skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on July 20, 2026

Title: Defect Passivation via Dual‐Ligand Surface Modification for Bright and Stable Blue Emission in CsPbBr 3 Nanoplatelets
Abstract Achieving efficient and stable blue light‐emitting perovskite nanocrystals is a significant challenge for next‐generation optoelectronic devices. Here, a dual‐ligand surface engineering strategy is reported for quasi‐2D CsPbBr3nanoplatelets (NPLs) synthesized via ligand‐assisted reprecipitation. By synergistically co‐introducing didodecyldimethylammonium bromide to passivate bromine vacancies and hexylphosphonic acid to bind undercoordinated lead ions, the NPLs achieved a remarkable photoluminescence quantum yield of 93.7% and a narrow full‐width at half‐maximum of 19.27 nm. The enhanced photoluminescence (PL) lifetime (6.35 ns), reduced crystal disorder, slower bleach recovery kinetics, and improved thermal stability suggest that the suppressed non‐radiative pathways and strong exciton confinement (Eb = 141.76 meV) result from effective surface defect passivation and enhanced radiative recombination. Additionally, surface and structural characterizations confirmed the successful dual‐ligand integration and improved crystal integrity. The treated NPLs retained ∼57% PL under 450 min of ultraviolet (UV) light and ∼55% PL under 70% relative humidity, demonstrating strong UV and moisture stability. A prototype white light‐emitting device fabricated by integrating dual‐ligand‐treated NPLs achieves a wide color gamut (121% National Television System Committee, 90.4% ITU‐R Recommendation BT.2020), demonstrating their potential for high‐performance optoelectronics. This approach promotes defect suppression in low‐dimensional perovskites, paving the way for stable and efficient blue emitters.  more » « less
Award ID(s):
2430679 2227285
PAR ID:
10618041
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Publisher / Repository:
Wiley Advanced
Date Published:
Journal Name:
Advanced Optical Materials
ISSN:
2195-1071
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Energy Materials)
    Abstract Metal halide perovskite nanocrystals (NCs) have emerged as highly promising light emitting materials for various applications, ranging from perovskite light‐emitting diodes (PeLEDs) to lasers and radiation detectors. While remarkable progress has been achieved in highly efficient and stable green, red, and infrared perovskite NCs, obtaining efficient and stable blue‐emitting perovskite NCs remains a great challenge. Here, a facile synthetic approach for the preparation of blue emitting CsPbBr3nanoplatelets (NPLs) with treatment by an organic sulfate is reported, 2,2‐(ethylenedioxy) bis(ethylammonium) sulfate (EDBESO4), which exhibit remarkably enhanced photoluminescence quantum efficiency (PLQE) and stability as compared to pristine CsPbBr3NPLs coated with oleylamines. The PLQE is improved from ≈28% for pristine CsPbBr3NPLs to 85% for EDBESO4treated CsPbBr3NPLs. Detailed structural characterizations reveal that EDBESO4treatment leads to surface passivation of CsPbBr3NPLs by both EDBE2+and SO42–ions, which helps to prevent the coalescence of NPLs and suppress the degradation of NPLs. A simple proof‐of‐concept device with emission peaked at 462 nm exhibits an external quantum efficiency of 1.77% with a luminance of 691 cd m−2and a half‐lifetime of 20 min, which represents one of the brightest pure blue PeLEDs based on NPLs reported to date. 
    more » « less
  2. ; ; ; ; (, Advanced Functional Materials)
    Abstract This study presents the Br‐rich in situ synthesis of blue‐emitting 2D CsPbBr3nanoplatelets (NPLs) with various Br/Pb ratios using ZnBr2as a Br precursor to enhance Br ion adsorption significantly. This leads to effective passivation of surface defects, particularly Pb−Br bonds, by increasing the positive charge density around Pb atoms, thus creating a stable bonding environment and reducing defect formation. Consequently, the photoluminescence quantum yield (PLQY) improves from 31.15% for a Br/Pb ratio of 2 to 87.2% for a ratio of 6. NPLs with a Br/Pb ratio of 6 also exhibit longer lifetimes (16.69 ns) and slower bleach recovery dynamics, indicating fewer non‐radiative recombination pathways and effective exciton dynamics. Additionally, NPLs with the Br/Pb ratio of 6 demonstrated better thermal stability, with an activation energy of 124.3 meV, indicating stronger exciton binding. These NPLs also exhibited enhanced stability, with UV tolerance at 43.9% and water resistance at 23.8%, making them suitable for displays and lighting. Furthermore, Br‐passivated CsPbBr3NPLs are used as blue emitters in prototype white LEDs, achieving a wide color gamut, 126.6% of the National Television Standards Committee and 94.5% of Rec. 2020, demonstrating their potential for high‐quality lighting and advanced display technologies. 
    more » « less
  3. ; ; ; ; ; (, Advanced Functional Materials)
    Abstract Copper(I) halides are emerging as attractive alternatives to lead halide perovskites for optical and electronic applications. However, blue‐emitting all‐inorganic copper(I) halides suffer from poor stability and lack of tunability of their photoluminescence (PL) properties. Here, the preparation of silver(I) halides A2AgX3(A = Rb, Cs; X = Cl, Br, I) through solid‐state synthesis is reported. In contrast to the Cu(I) analogs, A2AgX3are broad‐band emitters sensitive to A and X site substitutions. First‐principle calculations show that defect‐bound excitons are responsible for the observed main PL peaks in Rb2AgX3and that self‐trapped excitons (STEs) contribute to a minor PL peak in Rb2AgBr3. This is in sharp contrast to Rb2CuX3, in which the PL is dominated by the emission by STEs. Moreover, the replacement of Cu(I) with Ag(I) in A2AgX3significantly improves photostability and stability in the air under ambient conditions, which enables their consideration for practical applications. Thus, luminescent inks based on A2AgX3are prepared and successfully used in anti‐counterfeiting applications. The excellent light emission properties, significantly improved stability, simple preparation method, and tunable light emission properties demonstrated by A2AgX3suggest that silver(I) halides may be attractive alternatives to toxic lead halide perovskites and unstable copper(I) halides for optical applications. 
    more » « less
  4. ; ; ; (, Advanced Materials Interfaces)
    Abstract Doping of CsPbBr3perovskite nanocrystals (PNCs) to achieve excellent material properties is accelerating due to their increasing use in optoelectronic devices. Herein, a novel composite of CsPbBr3PNCs with nickel thiocyanate Ni(SCN)2is reported, exhibiting stronger photoluminescence (PL) and more extended stability. The addition of Ni(SCN)2at different molar concentrations reduces the surface trap states of the host PNCs. Therefore, the microstrain, dislocation density, PL emission linewidth, and Urbach energy decrease, resulting in an increased photoluminescence quantum yield (PLQY) from 72% to high above 90%. When stored in the ambient atmosphere for 120 days, the PLQY of doped PNCs is maintained by more than four times compared to host PNCs. A combination of 3D‐printed conversion layers containing green‐, yellow‐, and red‐emitting doped PNCs with blue light‐emitting diodes results in stable white light with superior color qualities. Hence, new composites with desired properties are developed as an alternative to conventional color phosphors. 
    more » « less
  5. ; ; ; ; ; ; ; ; (, Advanced Functional Materials)
    Abstract All‐inorganic lead halide perovskite nanocrystals (NCs) have great optoelectronic properties with promising applications in light‐emitting diodes (LEDs), lasers, photodetectors, solar cells, and photocatalysis. However, the intrinsic toxicity of Pb and instability of the NCs impede their broad applications. Shell‐coating is an effective method for enhanced environmental stability while reducing toxicity by choosing non‐toxic shell materials such as metal oxides, polymers, silica, etc. However, multiple perovskite NCs can be encapsulated within the shell material and a uniform epitaxial‐type shell growth of well‐isolated NCs is still challenging. In this work, lead‐free vacancy‐ordered double perovskite Cs2SnX6(X = Cl, Br, and I) shells are epitaxially grown on the surface of CsPbX3NCs by a hot‐injection method. The effectiveness of the non‐toxic double perovskite shell protection is demonstrated by the enhanced environmental and phase stability against UV illumination and water. In addition, the photoluminescence quantum yields (PL QYs) increase for the CsPbCl3and CsPbBr3NCs after shelling because of the type I band alignment of the core/shell materials, while enhanced charge transport properties obtained from CsPbI3/Cs2SnI6core/shell NCs are due to the efficient charge separation in the type II core/shell band alignment. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email