An official website of the United States government
Abstract Liquid crystalline elastomers (LCEs) that retain the cholesteric phase (CLCEs) are soft, polymeric materials that retain periodic structure and exhibit a selective reflection. While prior studies have examined thermochromism in CLCEs, the association of temperature change and reflection wavelength shift has been limited to 1.4 nm °C−1. Here, CLCEs with intra‐mesogenic supramolecular bonds are prepared to enhance tunability as well triple the rate (e.g., 4.8 nm °C−1). Specifically, these materials incorporate liquid crystalline monomers based on dimerized oxy‐benzoic acid (OBA) derivatives. Increasing the concentration of the OBA comonomers increases the magnitude of red‐shifting thermochromism of the selective reflection. At and above a threshold concentration, the selective reflection in the CLCEs can disappear upon heating, analogous to on‐off “switching.” Further, the introduction of the supramolecular bonds within the CLCE enable mechanical programming and enhanced one‐time tunable thermochromism via a one‐way shape memory process. Accordingly, this research could enable functional use in low temperature sensitive optical elements, fail‐safe thermal indicators for food packaging, and smart window coatings.
more »
« less
Should I stay or should I flow? An exploration of phase‐separated metallosupramolecular liquid crystal polymers
Abstract Dynamic liquid crystalline polymers (dLCPs) incorporate both liquid crystalline mesogens and dynamic bonds into a single polymeric material. These dual functionalities impart order‐dependent thermo‐responsive mechano‐optical properties and enhanced reprocessability/programmability enabling their use as soft actuators, adaptive adhesives, and damping materials. While many previous works studying dynamic LCPs utilize dynamic covalent bonds, metallosupramolecular bonds provide a modular platform where a series of materials can be accessed from a single polymeric feedstock through the variation of the metal ion used. A series of dLCPs were prepared by the addition of metal salts to a telechelic 2,6‐bisbenzimidazolylpyridine (Bip) ligand endcapped LCP to form metallosupramolecular liquid crystal polymers (MSLCPs). The resulting MSLCPs were found to phase separate into hard and soft phases which aids in their mechanical robustness. Variations of the metal salts used to access these materials allowed for control of the thermomechanical, viscoelastic, and adhesive properties with relaxations that can be tailored independently of the mesogenic transition. This work demonstrates that by accessing phase separation through the incorporation of metallosupramolecular moieties, highly processable yet robust MSLCP materials can be realized. This class of materials opens the door to LCPs with bulk flow behavior that can also be utilized as multi‐level adhesives.
more »
« less
- PAR ID:
- 10590195
- Publisher / Repository:
- Wiley
- Date Published:
- Journal Name:
- Chemistry – A European Journal
- Volume:
- 31
- Issue:
- 25
- ISSN:
- 0947-6539
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Chemically crosslinked elastomers are a class of polymeric materials with properties that render them useful as adhesives, sealants, and in other engineering applications. Poly(γ-methyl-ε-caprolactone) (PγMCL) is a hydrolytically degradable and compostable aliphatic polyester that can be biosourced and exhibits competitive mechanical properties to traditional elastomers when chemically crosslinked. A typical limitation of chemically crosslinked elastomers is that they cannot be reprocessed; however, the incorporation of dynamic covalent bonds can allow for bonds to reversibly break and reform under an external stimulus, usually heat. In this work, we study the dynamic behavior and mechanical properties of PγMCL elastomers synthesized from aliphatic dianhydride crosslinkers. The crosslinked elastomers in this work were synthesized using the commercially available crosslinkers, 1,2,4,5-cyclohexanetetracarboxylic dianhydride, and 1,2,3,4-cyclobutanetetracarboxylic dianhydride and three-arm hydroxy-telechelic PγMCL star polymers. Stress relaxation experiments on the crosslinked networks showed an Arrhenius dependence of viscosity with temperature with an activation energy of 118 ± 8 kJ/mol, which agrees well with the activation energy of transesterification exchange chemistry obtained from small molecule model studies. Dynamic mechanical thermal analysis and rheological experiments confirmed the dynamic nature of the networks and provided insight into the mechanism of exchange (i.e., associative or dissociative). Tensile testing showed that these materials can exhibit high strains at break and low Young’s moduli, characteristic of soft and strong elastomers. By controlling the exchange chemistry and understanding the effect of macromolecular structure on mechanical properties, we prepared the high-performance elastomers that can be potentially reprocessed at moderately elevated temperatures.more » « less
-
Abstract Dynamic liquid crystal elastomers (LCEs) are a class of polymer networks characterized by the inclusion of both liquid crystalline monomers and dynamic covalent bonds. The unique properties realized through the combination of these moieties has produced a plethora of stimuli‐responsive materials to address a range of emerging technologies. While previous works have studied the incorporation of different dynamic bonds in LCEs, few (if any) have studied the effect of the specific placement of the dynamic bonds within an LCE network. A series of dynamic LCE networks were synthesized using a generalizable approach that employs a tandem thiol‐ene/yne chemistry which allows the location of the dynamic disulfide bond to be varied while maintaining similar network characteristics. When probing these systems in the LC regime, the thermomechanical properties were found to be largely similar. It is not until elevated temperatures (160–180 °C) that differences in the relaxation activation energies of these systems begin to materialize based solely on differences in placement of the dynamic bond throughout the network. This work demonstrates that through intentional dynamic bond placement, stress relaxation times can be tuned without affecting the LCE character. This insight can help optimize future dynamic LCE designs and achieve shorter processing times.more » « less
-
Abstract Naturally occurring polymeric structures often consist of 1D polymer chains intricately folded and entwined through non‐covalent bonds, adopting precise topologies crucial for their functionality. The exploration of crystalline 1D polymers through dynamic covalent chemistry (DCvC) and supramolecular interactions represents a novel approach for developing crystalline polymers. This study shows that sub‐angstrom differences in the counter‐ion size can lead to various helical covalent polymer (HCP) topologies, including a novel metal‐coordination HCP (m‐HCP) motif. Single‐crystal X‐ray diffraction (SCXRD) analysis of HCP−Na revealed that double helical pairs are formed by sodium ions coordinating to spiroborate linkages to form rectangular pores. The double helices are interpenetrated by the unreacted diols coordinating sodium ions. The reticulation of the m‐HCP structure was demonstrated by the successful synthesis of HCP−K. Finally, ion‐exchange studies were conducted to show the interconversion between HCP structures. This research illustrates how seemingly simple modifications, such as changes in counter‐ion size, can significantly influence the polymer topology and determine which supramolecular interactions dominate the crystal lattice.more » « less
-
Metal-ion-containing soft materials include metallogels, metal-organic frameworks, and coordination polymers. These materials show commercial value in catalysis, hydrogen storage, and electronics. Metal-containing soft materials reported to date are structurally weak, falling short of a Young’s modulus typical of engineering-grade materials. We report herein that inclusion of an antisolvent in metal-thiolate metallogel synthesis results in a colloidal sol, where the colloids comprise amorphous metal-organic complexes. Upon desolvation, the colloids coalesce to form a solid phase that is both gel like and glass like. This solid phase is structurally amorphous, comprises continuous networks similar to organic polymers, and has stiffness observed in polymeric materials with extended structure, yet contains a superstoichiometric amount of metal relative to organic ligand. The solid phase is therefore a rigid, amorphous metal-rich (RAMETRIC) material. Highlighting the rigidity, the Young’s modulus of the gel-phase material is 1,000× greater than metallogels comprised of the same constituent building blocks.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1002/chem.202404672
