An official website of the United States government
Abstract BackgroundIntraoperative 2D quantitative angiography (QA) for intracranial aneurysms (IAs) has accuracy challenges due to the variability of hand injections. Despite the success of singular value decomposition (SVD) algorithms in reducing biases in computed tomography perfusion (CTP), their application in 2D QA has not been extensively explored. This study seeks to bridge this gap by investigating the potential of SVD‐based deconvolution methods in 2D QA, particularly in addressing the variability of injection durations. PurposeBuilding on the identified limitations in QA, the study aims to adapt SVD‐based deconvolution techniques from CTP to QA for IAs. This adaptation seeks to capitalize on the high temporal resolution of QA, despite its two‐dimensional nature, to enhance the consistency and accuracy of hemodynamic parameter assessment. The goal is to develop a method that can reliably assess hemodynamic conditions in IAs, independent of injection variables, for improved neurovascular diagnostics. Materials and methodsThe study included three internal carotid aneurysm (ICA) cases. Virtual angiograms were generated using computational fluid dynamics (CFD) for three physiologically relevant inlet velocities to simulate contrast media injection durations. Time‐density curves (TDCs) were produced for both the inlet and aneurysm dome. Various SVD variants, including standard SVD (sSVD) with and without classical Tikhonov regularization, block‐circulant SVD (bSVD), and oscillation index SVD (oSVD), were applied to virtual angiograms. The method was applied on virtual angiograms to recover the aneurysmal dome impulse response function (IRF) and extract flow related parameters such as Peak Height PHIRF, Area Under the Curve AUCIRF, and Mean transit time MTT. Next, correlations between QA parameters, injection duration, and inlet velocity were assessed for unconvolved and deconvolved data for all SVD methods. Additionally, we performed an in vitro study, to complement our in silico investigation. We generated a 2D DSA using a flow circuit design for a patient‐specific internal carotid artery phantom. The DSA showcases factors like x‐ray artifacts, noise, and patient motion. We evaluated QA parameters for the in vitro phantoms using different SVD variants and established correlations between QA parameters, injection duration, and velocity for unconvolved and deconvolved data. ResultsThe different SVD algorithm variants showed strong correlations between flow and deconvolution‐adjusted QA parameters. Furthermore, we found that SVD can effectively reduce QA parameter variability across various injection durations, enhancing the potential of QA analysis parameters in neurovascular disease diagnosis and treatment. ConclusionImplementing SVD‐based deconvolution techniques in QA analysis can enhance the precision and reliability of neurovascular diagnostics by effectively reducing the impact of injection duration on hemodynamic parameters.
more »
« less
This content will become publicly available on July 15, 2026
Cerebral aneurysm hemodynamics indicative of instability are associated with heterogeneous wall motion measured by amplified MRI
BackgroundThe prediction of rupture in intracranial aneurysms is challenging. Aneurysm growth has been identified as a strong risk factor for rupture and aneurysm wall motion is a potential biomarker for growth, but visualizing aneurysm wall motion using conventional imaging techniques is difficult. Computational fluid dynamic simulations have been used to identify hemodynamic risk factors of intracranial aneurysm instability, but often lack observable and quantifiable biomechanical correlates that can be directly measured in vivo. MethodsIn this retrospective case–control study of matched patients, cohorts with growing (n=6) and stable (n=6) unruptured intracranial aneurysms were selected from our institutional database of 4D Flow MRI scans. The amplified Flow algorithm was used to extract maps of wall motion for each aneurysm. Hemodynamics within the aneurysm dome were calculated using established computational fluid dynamic methods, and hemodynamic variables were evaluated against wall motion for stable and growing aneurysms. ResultsSeveral hemodynamic variables were found to be both significant predictors of aneurysm growth and highly correlated with aneurysm wall motion. The hemodynamic variable most correlated with both the maximum value of aneurysm wall motion and spatial variance of aneurysm wall motion, the time coefficient of variance of the directional wall shear stress gradient (representing changing directions of wall shear stress), was also the best hemodynamic predictor of aneurysm growth. ConclusionsSpatial variance of wall motion and hemodynamic variables are increased in growing aneurysms, and the fluctuations in the directional wall shear stress correlate directly with wall motion, indicating that heterogeneous wall motion and hemodynamics are interrelated and play a critical role in aneurysm instability.
more »
« less
- Award ID(s):
- 2227232
- PAR ID:
- 10624123
- Publisher / Repository:
- BMJJournals
- Date Published:
- Journal Name:
- Journal of NeuroInterventional Surgery
- ISSN:
- 1759-8478
- Page Range / eLocation ID:
- jnis-2025-023486
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
ABSTRACT ObjectiveTortuous microvessels are characteristic of microvascular remodeling associated with numerous physiological and pathological scenarios. Three‐dimensional (3D) hemodynamics in tortuous microvessels influenced by red blood cells (RBCs), however, are largely unknown, and important questions remain. Is blood viscosity influenced by vessel tortuosity? How do RBC dynamics affect wall shear stress (WSS) patterns and the near‐wall cell‐free layer (CFL) over a range of conditions? The objective of this work was to parameterize hemodynamic characteristics unique to a tortuous microvessel. MethodsRBC‐resolved simulations were performed using an immersed boundary method‐based 3D fluid dynamics solver. A representative tortuous microvessel was selected from a stimulated angiogenic network obtained from imaging of the rat mesentery and digitally reconstructed for the simulations. The representative microvessel was a venule with a diameter of approximately 20 μm. The model assumes a constant diameter along the vessel length and does not consider variations due to endothelial cell shapes or the endothelial surface layer. ResultsMicrovessel tortuosity was observed to increase blood apparent viscosity compared to a straight tube by up to 26%. WSS spatial variations in high curvature regions reached 23.6 dyne/cm2over the vessel cross‐section. The magnitudes of WSS and CFL thickness variations due to tortuosity were strongly influenced by shear rate and negligibly influenced by tube hematocrit levels. ConclusionsNew findings from this work reveal unique tortuosity‐dependent hemodynamic characteristics over a range of conditions. The results provide new thought‐provoking information to better understand the contribution of tortuous vessels in physiological and pathological processes and help improve reduced‐order models.more » « less
-
null (Ed.)Mechanical forces are essential for proper growth and remodeling of the primitive pharyngeal arch arteries (PAAs) into the great vessels of the heart. Despite general acknowledgement of a hemodynamic-malformation link, the direct correlation between hemodynamics and PAA morphogenesis remains poorly understood. The elusiveness is largely due to difficulty in performing isolated hemodynamic perturbations and quantifying changes in-vivo. Previous in-vivo arch artery occlusion/ablation experiments either did not isolate the effects of hemodynamics, did not analyze the results in a 3D context or did not consider the effects of varying degrees of occlusion. Here, we overcome these limitations by combining minimally invasive occlusion experiments in the avian embryo with 3D anatomical models of development and in-silico testing of experimental phenomenon. We detail morphological and hemodynamic changes 24 hours post vessel occlusion. 3D anatomical models showed that occlusion geometries had more circular cross-sectional areas and more elongated arches than their control counterparts. Computational fluid dynamics revealed a marked change in wall shear stress-morphology trends. Instantaneous (in-silico) occlusion models provided mechanistic insights into the dynamic vessel adaptation process, predicting pressure-area trends for a number of experimental occlusion arches. We follow the propagation of small defects in a single embryo Hamburger Hamilton (HH) Stage 18 embryo to a more serious defect in an HH29 embryo. Results demonstrate that hemodynamic perturbation of the presumptive aortic arch, through varying degrees of vessel occlusion, overrides natural growth mechanisms and prevents it from becoming the dominant arch of the aorta.more » « less
-
Abstract Intracranial aneurysm rupture causes life-threatening sub-arachnoid hemorrhage. Current endovascular devices like coils, flow diverters, and intravascular implants aim to thrombose the aneurysm but have limitations and varying success rates depending on aneurysm characteristics. We propose a new computational framework integrating CFD and topology optimization to design personalized aneurysm implants. The optimization problem aims to reduce blood flow velocity within the aneurysm while ensuring adequate structural integrity of the implant. The fluid dynamics are governed by the Navier-Stokes equations, while the solid mechanics are described by the linear elasticity equations. A Darcy-Brinkman model is employed to simulate flow through the porous implant in the fluid domain, while the Solid Isotropic Material with Penalization (SIMP) method is used to interpolate between solid and void regions in the structural domain during topology optimization. The objective combines fluid energy dissipation ratio and solid strain energy with spatially varying weights. Global and local volume constraints generate personalized implants with porosity and flow-diverting architectures. The approach is demonstrated on patient-specific aneurysm geometries from rotational angiography. This CFD-driven topology optimization method enables personalized aneurysm implant design to potentially improve occlusion rates and reduce complications compared to current devices. Further studies will validate the optimized designs and investigate their efficacy in vitro and in vivo.more » « less
-
Currently, it is challenging to investigate aneurismal hemodynamics based on current in vivo data such as Magnetic Resonance Imaging or Computed Tomography due to the limitations in both spatial and temporal resolutions. In this work, we investigate the use of modal analysis at various resolutions to examine its usefulness for analyzing blood flows in brain aneurysms. Two variants of Dynamic Mode Decomposition (DMD): (i) Hankel-DMD; and (ii) Optimized-DMD, are used to extract the time-dependent dynamics of blood flows during one cardiac cycle. First, high-resolution hemodynamic data in patient-specific aneurysms are obtained using Computational Fluid Dynamics. Second, the dynamics modes, along with their spatial amplitudes and temporal magnitudes are calculated using the DMD analysis. Third, an examination of DMD analyses using a range of spatial and temporal resolutions of hemodynamic data to validate the applicability of DMD for low-resolution data, similar to ones in clinical practices. Our results show that DMD is able to characterize the inflow jet dynamics by separating large-scale structures and flow instabilities even at low spatial and temporal resolutions. Its robustness in quantifying the flow dynamics using the energy spectrum is demonstrated across different resolutions in all aneurysms in our study population. Our work indicates that DMD can be used for analyzing blood flow patterns of brain aneurysms and is a promising tool to be explored in in vivo.more » « less
