Abstract Chlorinated plastics are part of the everyday lives of consumers and producers alike. They can be found in buildings, automobiles, fashion, packaging, and many other places. This prevalence makes them a considerable part of the plastic waste crisis. Interest in “upcycling” (as opposed to recycling) has grown recently to augment the possibilities of managing plastic waste. The advances made in plastic upcycling have focused on polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET) and polystyrene (PS) while chlorinated plastics, chiefly polyvinyl chloride (PVC), have received much less attention. The release of chlorine‐containing molecules during treatment of chlorinated plastic greatly complicates cross‐method upcycling, or even the treatment of plastic mixes containing chlorinated plastics. This review presents a case for extracting value from chlorinated plastics by highlighting appealing upcycling products made owing to, or despite, the C‐Cl bond via depolymerization, carbonization and modification. This article is protected by copyright. All rights reserved.
more »
« less
Small Molecules as Markers for Decoding Plastic-Related Information: A Focus on Polymer Composition
Although the relationship between plastics and their embedded small molecules has been previously hypothesized, direct and systematic evidence remains limited. Herein, we introduced an innovative approach to validate this relationship by screening specific small molecules as markers to decode plastic information. Given the mature techniques available for polymer identification, enabling subsequent validation, this study focused on screening polymer-specific small molecule markers. Specifically, plastic samples of various polymer types─including raw plastic pellets and postprocessed plastic products─were collected, extracted, and analyzed with a nontargeted method. Distinct polymer-based features were observed in raw plastic pellets: 21 in polyethylene (PE), 69 in polypropylene (PP), 119 in poly(ethylene terephthalate) (PET), and 14 in polystyrene (PS). Of these, 2, 28, 101, and 10 features were also detected in postprocessed plastic products of the same polymer, indicating these co-occurring features could serve as polymer-specific markers. Representative markers were identified, including Irganox 1010 transformation products in PP-based plastics, PET oligomers in PET-based plastics, and dibenzoylmethane in PS-based plastics. These markers were then used to identify the polymer type of two additional plastic bottles as PET, consistent with results obtained from pyrolysis-gas chromatography/mass spectrometry. This work provides a proof-of-concept for employing small molecule markers to decode plastic-related information.
more »
« less
- Award ID(s):
- 2404911
- PAR ID:
- 10621076
- Publisher / Repository:
- ACS
- Date Published:
- Journal Name:
- Environmental Science & Technology Letters
- ISSN:
- 2328-8930
- Subject(s) / Keyword(s):
- small molecules markers plastic polymer information nontargeted analysis organic contaminants
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Mid-infrared (MIR) spectroscopy enables accurate plastic classification, including challenging black plastics that evade traditional optical methods. However, our previous work using 1D spectral data revealed fundamental limitations in real-world conditions, with certain polymers consistently misidentified due to overlapping spectral signatures and environmental noise. This study advances polymer classification by transforming 1D MIR spectra into 2D scalogram representations using Continuous Wavelet Transform (CWT), extracting richer time frequency features that capture both spectral peaks and their scale-dependent characteristics. We developed a CNN architecture incorporating Inception modules, residual connections, and CBAM attention mechanisms specifically tailored for scalogram analysis. Systematic evaluation across multiple acquisition conditions from 10ms to 30ms per spectra, and achieved 99% accuracy across eight material categories (ABS, HDPE, PC, PET, PP, PS, PVC, plus conveyor background) while maintaining >500 fps processing on RTX 6000 Ada GPU. Validation on 100 unseen samples per class confirmed genuine polymer discrimination capabilities, with the model maintaining 99% accuracy on this independent test set. This 1D-to-2D transformation approach significantly enhances MIR spectroscopy's capability for rapid, accurate plastic characterization, establishing the foundation for advanced material analysis and quality control applications.more » « less
-
The global utilization of single-use, non-biodegradable plastics, such as bottles made of polyethylene terephthalate (PET), has contributed to catastrophic levels of plastic pollution. Fortu- nately, microbial communities are adapting to assimilate plastic waste. Previously, our work showed a full consortium of five bacteria capable of synergistically degrading PET. Using omics approaches, we identified the key genes implicated in PET degradation within the consortium’s pangenome and transcriptome. This analysis led to the discovery of a novel PETase, EstB, which has been observed to hydrolyze the oligomer BHET and the polymer PET. Besides the genes implicated in PET degradation, many other biodegradation genes were discovered. Over 200 plastic and plasticizer degradation-related genes were discovered through the Plastic Microbial Biodegradation Database (PMBD). Diverse carbon source utilization was observed by a microbial community-based assay, which, paired with an abundant number of plastic- and plasticizer-degrading enzymes, indicates a promising possibility for mixed plastic degradation. Using RNAseq differential analysis, several genes were predicted to be involved in PET degradation, including aldehyde dehydrogenases and several classes of hydrolases. Active transcription of PET monomer metabolism was also observed, including the generation of polyhydroxyalkanoate (PHA)/polyhydroxybutyrate (PHB) biopolymers. These results present an exciting opportunity for the bio-recycling of mixed plastic waste with upcycling potential.more » « less
-
Plastic upcycling, which involves making plastic-derived products with unique or improved properties from discarded plastic materials, is a promising alternative to recycling and disposal to help reduce the overall production of waste. However, recycled and reused materials typically have inferior mechanical, thermal, optical, and barrier properties compared with virgin plastics. Upcycled plastic materials could improve these properties while addressing future waste accumulation. In this study, we use waste poly(ethylene terephthalate) (PET) collected from disposable food packaging to create a repurposed plastic graphene oxide (GO) composite with a goal of upcycling. We developed a one-pot “dynamic depolymerization” to break down PET in the presence of GO and successfully enabled transesterification of the polymer onto GO. Covalent attachment of PET onto GO and tailorable plastic content was confirmed by thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. These covalent composites (PET-GO) were found to be relatively impermeable to water vapor, showing promise for applications in packaging materials. Aqueous degradation experiments on the composite materials demonstrated that, in bulk conditions, PET-GOs remain mechanically robust while in contact with water over appropriate time scales for packaging applications, while beginning to break down in accelerated conditions. The use of depolymerization methods to promote polymer grafting concurrently with polymer deconstruction could provide a more general method for grafting waste polymers onto oxidized carbonaceous substrates with further study.more » « less
-
Materials recovery facilities (MRFs) require new automated technologies if growing recycling demands are to be met. Current optical screening devices use visible (VIS) and near-infrared (NIR) wavelengths, frequency ranges that can experience challenges during the characterization of postconsumer plastic waste (PCPW) because of the overly-absorbing spectral bands from dyes and other polymer additives. Technological bottlenecks such as these contribute to 91% of plastic waste never actually being recycled. The mid-infrared (MIR) region has attracted recent attention due to inherent advantages over the VIS and NIR. The fundamental vibrational modes found therein make MIR frequencies promising for high fidelity machine learning (ML) classification. To-date, there are no ML evaluations of extensive MIR spectral datasets reflecting PCPW that would be encountered at MRFs. This study establishes quantifiable metrics, such as model accuracy and prediction time, for classification of a comprehensive MIR database consisting of five PCPW classes that are of economic interest: polyethylene terephthalate (PET #1), high-density polyethylene (HDPE #2), low-density polyethylene (LDPE #4), polypropylene (PP #5), and polystyrene (PS #6). Autoencoders, an unsupervised ML algorithm, were applied to the random forest (RF), k-nearest neighbor (KNN), support vector machine (SVM), and logistic regression (LR) models. The RF model achieved accuracies of 100.0% in both the C–H stretching region (2990–2820 cm −1 ) and molecular fingerprint region (1500–650 cm −1 ). The C–H stretching region was found to be free from additives that were responsible for misclassification in other regions, making it a fruitful frequency range for future PCPW sorting technologies. The MIR classification of black plastics and polyethylene PCPW using ML autoencoders was also evaluated for the first time.more » « less
An official website of the United States government

