An official website of the United States government
Centrifugal pendulum vibration absorbers (CPVAs) are essentially collections of pendulums attached to a rotor or rotating component or components within a mechanical system for the purpose of mitigating the typical torsional surging that is inherent to internal combustion engines and electric motors. The dynamic stability and performance of CPVAs are highly dependent on the motion path defined for their pendulous masses. Assemblies of absorbers are tuned by adjusting these paths such that the pendulums respond to problematic orders (multiples of average rotation speed) in a way that smooths the rotational accelerations arising from combustion or other non-uniform rotational acceleration events. For most motion paths, pendulum tuning indeed shifts as a function of the pendulum response amplitude. For a given motion path, the tuning shift that occurs as pendulum amplitude varies produces potentially undesirable dynamic instabilities. Large amplitude pendulum motion that mitigates a high percentage of torsional oscillation while avoiding instabilities brought on by tuning shift introduces complexity and hazards into CPVA design processes. Therefore, identifying pendulum paths whose tuning order does not shift as the pendulum amplitude varies, so-called tautochronic paths, may greatly simplify engineering design processes for generating high-performing CPVAs. This paper expands on the work of Sabatini, in which a mathematical condition for tautochronicity is identified for a class of differential equations that includes those that arise in the modeling of the motion of a pendulum in a centrifugal field. The approach is based on a transformation from the physical coordinate to a standard Hamiltonian system. We show that transforming a nonlinear oscillator made tautochronic through path modification actually transforms the nonlinear oscillator into a simple harmonic oscillator. To illustrate the new approach and results, the technique is applied to the simplified problem of determining the cut-out shape that produces tautochronic motion for a mass sliding in the cut-out of a larger mass that is free to translate horizontally without friction. In the simplified problem, centrifugal acceleration is replaced by constant gravitational acceleration and rotation of the rotor inertia is replaced by the translation of the large base mass.
more »
« less
This content will become publicly available on December 1, 2025
System Tautochronic Path for Pendulum Vibration Absorber Based on Simple Harmonic Oscillator Transformation
Centrifugal pendulum vibration absorbers (CPVAs) are essentially collections of pendulums attached to a rotor or rotating component or components within a mechanical system for the purpose of mitigating the typical torsional surging that is inherent to internal combustion engines and electric motors. The dynamic stability and performance of CPVAs are highly dependent on the motion path defined for their pendulous masses. Assemblies of absorbers are tuned by adjusting these paths such that the pendulums respond to problematic orders (multiples of average rotation speed) in a way that smooths the rotational accelerations arising from combustion or other nonuniform rotational acceleration events. For most motion paths, pendulum tuning indeed shifts as a function of the pendulum response amplitude. For a given motion path, the tuning shift that occurs as pendulum amplitude varies produces potentially undesirable dynamic instabilities. Large amplitude pendulum motion that mitigates a high percentage of torsional oscillation while avoiding instabilities brought on by tuning shift introduces complexity and hazards into CPVA design processes. Therefore, identifying pendulum paths whose tuning order does not shift as the pendulum amplitude varies, so-called tautochronic paths, may greatly simplify engineering design processes for generating high-performing CPVAs. To illustrate this new approach and results, a tautochronic cut-out shape producing constant period system motion is obtained for a simplified problem involving a mass sliding in the cut-out of a larger mass that is free to translate horizontally without friction in a constant gravitational field, where the translating base mass replaces the rotating rotor in the centrifugal field.
more »
« less
- Award ID(s):
- 2347632
- PAR ID:
- 10596973
- Publisher / Repository:
- ASME Journal of Vibration and Acoustics
- Date Published:
- Journal Name:
- Journal of Vibration and Acoustics
- Volume:
- 146
- Issue:
- 6
- ISSN:
- 1048-9002
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Centrifugal pendulum vibration absorbers (CPVAs) are passive devices and a proven technology for reducing torsional vibrations in rotating systems, including helicopter rotors and crankshafts of internal combustion engines. CPVAs consist of pendulums mounted on a rotor, driven by system rotation, and tuned to counteract engine-order fluctuating torques acting on the rotor, thereby smoothing vibrations. In this study, a unifilar CPVA configuration is proposed to address torsional vibrations in electric machines (EMs). A principal challenge in this application is the high-orders of torsional vibration inherent in current EM operation. As order increases, the path radius of curvature that the absorber mass is required to follow (for proper tuning) diminishes, which presents machining challenges. A dynamic model for a unifilar CPVA is developed and then linearized to compute the tuning orders of the system. A quadratic formula is derived whose roots govern the two natural orders of the system and initial results show a desirable large separation between these orders in a prototype design. The developed model will facilitate future simulation studies of the system forced vibration response to characterize the stability and vibration control performance of this design.more » « less
-
null (Ed.)Abstract This article describes the effects of gravity on the response of systems of identical, cyclically arranged, centrifugal pendulum vibration absorbers (CPVAs) fitted to a rotor spinning about a vertical axis. CPVAs are passive devices composed of movable masses suspended on a rotor, suspended such that they reduce torsional vibrations at a given engine order. Gravitational effects acting on the absorbers can be important for systems spinning at relatively low rotation speeds, for example, during engine idle conditions. The main goal of this study is to predict the response of a CPVA/rotor system in the presence of gravity. A linearized model that includes the effects of gravity and an order n torque acting on the rotor is analyzed by exploiting the cyclic symmetry of the system. The results show that a system of N absorbers responds in one or more groups, where the absorbers in each group have identical waveforms but shifted phases. The nature of the waveforms can have a limiting effect on the absorber operating envelope. The number of groups is shown to depend on the engine order n and the ratio N/n. It is also shown that there are special resonant effects if the engine order is n = 1 or n = 2, the latter of which is particularly important in applications. In these cases, the response of the absorbers has a complicated dependence on the relative levels of the applied torque and gravity. In addition, it is shown that for N > 1, the rotor response is not affected by gravity, at least to leading order, due to the cyclic symmetry of the gravity effects. The linear model and the attendant analytical predictions are verified by numerical simulations of the full nonlinear equations of motion.more » « less
-
As seen by an observer in the rotating frame, the earth’s small spheroidal deformations neutralize the centrifugal force, leaving only the smaller Coriolis force to govern the “inertial” motion of objects that move on its surface, assumed smooth and frictionless. Previous studies of inertial motion employ weakly spheroidal equations of motion that ignore the influence of the centrifugal force and yet treat the earth as a sphere. The latitude dependence of these equations renders them strongly nonlinear. We derive and justify these equations and use them to identify, classify, name, describe, and illustrate all possible classes of inertial motion, including a new class of motion called circumpolar waves, which encircle both poles during each cycle of the motion. We illustrate these classes using CorioVis, our freely available Coriolis visualization software. We identify a rotational/time-reversal symmetry for motion on the earth’s surface and use this symmetry to develop and validate closed-form small-amplitude approximations for the four main classes and one degenerate class of inertial motion. For these five classes, we supply calculations of experimentally relevant frequencies, zonal drifts, and latitude ranges.more » « less
-
An experimental campaign was conducted to study dynamic ice accretion on rotating aeroengine fan blades and evaluate the icing-induced performance degradation to the fan rotor. The experiments were performed in an icing research tunnel with a scaled spinner-fan model exposed to typical dry rime and wet glaze icing conditions. Although the accreted ice layers were found to conform well with the shapes of the fan blades under the rime icing condition, the performance of the fan rotor was found to degrade substantially due to the much rougher blade surfaces, causing up to 60% reduction in the pressure increment after 360 s of the rime icing experiment. More complicated, needlelike icicles were found to grow rapidly over the rotating spinner and fan blades under the glaze icing condition due to the combined effects of the aerodynamic forces and the centrifugal forces associated with the rotation motion. The irregular-shaped glaze ice structures were found to induce tremendous detrimental effects on the fan rotor, making the airflow depressurized, instead of pressurized, after passing the iced fan rotor. The iced spinner-fan model was always found to consume more power, regardless of rime or glaze ice structures accreted on the fan blades.more » « less
