire grown by metal‐organic chemical vapor deposition are explored. Based on the detailed spectroscopic characterization using both cathodoluminescence (CL) and photoluminescence (PL) measurements, the material is devoid of random single‐point defects instead of a few clustered complex defects. The emission spectra of the measurements confirm a record‐low‐defect concentration of ≈104 cm−2. Post‐annealing, no significant changes are observed in the measured spectra and the defect concentrations remain unaltered. Through CL and PL spectroscopy, an optically active boron vacancy spin defect is identified and a novel complex defect combination arising from carbon impurities is revealed. This complex defect, previously unreported, signifies a unique aspect of the material. In these findings, the understanding of defect‐induced optical properties in h‐BN films is contributed, providing insights for potential applications in quantum information science.
more »
« less
- Award ID(s):
- 2011876
- PAR ID:
- 10583849
- Publisher / Repository:
- Wiley-VCH
- Date Published:
- Journal Name:
- physica status solidi (RRL) – Rapid Research Letters
- Volume:
- 18
- Issue:
- 6
- ISSN:
- 1862-6254
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Hexagonal boron nitride (h-BN) has emerged as a promising platform for generating room temperature single photons exhibiting high brightness and spin-photon entanglement. However, improving emitter purity, stability, and scalability remains a challenge for quantum technologies. Here, we demonstrate highly pure and stable single-photon emitters (SPEs) in h-BN by directly growing carbon-doped, centimeter-scale h-BN thin films using the pulsed laser deposition (PLD) method. These SPEs exhibit room temperature operation with polarized emission, achieving ag(2)(0) value of 0.015, which is among the lowest reported for room temperature SPEs and the lowest achieved for h-BN SPEs. It also exhibits high brightness (~0.5 million counts per second), remarkable stability during continuous operation (>15 min), and a Debye-Waller factor of 45%. First-principles calculations reveal unique carbon defects responsible for these properties, enabled by PLD’s low-temperature synthesis and in situ doping. Our results demonstrate an effective method for large-scale production of high-purity, stable SPEs in h-BN, enabling robust quantum optical sources for various quantum applications.more » « less
-
Low‐Temperature Synthesis of Stable CaZn 2 P 2 Zintl Phosphide Thin Films as Candidate Top AbsorbersAbstract The development of tandem photovoltaics and photoelectrochemical solar cells requires new absorber materials with bandgaps in the range of ≈1.5–2.3 eV, for use in the top cell paired with a narrower‐gap bottom cell. An outstanding challenge is finding materials with suitable optoelectronic and defect properties, good operational stability, and synthesis conditions that preserve underlying device layers. This study demonstrates the Zintl phosphide compound CaZn2P2as a compelling candidate semiconductor for these applications. Phase‐pure, ≈500 nm‐thick CaZn2P2thin films are prepared using a scalable reactive sputter deposition process at growth temperatures as low as 100 °C, which is desirable for device integration. Ultraviolet‐visible spectroscopy shows that CaZn2P2films exhibit an optical absorptivity of ≈104 cm−1at ≈1.95 eV direct bandgap. Room‐temperature photoluminescence (PL) measurements show near‐band‐edge optical emission, and time‐resolved microwave conductivity (TRMC) measurements indicate a photoexcited carrier lifetime of ≈30 ns. CaZn2P2is highly stable in both ambient conditions and moisture, as evidenced by PL and TRMC measurements. Experimental data are supported by first‐principles calculations, which indicate the absence of low‐formation‐energy, deep intrinsic defects. Overall, this study shall motivate future work integrating this potential top cell absorber material into tandem solar cells.more » « less
-
Two-dimensional (2D) Janus Transition Metal Dichalcogenides (TMDs) have attracted much interest due to their exciting quantum properties arising from their unique two-faced structure, broken-mirror symmetry, and consequent colossal polarisation field within the monolayer. While efforts have been made to achieve high-quality Janus monolayers, the existing methods rely on highly energetic processes that introduce unwanted grain-boundary and point defects with still unexplored effects on the material's structural and excitonic properties Through High-resolution scanning transmission electron microscopy (HRSTEM), density functional theory (DFT), and optical spectroscopy measurements; this work introduces the most encountered and energetically stable point defects. It establishes their impact on the material's optical properties. HRSTEM studies show that the most energetically stable point defects are single (V_S and V_Se) and double chalcogen vacancy (V_S–V_Se), interstitial defects (Mi), and metal impurities (MW) and establish their structural characteristics. DFT further establishes their formation energies and related localized bands within the forbidden band. Cryogenic excitonic studies on h-BN-encapsulated Janus monolayers offer a clear correlation between these structural defects and observed emission features, which closely align with the results of the theory. The overall results introduce the defect genome of Janus TMDs as an essential guideline for assessing their structural quality and device properties.more » « less
-
Vacancy and substitution defects in boron nitrides display quantum emission properties promising for various technological applications in biosensing, imaging, telecommunications, and quantum optical computing. However, such atomic defects and their associated properties have thus far been limited to the ultraviolet and visible spectral range. In this work, we explored sp3-hybridized defect pairs in boron nitrides using density functional theory and found that optically active defect transitions can occur in the infrared with a high oscillator strength that is 6.5 times as high as that of boron nitride’s band gap transition. This phenomenon was observed in nanotubular and hexagonal boron nitrides, suggesting that these IR properties of sp3 defects can generally be found in boron nitrides.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1002/pssr.202400034
