skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Fabrication of hierarchical sapphire nanostructures using ultrafast laser induced morphology change
Abstract Sapphire is an attractive material that stands to benefit from surface functionalization effects stemming from micro/nanostructures. Here we investigate the use of ultrafast lasers for fabricating sapphire nanostructures by exploring the relationship between irradiation parameters, morphology change, and selective etching. In this approach a femtosecond laser pulse is focused on the substrate to change the crystalline morphology to amorphous or polycrystalline, which is characterized by examining different vibrational modes using Raman spectroscopy. The irradiated regions are removed using a subsequent hydrofluoric acid etch. Laser confocal measurements quantify the degree of selective etching. The results indicate a threshold laser pulse intensity required for selective etching. This process was used to fabricate hierarchical sapphire nanostructures over large areas with enhanced hydrophobicity, with an apparent contact angle of 140 degrees, and a high roll-off angle, characteristic of the rose petal effect. Additionally, the structures have high broadband diffuse transmittance of up to 81.8% with low loss, with applications in optical diffusers. Our findings provide new insights into the interplay between the light-matter interactions, where Raman shifts associated with different vibrational modes can predict selective etching. These results advance sapphire nanostructure fabrication, with applications in infrared optics, protective windows, and consumer electronics.  more » « less
Award ID(s):
2343526
PAR ID:
10585721
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Institute of Physics
Date Published:
Journal Name:
Nanotechnology
Volume:
36
Issue:
12
ISSN:
0957-4484
Page Range / eLocation ID:
125302
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Annual Review of Physical Chemistry)
    Goodson, Theodore; McCoy, Anne B (Ed.)
    Ultrafast excitation of nanoparticles can excite the acoustic vibrational modes of the structure that correlate with the expansion coordinates. These modes are frequently seen in transient absorption experiments on metal nanoparticle samples and occasionally for semiconductors. The aim of this review is to give an overview of the physical chemistry of nanostructure acoustic vibrations. The issues discussed include the excitation mechanism, how to calculate the mode frequencies using continuum mechanics, and the factors that control vibrational damping. Recent results that demonstrate that the high frequencies inherent to the acoustic modes of nanomaterials trigger a viscoelastic response in surrounding liquids are also discussed, as well as vibrational coupling between nanostructures and mode hybridization within the nanostructures. Mode hybridization provides a way of manipulating the lifetimes of the acoustic modes, which is potentially useful for applications such as mass sensing. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Molecules)
    We present a Raman spectroscopy study of the vibrational properties of free-base meso-tetra(4-pyridyl) porphyrin polycrystals under various temperature and hydrostatic pressure conditions. The combination of experimental results and Density Functional Theory (DFT) calculations allows us to assign most of the observed Raman bands. The modifications in the Raman spectra when excited with 488 nm and 532 nm laser lights indicate that a resonance effect in the Qy band is taking place. The pressure-dependent results show that the resonance conditions change with increasing pressure, probably due to the shift of the electronic transitions. The temperature-dependent results show that the relative intensities of the Raman modes change at low temperatures, while no frequency shifts are observed. The experimental and theoretical analysis presented here suggest that these molecules are well represented by the C2v point symmetry group. 
    more » « less
  3. ; ; ; ; ; ; (, APL Materials)
    We report the molecular beam epitaxy of Bi1−xSbx thin films (0 ≤ x ≤ 1) on sapphire (0001) substrates using a thin (Bi,Sb)2Te3 buffer layer. The characterization of the films using reflection high energy diffraction, x-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy reveals the epitaxial growth of films of reasonable structural quality. This is further confirmed via x-ray diffraction pole figures that determine the epitaxial registry between the thin film and the substrate. We further investigate the microscopic structure of thin films via Raman spectroscopy, demonstrating how the vibrational modes vary as the composition changes and discussing the implications for the crystal structure. We also characterize the samples using electrical transport measurements. 
    more » « less
  4. ; ; ; ; ; ; (, Nanoscale)
    We report here that dissolution and regrowth of resorcinol formaldehyde (RF) colloidal particles can occur spontaneously when they are subjected to etching in solvents such as ethanol and tetrahydrofuran, resulting in the formation of hollow nanostructures with controllable shell thickness. The hollowing process of the RF particles is attributed to their structural inhomogeneity, which results from the successive deposition of oligomers with different chain lengths during their initial growth. As the near-surface layer of RF colloids mainly consists of long-chain oligomers while the inner part consists of short-chain oligomers, selective etching removes the latter and produces the hollow structures. By revealing the important effects of the condensation degree of RF, the etching time and temperature, and the composition of solvents, we demonstrate that the morphology and structure of the resulting RF nanostructures can be conveniently and precisely controlled. This study not only improves our understanding of the structural heterogeneity of colloidal polymer particles, but also provides a practical and universal self-templated approach for the synthesis of hollow nanostructures. 
    more » « less
  5. ; ; ; ; (, Applied Physics Letters)
    MXenes have garnered significant attention for surface-enhanced Raman scattering (SERS) applications due to their exceptional electronic properties and remarkable hydrophilicity. However, niobium carbide (Nb2CTX), a notable member of the MXene family, has been underexplored for SERS applications. In this work, we present a comprehensive investigation of the SERS properties of Nb2CTx nanosheets, using methylene blue (MB) and crystal violet (CV) as probe molecules under laser excitations at 532 and 488 nm. The results revealed that the Raman enhancement of dye molecules on the Nb2CTx-based SERS substrate was determined by the interplay between laser energy and the probe molecule. The two orders of magnitude higher enhancement factor (EF) for MB (2.12 × 106) compared to CV (2.65 × 104) obtained using 532 nm laser excitation was attributed to a light-induced resonance charge transfer transition within the MB-Nb2CTX system. The distinctly different EF values for MB and CV suggest that SERS technology based on chemical mechanisms could enable selective molecular detection. Our results provide valuable insights into the SERS mechanism and contribute to the development of cost-effective and 2D MXene-based selective SERS substrates for molecular sensing applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email