An official website of the United States government
Abstract Siliceous slab-derived partial melts infiltrate the sub-arc mantle and cause rock-melt reactions, which govern the formation of diverse primary arc magmas and lithological heterogeneities. The effect of bulk water content, composition of reactants, and nature of melt infiltration (porous versus channelized) on the rock-melt reactions at sub-arc conditions have been investigated by previous studies. However, the effect of multiple episodes of rock-melt reactions in such scenarios has not been investigated before. Here, we explore mantle wedge modifications through serial additions of hydrous-silicic slab partial melts and whether such a process may ultimately explain the origin of high-Mg# andesites found in arcs worldwide. A series of piston-cylinder experiments simulate a serial addition of silicic slab melts in up to three stages (I through III) at 3 GPa and 800–1050°C, using rock-melt proportions of 75–25 and 50–50. A synthetic KLB-1 and a natural rhyolite (JR-1) represented the mantle and the slab components, respectively. Right from the first rock-melt interaction, the peridotite mantle transforms into olivine-free mica-rich pyroxenites ± amphibole ± quartz/coesite in equilibrium with rhyolitic-hydrous melts (72–80 wt% SiO2 and 40–90 Mg#). The formation of olivine-free pyroxenite seems to be controlled by complex functions of T, P, rock-melt ratio, wedge composition, and silica activity of the slab-melt. Remarkably, the pyroxenites approach a melt-buffered state with progressive stages of rock-melt reactions, where those rhyolitic melts inherit and preserve the major (alkalis, Fe, Mg, Ca) and trace element slab-signature. Our results demonstrate that lithological heterogeneities such as pyroxenites formed as products of rock-melt reactions in the sub-arc mantle may function as melt ‘enablers,’ implying that they may act as pathways that enable the infiltrating melt to retain their slab signature without undergoing modification. Moreover, the density contrast between the products of rock-melt reaction (melts and residues) and the average mantle wedge (~150 to 400 kg/m3) may help forming instabilities and diapiric rise of the slab components into the mantle wedge. However, the fate of the primitive slab-melts seems to be associated with the length of the pathway of mantle interaction which explains the evident wide magma spectrum as well as their degree of slab garnet-signature dilution. This work and the existence of high-Mg# Mexican-trondhjemites indicates that almost pristine slab-melts can make their way up to crustal levels and contribute to the arc magma diversity.
more »
« less
This content will become publicly available on March 19, 2026
Insights into the chemical evolution of sub-arc magmas from the high-pressure electrical conductivity of basaltic and andesitic magmas
The continental crust is rich in aluminosilicates and formed by the crystallization of arc magmas. However, the magma produced at sub-arc depths is often silica-poor. The chemical evolution of sub-arc magma from silica-poor to aluminosilicate-rich is perplexing. Magnetotelluric (MT) observations in subduction zones and complementary laboratory-based constraints of electrical conductivity (σ) are crucial to understanding this chemical evolution. The σ of a magma is sensitive to pressure (P), temperature (T), and chemistry (X). To date, laboratory-based measurements on the σ of silicate melts have helped to interpret MT observations at P ≤ 2 GPa. Yet, the melting in subduction zones could occur deeper, at P ≤ 6−7 GPa. The σ of melt at such pressures is poorly constrained. To address this, we performed experiments at P ≤ 6 GPa to examine the σ of basaltic to andesitic melts, which are common in subduction zones. We constrained the effects of silica, alumina, alkali, alkaline, and water (H2O) contents on the σ of melt. The activation volume of σ increases with silica contents. Hence, the σ of basaltic melt is overall greater than that of an andesitic counterpart. The σ of basaltic magma is also less sensitive to P than andesitic magma. Water lowers the activation energy and enhances σ for all melt compositions. Our results help constrain how the electrical properties of a magma change with an evolving composition in a subduction zone.
more »
« less
- Award ID(s):
- 2246802
- PAR ID:
- 10587510
- Publisher / Repository:
- Geological Society of America
- Date Published:
- Journal Name:
- Geology
- ISSN:
- 0091-7613
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The continental crust is produced by the solidification of aluminosilicate‐rich magmas which are sourced from deep below the surface. Migration of the magma depends on the density (ρ) contrast to source rocks and the melt viscosity (η). At the surface, these silica‐rich melts are typically sluggish due to highη > 1,000 Pa s. Yet at their source regions, the melt properties are complexly influenced by pressure (P), temperature (T), and water contents (). In this study, we examined the combinedP‐T‐ effects on the behavior of melts with an albite stoichiometry (NaAlSi3O8). We usedfirst‐principlesmolecular dynamics simulations to examine anhydrous (0 wt % H2O) and hydrous (5 wt % H2O) melts. To constrain thePandTeffects, we exploredP ≤ 25 GPa across several isotherms between 2500 and 4000 K. The melts show anomalousP‐ρrelationships at lowP ∼ 0 GPa and highT ≥ 2500 K, consistent with vaporization. At lithospheric conditions, meltρincreases with compression and is well described by a finite‐strain formalism. Water lowers the melt density (ρhydrous < ρanhydrous) but increases the compressibility, that is, 1/Khydrous>1/KanhydrousorKhydrous < Kanhydrous. We also find that the meltηdecreases with pressure and then increases with further compression. Water decreases the viscosity (ηhydrous < ηanhydrous) by depolymerizing the melt structure. The ionic self‐diffusivities are increased by the presence of water. The decreasedρandηby H2O increase the mobility of magma at crustal conditions, which could explain the rapid eruption and migration timescales for rhyolitic magmas as observed in the Chaitén volcano in Chile.more » « less
-
Abstract The porosity at which a magma becomes permeable (i.e., the percolation threshold;ϕc) is important for magma degassing; it is also poorly constrained in crystal‐bearing systems. To address this, we conduct high pressure‐temperature decompression experiments on water‐saturated rhyolitic melts with variable crystal contents. We find that crystal‐bearing run products become permeable at ~55‐vol.% vesicularity (crystal free), a value that is similar to that found in decompression‐crystallization experiments using basaltic andesite compositions. Our results provide insight into controls on the eruption styles of hydrous, crystal‐bearing magmas in general and controls on pulsatory Vulcanian behavior, in particular.more » « less
-
The origin of gaps or zoning in the composition of erupted products is critical to understanding how sub-volcanic reservoirs operate. We characterize the compositionally zoned magma that produced the 2053 ± 50 cal. yr BP Paso Puyehue Tephra from the Antillanca Volcanic Complex in the Andean Southern Volcanic Zone (SVZ). The 3.7 km3 Paso Puyehue Tephra is zoned from dacite (69 wt% SiO2) lapilli and ash comprising the lowermost 80% of the deposit that abruptly transitions upward into basaltic andesite scoria (54 wt% SiO2) making up the remaining ~20%. Variations in whole-rock, matrix glass, and mineral compositions through the deposit allow us to estimate pre-eruptive magma storage conditions and to develop a model of how this magma body was generated. Our findings suggest that amphibole-bearing basaltic andesitic magma stored at ~8.0 ± 1.3 km depth fractionally crystallized and cooled from 1048 ± 1.1 to 811 ± 28.6 ◦C under highly oxidizing conditions to produce silicic a melt that upon extraction and rise, pooled at ~6.4 ± 1.2 km depth at temperatures as low as 810 ◦C before eruption. MELTS models suggest that crystallization of a basaltic andesite parent magma with 4 wt% dissolved H2O can produce the dacite under conditions predicted by mineral thermobarometers with phase compositions comparable to those measured in minerals. Pervasive normal zoning at the rims of plagioclase crystals—most pronounced at the transition between dacite and basaltic andesite, and compatible vs. incompatible trace element concentrations, suggest that magma mixing was limited and likely occurred at the interface between the dacitic and basaltic andesitic magmas during ascent within the conduit upon eruption. Compositionally bimodal tephras are increasingly recognized throughout the SVZ with several interpreted to reflect basaltic recharge and mixing into extant rhyolitic reservoirs. In further contrast to other SVZ rhyolitic products, e.g., from the nearby Cord´on Callue and Mocho Choshuenco volcanoes, the Paso Puyehue magma was highly oxidized. This may reflect enhanced delivery of H2O from the subducting plate into the mantle wedge, which in turn may facilitate efficient extraction and separation of buoyant, low-viscosity rhyolitic melt from crystal-rich basaltic andesitic parent magmas and the co-eruption of both end members.more » « less
-
Abstract Many lines of evidence from high P–T experiments, thermodynamic models, and natural observations suggest that slab-derived aqueous fluids, which flux mantle wedges contain variable amounts of dissolved carbon. However, constraints on the effects of H2O–CO2 fluids on mantle melting, particularly at mantle wedge P–T conditions, are limited. Here, we present new piston cylinder experiments on fertile and depleted peridotite compositions with 3.5 wt.% H2O and XCO2 [= molar CO2 / (CO2 + H2O)] of 0.04–0.17. Experiments were performed at 2–3 GPa and 1350°C to assess how temperature, peridotite fertility, and XCO2 of slab-derived fluid affects partial melting in mantle wedges. All experiments produce olivine + orthopyroxene +7 to 41 wt.% partial melt. Our new data, along with previous lower temperature data, show that as mantle wedge temperature increases, primary melts become richer in SiO2, FeO*, and MgO and poorer CaO, Al2O3, and alkalis when influenced by H2O–CO2 fluids. At constant P–T and bulk H2O content, the extent of melting in the mantle wedge is largely controlled by peridotite fertility and XCO2 of slab-fluid. High XCO2 depleted compositions generate ~7 wt.% melt, whereas, at identical P–T, low XCO2 fertile compositions generate ~30 to 40 wt.% melt. Additionally, peridotite fertility and XCO2 have significant effects on peridotite partial melt compositions. At a constant P–T–XCO2, fertile peridotites generate melts richer in CaO and Al2O3 and poorer in SiO2, MgO + FeO, and alkalis. Similar to previous experimental studies, at a constant P–T fertility condition, as XCO2 increases, SiO2 and CaO of melts systematically decrease and increase, respectively. Such distinctive effects of oxidized form of dissolved carbon on peridotite partial melt compositions are not observed if the carbon-bearing fluid is reduced, such as CH4-bearing. Considering the large effect of XCO2 on melt SiO2 and CaO concentrations and the relatively oxidized nature of arc magmas, we compare the SiO2/CaO of our experimental melts and melts from previous peridotite + H2O ± CO2 studies to the SiO2/CaO systematics of primitive arc basalts and ultra-calcic, silica-undersaturated arc melt inclusions. From this comparison, we demonstrate that across most P–T–fertility conditions predicted for mantle wedges, partial melts from bulk compositions with XCO2 ≥ 0.11 have lower SiO2/CaO than all primitive arc melts found globally, even when correcting for olivine fractionation, whereas partial melts from bulk compositions with XCO2 = 0.04 overlap the lower end of the SiO2/CaO field defined by natural data. These results suggest that the upper XCO2 limit of slab-fluids influencing primary arc magma formation is 0.04 < XCO2 < 0.11, and this upper limit is likely to apply globally. Lastly, we show that the anomalous SiO2/CaO and CaO/Al2O3 signatures observed in ultra-calcic arc melt inclusions can be reproduced by partial melting of either CO2-bearing hydrous fertile and depleted peridotites with 0 < XCO2 < 0.11 at 2–3 GPa, or from nominally CO2-free hydrous fertile peridotites at P > 3 GPa.more » « less
