An official website of the United States government
The inherent existence of multi phases in iron oxide nanostructures highlights the significance of them being investigated deliberately to understand and possibly control the phases. Here, the effects of annealing at 250 °C with a variable duration on the bulk magnetic and structural properties of high aspect ratio biphase iron oxide nanorods with ferrimagnetic Fe3O4 and antiferromagnetic α-Fe2O3 are explored. Increasing annealing time under a free flow of oxygen enhanced the α-Fe2O3 volume fraction and improved the crystallinity of the Fe3O4 phase, identified in changes in the magnetization as a function of annealing time. A critical annealing time of approximately 3 h maximized the presence of both phases, as observed via an enhancement in the magnetization and an interfacial pinning effect. This is attributed to disordered spins separating the magnetically distinct phases which tend to align with the application of a magnetic field at high temperatures. The increased antiferromagnetic phase can be distinguished due to the field-induced metamagnetic transitions observed in structures annealed for more than 3 h and was especially prominent in the 9 h annealed sample. Our controlled study in determining the changes in volume fractions with annealing time will enable precise control over phase tunability in iron oxide nanorods, allowing custom-made phase volume fractions in different applications ranging from spintronics to biomedical applications.
more »
« less
Characterization of carbon-coated core-shell iron nanoparticles annealed by oxygen and nitrogen
Nanocomposites consisting of nanoparticles of iron oxide (Fe3O4) and iron carbide (Fe3C) with a core-shell structure (Fe core, Fe3O4 and/or Fe3C shells) coated with additional graphite-like carbon layer dispersed in carbon matrix have been synthesized by solid-phase pyrolysis of iron-phthalocyanine (FePc) and iron-porphyrin (FePr) with a pyrolysis temperature of 900°C, and post-annealing conducted at temperatures ranging from 150°C to 550°C under controlled oxygen- and/or nitrogen-rich environments. A comprehensive analysis of the samples’ morphology, composition, structure, size, and magnetic characteristics was performed by utilizing scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-STEM) with elemental mapping, X-ray diffraction analysis (XRD), and magnetic measurements by utilizing vibrating sample magnetometry (VSM). The effect of the annealing process on magnetic performance and efficient control of the hysteresis loop and specific absorption rate (SAR) are discussed.
more »
« less
- Award ID(s):
- 2112554
- PAR ID:
- 10597238
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- AIP Advances
- Volume:
- 14
- Issue:
- 2
- ISSN:
- 2158-3226
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Nanoparticle additives increase the thermal conductivity of conventional heat transfer fluids at low concentrations, which leads to improved heat transfer fluids and processes. This study investigates lignin-coated magnetic nanocomposites (lignin@Fe3O4) as a novel bio-based magnetic nanoparticle additive to enhance the thermal conductivity of aqueous-based fluids. Kraft lignin was used to encapsulate the Fe3O4 nanoparticles to prevent agglomeration and oxidation of the magnetic nanoparticles. Lignin@Fe3O4 nanoparticles were prepared using a pH-driven co-precipitation method with a 3:1 lignin to magnetite ratio and characterized by X-ray diffraction, FT-IR, thermogravimetric analysis, and transmission electron microscopy. The magnetic properties were characterized using a vibrating sample magnetometer. Once fully characterized, lignin@Fe3O4 nanoparticles were dispersed in aqueous 0.1% w/v agar–water solutions at five different concentrations, from 0.001% w/v to 0.005% w/v. Thermal conductivity measurements were performed using the transient line heat source method at various temperatures. A maximum enhancement of 10% in thermal conductivity was achieved after adding 0.005% w/v lignin@Fe3O4 to the agar-based aqueous suspension at 45 °C. At room temperature (25 °C), the thermal conductivity of lignin@Fe3O4 and uncoated Fe3O4 agar-based suspensions was characterized at varying magnetic fields from 0 to 0.04 T, which were generated using a permanent magnet. For this analysis, the thermal conductivity of lignin magnetic nanosuspensions initially increased, showing a 5% maximum peak increase after applying a 0.02 T magnetic field, followed by a decreasing thermal conductivity at higher magnetic fields up to 0.04 T. This result is attributed to induced magnetic nanoparticle aggregation under external applied magnetic fields. Overall, this work demonstrates that lignin-coated Fe3O4 nanosuspension at low concentrations slightly increases the thermal conductivity of agar aqueous-based solutions, using a simple permanent magnet at room temperature or by adjusting temperature without any externally applied magnetic field.more » « less
-
Tailoring the magnetic properties of iron oxide nanosystems is essential to expanding their biomedical applications. In this study, 34 nm iron oxide nanocubes with two phases consisting of Fe3O4 and α-Fe2O3 were annealed for 2 h in the presence of O2, N2, He, and Ar to tune the respective phase volume fractions and control their magnetic properties. X-ray diffraction and magnetic measurements were carried out post-treatment to evaluate changes in the treated samples compared to the as-prepared samples, showing an enhancement of the α-Fe2O3 phase in the samples annealed with O2 while the others indicated a Fe3O4 enhancement. Furthermore, the latter samples indicated enhancements in crystallinity and saturation magnetization, while coercivity enhancements were the most significant in samples annealed with O2, resulting in the highest specific absorption rates (of up to 1000 W/g) in all the applied fields of 800, 600, and 400 Oe in agar during magnetic hyperthermia measurements. The general enhancement of the specific absorption rate post-annealing underscores the importance of the annealing atmosphere in the enhancement of the magnetic and structural properties of nanostructures.more » « less
-
Nickel-Fe3O4 nanoparticles supported on multi-walled carbon nanotubes (Ni-Fe3O4/MWCNTs) were synthesized by mechanical grinding of a sample of nickel salt, Fe3O4 and MWCNTs using a ball-mill mixer. The preparation method allows for bulk production of Ni-Fe3O4 nanoparticles at room temperature without the necessity of any solvent or chemical reagent. The nanoparticles prepared by this method exhibit small particles size of 5–8 nm with uniform dispersion of nickel nanoparticles on the surface of multi-walled carbon nanotubes. The Ni-Fe3O4/MWCNTs demonstrated remarkable catalytic activity for Suzuki cross coupling reactions of functionalized aryl halides and phenylboronic acids with excellent turnover number and turnover frequency (e.g., 76,000 h−1) using Monowave 50 conventional heating reactor at 120 °C within a very short reaction time of 15 min. The catalyst is air-stable and exhibits easy removal from the reaction mixture due to its magnetic properties, recyclability with no loss of activity, and significantly better performance than the other well-known commercial nickel catalyst. The Ni-Fe3O4/MWCNTs nanoparticles were fully characterized by a variety of spectroscopic techniques including X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and X-ray Photoelectron Spectroscopy (XPS). Since nickel offers similar properties to other more expensive transition metals including the most widely used palladium counterpart in cross coupling catalysis, this work demonstrates a promising lower-cost, air-moisture stable and efficient alternative catalyst based on nickel nanoparticles for cross coupling reactions.more » « less
-
Magnetic elastomers with hard or permanent magnetic particulate are able to achieve complex motion not possible from soft magnetic elastomers. Magnetic annealing and fused deposition modeling (FDM) have been used to increase the performance of magnetic composites. This research explores how the magnetoactive properties of hard magnetic elastomers are influenced by magnetic annealing and the addition of the soft magnetic particulate. Three compositions of the thermoplastic magnetic elastomer composite are explored: 15 vol. % SrFe12O19, 10 vol. % SrFe12O19/5 vol. % carbonyl iron, and 5 vol. % SrFe12O19/10 vol. % carbonyl iron. The material is then extruded into FDM filaments. During the extrusion process, some filament is magnetically annealed in an axial applied field. Magnetic hysteresis loops show that the saturation magnetization and coercivity change based on the relative amount of hard and soft magnetic particulate. The presence of only one coercive field indicates magnetic coupling between the hard and soft components. Magnetoactive testing measures each sample’s mechanical deflection angle as a function of transverse applied magnetic field strength. Qualitative and quantitative results reveal that magnetic annealing is critical to the magnetoactive performance of the hard magnetic elastomers. The results also demonstrate that magnetic annealing and increased carbonyl iron both improve the magnetoactive deflection angle for a given applied field. Scanning electron microscopy shows a stratification effect in a range of the filaments. Understanding these hard magnetic elastomers provides insight into how performance can be controlled and optimized by magnetic annealing and combining hard and soft magnetic particulate.more » « less
