An official website of the United States government
This content will become publicly available on February 1, 2026
Quantifying steric, non-steric, and adsorption contributions to solute rejection in covalent organic framework nanofiltration membranes
Solute transport in nanofiltration (NF) membrane systems is described with the Donnan Steric Pore Model with Dielectric Exclusion (DSPM-DE), which couples size- and charge-based solute partitioning mechanisms into and out of the membrane pores with flow through the pore, as described by the Extended Nernst-Planck equation. If membrane structural and chemical characteristics are well defined, the DSPM-DE can theoretically be used to identify solute rejection mechanisms, predict NF performance, and guide membrane design. However, the presence of additional separation mechanisms, like adsorption, and the heterogeneous, convoluted characteristics of traditional NF membranes challenge these goals. In this work, we apply covalent organic frameworks (COFs) as model NF materials to demonstrate control over the steric and non-steric partitioning and transport mechanisms in NF. We experimentally isolate and quantify the steric and non-steric contributions to solute partitioning and transport in NF via application of the DSPM-DE to COF membranes fabricated with tailored pore sizes, thicknesses, and charge properties. We also demonstrate enhanced non-steric solute rejection achieved through changes to COF membrane structure and chemistry, and we highlight the significant impact of adsorption on measured solute rejection by COF membranes.
more »
« less
- Award ID(s):
- 2046453
- PAR ID:
- 10595981
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Journal of Membrane Science
- Volume:
- 715
- Issue:
- C
- ISSN:
- 0376-7388
- Page Range / eLocation ID:
- 123491
- Subject(s) / Keyword(s):
- Nanofiltration Membranes Covalent organic frameworks Adsorption Transport modeling
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are now widely found in aquatic ecosystems, including sources of drinking water and portable water, due to their increasing prevalence. Among different PFAS treatment or separation technologies, nanofiltration (NF) and reverse osmosis (RO) both yield high rejection efficiencies (>95%) of diverse PFAS in water; however, both technologies are affected by many intrinsic and extrinsic factors. This study evaluated the rejection of PFAS of different carbon chain length (e.g., PFOA and PFBA) by two commercial RO and NF membranes under different operational conditions (e.g., applied pressure and initial PFAS concentration) and feed solution matrixes, such as pH (4–10), salinity (0‐ to 1000‐mM NaCl), and organic matters (0–10 mM). We further performed principal component analysis (PCA) to demonstrate the interrelationships of molecular weight (213–499 g·mol−1), membrane characteristics (RO or NF), feed water matrices, and operational conditions on PFAS rejection. Our results confirmed that size exclusion is a primary mechanism of PFAS rejection by RO and NF, as well as the fact that electrostatic interactions are important when PFAS molecules have sizes less than the NF membrane pores. Practitioner PointsTwo commercial RO and NF membranes were both evaluated to remove 10 different PFAS.High transmembrane pressures facilitated permeate recovery and PFAS rejection by RO.Electrostatic repulsion and pore size exclusion are dominant rejection mechanisms for PFAS removal.pH, ionic strength, and organic matters affected PFAS rejection.Mechanisms of PFAS rejection with RO/NF membranes were explained by PCA analysis.more » « less
-
Abstract There is a need for developing reliable models for water and solute transport in graphene oxide (GO) membranes for advancing their emerging industrial water processing applications. In this direction, we develop predictive transport models for GO and reduced‐GO (rGO) membranes over a wide solute concentration range (0.01–0.5 M) and compositions, based on the extended Nernst–Planck transport equations, Donnan equilibrium condition, and solute adsorption models. Some model parameters are obtained by fitting experimental permeation data for water and unary (single‐component) aqueous solutions. The model is validated by predicting experimental permeation behavior in binary solutions, which display very different characteristics. Sensitivity analysis of salt rejections as a function of membrane design parameters (pore size and membrane charge density) allows us to infer design targets to achieve high salt rejections. Such models will be useful in accelerating structure‐separation property relationships of GO membranes and for separation process design and optimization.more » « less
-
Abstract Considering growing efforts to understand and improve the solute-specific selectivity of nanofiltration (NF) membranes, we explored the ion-specific effects that govern the charge and performance of a loose polyamide NF membrane that is commonly used for solute-solute separations. Specifically, we systematically evaluated the zeta potential of the membrane under different conditions of pH, salinity, and ionic composition, and correlated the obtained data with membrane performance tested under similar conditions. Our results identify the pKaof both carboxylic and amine groups bonded to the membrane surface and suggest that the highly polarizable chloride anions in the solution adsorb to the polyamide, increasing its negative charge. We also show that monovalent cations of different “stickiness” can neutralize the negative membrane charge to different extents due to their varying tendency to sorb to the polymer matrix or screen the fixed carboxyl groups on the membrane surface. Notably, our correlation between zeta potential measurements and permeability experiments indicates the substantial contribution of solution ions to Donnan exclusion in NF membranes.more » « less
-
Abstract Separating molecules or ions with sub-Angstrom scale precision is important but technically challenging. Achieving such a precise separation using membranes requires Angstrom scale pores with a high level of pore size uniformity. Herein, we demonstrate that precise solute-solute separation can be achieved using polyamide membranes formed via surfactant-assembly regulated interfacial polymerization (SARIP). The dynamic, self-assembled network of surfactants facilitates faster and more homogeneous diffusion of amine monomers across the water/hexane interface during interfacial polymerization, thereby forming a polyamide active layer with more uniform sub-nanometre pores compared to those formed via conventional interfacial polymerization. The polyamide membrane formed by SARIP exhibits highly size-dependent sieving of solutes, yielding a step-wise transition from low rejection to near-perfect rejection over a solute size range smaller than half Angstrom. SARIP represents an approach for the scalable fabrication of ultra-selective membranes with uniform nanopores for precise separation of ions and small solutes.more » « less
