An official website of the United States government
The Hikurangi margin of New Zealand exhibits contrasting slip behavior from south to north. Whereas the southern Hikurangi margin has a locked plate boundary that can potentially produce large megathrust earthquakes, the northern section of this margin accommodates plate motion by creep and recurring shallow slow-slip events. To investigate these different modes of slip we use marine seismic reflection data to image the reflectivity and seismic velocity structure along profiles across the accretionary wedge. Seismic veloc¬ity images up to 12 km deep and prestack depth migrations together charac¬terize the nature of incoming basement, sediment subduction and accretion, and faulting and compaction of the accretionary wedge. Our seismic velocity models show that a layer of sediment,with seismic wavespeeds of ~3.5 km/s, is entrained beneath the accretionary prism in the southern Hikurangi margin, but there is no coherent subducted sediment layer to the north. This is a significant result, because it implies that the sedi¬ment layer covers basement roughness and forms a smoother plate boundary in the south. In addition, the deepest sediments on the incoming plate in the southern Hikurangi margin are believed to be quartz-rich turbidites, which are prone to unstable slip along the plate boundary. In contrast, the accre¬tionary prism of the northern Hikurangi margin exhibits more variation in accretionary wedge thrust geometry due to interactions with large seamounts on the downgoing oceanic basement. These findings are consistent with the geodetically locked nature of a smooth, quartz-rich plate boundary along the southern Hikurangi subduction zone, and the creeping nature of a heteroge¬neous plate boundary along the Hikurangi margin to the north.
more »
« less
Evolving Sediment Structure and Lithospheric Architecture Across the Indo‐Burman Forearc Margin From the Joint Inversion of Surface‐ and Scattered‐Wave Seismic Constraints
Abstract The Indo‐Burman subduction zone represents a global endmember for extreme sediment accretion and is a region characterized by ambiguous tectonic structure. The recent collection of broadband seismic data across the Indo‐Burman accretionary margin as part of the Bangladesh‐India‐Myanmar Array (BIMA) experiment provides an opportunity to investigate the subsurface velocity structure across the incoming plate of an endmember subduction system. We construct a three‐dimensional model for seismic shear velocity using a joint inversion of surface‐ and scattered‐wave constraints. Rayleigh‐wave phase velocities measured from ambient‐noise (12–25 s) and teleseismic earthquakes (20–80 s) constrain absolute shear velocities, while we constrain the locations of and relative contrasts across significant discontinuities in the subsurface using observations from scattered‐wave imaging. From the resulting inversion, we observe two model classes that characterize the evolution of consolidation within the markedly slow uppermost sediments and metasediments along a predominantly southwest‐to‐northeast trend. We interpret variations in deeper seismic structure under two proposed scenarios: (a) a Moho of ∼21–26 km depth underlying a package of metasediments and a thinned basement component, with a slow mantle lithosphere (4.2 km/s) that may contain retained melt from the onset of India‐Antarctica seafloor spreading; or (b) a Moho of ∼51–59 km depth underlying a package of metasediments, basement, and a thick slug of mafic material, which may correspond to significant Kerguelen‐plume‐related underplating. By combining constraints from highly resolved phase‐velocity estimates and scattered‐wave images, we successfully characterize the lateral transitions across the Indo‐Burman forearc margin.
more »
« less
- Award ID(s):
- 1714892
- PAR ID:
- 10600104
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Solid Earth
- Volume:
- 130
- Issue:
- 6
- ISSN:
- 2169-9313
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
NA (Ed.)Abstract Four decades of seismic reflection, onshore‐offshore and ocean‐bottom seismic data are integrated to constrain a high‐resolution 3‐D P‐wave velocity model of the Hikurangi subduction zone. Our model shows wavespeeds in the offshore forearc to be 0.5–1 km/s higher in south Hikurangi than in the central and northern segments (VP ≤ 4.5 km/s). Correlation with onshore geology and seismic reflection data sets suggest wavespeed variability in the overthrusting plate reflects the spatial distribution of Late Jurassic basement terranes. The crustal backstop is 25–35 km from the deformation front in south Hikurangi, but this distance abruptly increases to ∼105 km near Cape Turnagain. This change in backstop position coincides with the southern extent of shallow slow‐slip, most of which occurs updip of the backstop along the central and northern margin. These relationships suggest the crustal backstop may impact the down‐dip extent of shallow conditional stability on the megathrust and imply a high likelihood of near/trench‐breaching rupture in south Hikurangi. North of Cape Turnagain, the more landward position of the backstop, in conjunction with a possible reduction in the depth of the brittle ductile transition, reduces the down‐dip width of frictional locking between the southern (∼100 km) and central Hikurangi margin by up‐to 50%. Abrupt transitions in overthrusting plate structure are resolved near Cook Strait, Gisborne and across the northern Raukumara Peninsula, and appear related to tectonic inheritance and the evolution of the Hikurangi margin. Extremely low forearc wavespeeds resolved north of Gisborne played a key role in producing long durations of long‐period earthquake ground motions.more » « less
-
The Hikurangi margin of New Zealand exhibits contrasting slip behavior from south to north. Whereas the southern Hikurangi margin has a locked plate boundary that can potentially produce large megathrust earthquakes, the northern section of this margin accommodates plate motion by creep and episodic shallow slow-slip events. To investigate these different modes of slip we examine the geometry of the plate boundary and consolidation state of the materials along the plate interface. We use marine seismic reflection data from the SHIRE project to image the reflectivity and seismic velocity structure along 20 profiles across the accretionary wedge of the Hikurangi subduction zone of New Zealand. These active-source seismic data were gathered in 2017 with the R/V Marcus Langseth using a 6,600 in3 seismic source and 12 km long receiver array. We carried out streamer tomography on the SHIRE profiles where we integrated seismic velocity constraints from stacking the reflection data along all SHIRE transects. The seismic velocity images and prestack depth migrations together characterize the nature of incoming basement, sediment subduction and accretion, and faulting and compaction of the accretionary wedge. Our seismic velocity models show that a layer of sediment,with seismic wavespeeds of ~3.0 km/s, is entrained beneath the accretionary prism in the southern Hikurangi margin, but there is no coherent subducted sediment layer to the north. This is a significant result, because it implies that the sediment layer covers basement roughness and forms a smoother plate boundary in the south. In addition, the deepest sediments on the incoming plate in the southern Hikurangi margin are believed to be quartz-rich turbidites, which are prone to unstable slip along the plate boundary. In contrast, the accretionary prism of the northern Hikurangi margin exhibits more variation in accretionary wedge thrust geometry due to interactions with large seamounts on the downgoing oceanic basement. These findings are consistent with the geodetically locked nature of a smooth, quartz-rich plate boundary along the southern Hikurangi subduction zone, and the creeping nature of a heterogeneous plate boundary along the Hikurangi margin to the north.more » « less
-
We utilized shear wave splitting analysis of teleseismic SKS, SKKS, and PKS phases to infer upper mantle deformational fabrics across a substantial area of Southeast Asia, where splitting measurements were previously limited. We used newly available permanent and temporary broadband seismic networks deployed across the Indo-Burma subduction zone and the eastern Indochina peninsula. The resulting 492 well-constrained splitting and 654 null measurements from 185 stations reveal clear large-scale patterns in the mantle deformational fabrics in response to the highly oblique active subduction and a large transform plate boundary. We identified two distinct domains of mantle deformation fabrics in the western Burma microplate and the eastern Indochina peninsula. In the former, trench parallel N-S fast polarization directions with an average lag time (δt) of 1.9 s are observed beneath the Indo-Burman Ranges. We suggest the observed splitting is partly due to anisotropy in the sub-slab region and relates to shear induced by the north moving Indian plate. The lithospheric fabric within the Indo-Burman Ranges and underlying subducting slab fabric contribute to produce the observed average δt of 1.9 s. The δt value decreases to an average of 1.0 s towards the back-arc until we reach the dextral Sagaing fault. In the second domain, starting approximately 100 km east of the Sagaing fault, we observe a consistent E-W fast direction with an average δt of 1.10 s in the eastern Shan-Thai and Indochina blocks. We interpret the E-W fabric as due to the deformation associated with the westward spreading of the Hainan mantle plume, possibly driven by overriding plate motion. Low velocities in the shallow mantle and late Cenozoic intraplate volcanism in this region support the plume-driven asthenospheric flow model in the Indochina peninsula. The sudden transition of the fast polarization direction from N-S to E-W along the eastern edge of the Burma microplate indicates the Sagaing fault acts as a mantle flow boundary between the subduction dominated trench parallel flow to the west and plume induced asthenospheric flow to the east. We also observed no net splitting beneath the Bengal basin which is most likely due to the presence of frozen vertical fabric resulting from the Kerguelen plume activity during Early Cretaceous.more » « less
-
Abstract A shallow sub‐seafloor seismic model that includes well‐determined seismic velocities and clarifies sediment‐crust discontinuities is needed to characterize the physical properties of marine sediments and the oceanic crust and to serve as a reference for deeper seismic modeling endeavors. This study estimates the seismic structure of marine sediments and the shallow oceanic crust of the Alaska‐Aleutian subduction zone at the Alaska Peninsula, using data from the Alaska Amphibious Community Seismic Experiment (AACSE). We measure seafloor compliance and Ps converted wave delays from AACSE ocean‐bottom seismometers (OBS) and seafloor pressure data and interpret these measurements using a joint Bayesian Monte Carlo inversion to produce a sub‐seafloor S‐wave velocity model beneath each available OBS station. The sediment thickness across the array varies considerably, ranging from about 50 m to 2.80 km, with the thickest sediment located in the continental slope. Lithological composition plays an important role in shaping the seismic properties of seafloor sediment. Deep‐sea deposits on the incoming plate, which contain biogenic materials, tend to have reduced S‐wave velocities, contrasting with the clay‐rich sediments in the shallow continental shelf and continental slope. A difference in S‐wave velocities is observed for upper oceanic crust formed at fast‐rate (Shumagin) and intermediate‐rate (Semidi) spreading centers. The reduced S‐wave velocities in the Semidi crust may be caused by increased faulting and possible lithological variations, related to a previous period of intermediate‐rate spreading.more » « less
