skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Young’s modulus of V3O5 thin films
Vanadium oxide V3O5 exhibits an insulator-to-metal transition (IMT) near 430 K, which is the highest value for all vanadium oxides exhibiting IMTs. This makes it interesting for advanced electronic applications. However, the properties of V3O5 have been little studied, and, in particular, there are no reports of experimentally determined mechanical properties. In this work, Young’s modulus of sputter-deposited V3O5 thin films has been determined by measuring the fundamental resonant frequency of V3O5-coated silicon microcantilevers using a laser beam deflection technique. After deposition, the films were characterized by x-ray diffraction, resistivity measurements, and atomic force microscopy. The value of Young’s modulus experimentally determined for V3O5 was 198 ± 14 GPa, which is slightly lower than the computationally derived values for bulk crystal V3O5.  more » « less
Award ID(s):
2033328
PAR ID:
10597312
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
American Institute of Physics
Date Published:
Journal Name:
AIP Advances
Volume:
13
Issue:
8
ISSN:
2158-3226
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, ACS Applied Polymer Materials)
    Kirk S. Schanze, editor-in-chief (Ed.)
    Nanoindentation is an optimal technique for the measurement of thin film mechanical properties. Polymers present a unique problem in that their response to loading is time-dependent. Due to this, many of the most common nanoindentation methods are not suitable for probing polymer nanoscale properties. Despite this issue being well-known for decades, poly(3-hexylthiophene) has been exclusively analyzed by time-independent mechanical properties testing methods. Herein, we present a nanoindentation technique that analyzes the materials’ time-dependent response under both constant rate loading and step loading. By determining viscoelastic functions, we are able to extract the Young’s relaxation modulus of poly(3- hexylthiophene). The average Young’s modulus acquired from viscoelastic nanoindentation is determined to be 260 ± 27 MPa. These results are in excellent agreement with specialized mechanical tests for thin 
    more » « less
  2. ; ; ; ; ; (, Polymer)
    Solution processing techniques are often used to enhance intra and interchain order in semiconducting conjugated polymer thin films used in the active layer of organic optoelectronic devices. We investigate the nanomechanical properties of conjugated polymer thin films arising from solution processing techniques. We find that Young’s Modulus data measured by AM-FM AFM can detect additional changes in film properties not discernible by other commonly used bulk thin-film characterization techniques. For PBDB-T-SF, we detect an increase in molecular order that is not noticable by UV–visible absorption spectroscopy, X-ray diffraction or nanoindentation. PCDTBT, the most amorphous of the polymers studied, shows no changes in absorption or X-ray diffraction data, yet clear changes in Young’s Modulus were detected by AFM. Our study demonstrates the applicability of nanomechanical measurements for characterizing local structural variations in conjugated polymer films. This work is relevant to ongoing efforts to control and understand the complex structure-property-processing relationships of conjugated polymer thin films. 
    more » « less
  3. ; ; ; ; (, Mechanics of Time-Dependent Materials)
    Debonding at the core–skin interphase region is one of the primary failure modes in core sandwich composites under shear loads. As a result, the ability to characterize the mechanical properties at the interphase region between the composite skin and core is critical for design analysis. This work intends to use nanoindentation to characterize the viscoelastic properties at the interphase region, which can potentially have mechanical properties changing from the composite skin to the core. A sandwich composite using a polyvinyl chloride foam core covered with glass fiber/resin composite skins was prepared by vacuum-assisted resin transfer molding. Nanoindentation at an array of sites was made by a Berkovich nanoindenter tip. The recorded nanoindentation load and depth as a function of time were analyzed using viscoelastic analysis. Results are reported for the shear creep compliance and Young’s relaxation modulus at various locations of the interphase region. The change of viscoelastic properties from higher values close to the fiber composite skin region to the smaller values close to the foam core was captured. The Young’s modulus at a given strain rate, which is also equal to the time-averaged Young’s modulus across the interphase region was obtained. The interphase Young’s modulus at a loading rate of 1 mN/s was determined to change from 1.4 GPa close to composite skin to 0.8 GPa close to the core. This work demonstrated the feasibility and effectiveness of nanoindentation-based interphase characterizations to be used as an input for the interphase stress distribution calculations, which can eventually enrich the design process of such sandwich composites. 
    more » « less
  4. ; ; ; (, MRS Advances)
    ABSTRACT Polydopamine (PDA) is a biopolymer, which can form uniform thin films on almost all solid substrates as well as at the liquid/air interface. Carbonized polydopamine possesses graphite-like structure and exhibits high electrical conductivity, which makes it a potential carbon-based thin film conductor. However, studies on mechanical behavior of PDA and its derived materials are very limited. In this study, PDA samples were synthesized through self-assembly of dopamine in aqueous solution. Elastic modulus of thin films was measured using the nanoindentation technique. It is shown that the Young’s modulus of PDA thin film increased with increasing heat treatment temperature (up to 600°C). Doping with Cu ions also increased the Young’s modulus of PDA. Furthermore, all PDA thin films, with and without Cu, exhibited creep behavior. 
    more » « less
  5. ; ; (, Science Advances)
    Since the invention of polymer networks such as cross-linked natural rubber in the 19th century, it has been a dogma that stiffer networks are less stretchable. We report a universal strategy for decoupling the stiffness and extensibility of single-network elastomers. Instead of using linear polymers as network strands, we use foldable bottlebrush polymers, which feature a collapsed backbone grafted with many linear side chains. Upon elongation, the collapsed backbone unfolds to release stored length, enabling remarkable extensibility. By contrast, the network elastic modulus is inversely proportional to network strand mass and is determined by the side chains. We validate this concept by creating single-network elastomers with nearly constant Young’s modulus (30 kilopascals) while increasing tensile breaking strain by 40-fold, from 20 to 800%. We show that this strategy applies to networks of different polymer species and topologies. Our discovery opens an avenue for developing polymeric materials with extraordinary mechanical properties. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email