An official website of the United States government
Abstract Chalcogenide optical phase change materials (PCMs) have garnered significant interest for their growing applications in programmable photonics, optical analog computing, active metasurfaces, and beyond. Limited endurance or cycling lifetime is however increasingly becoming a bottleneck toward their practical deployment for these applications. To address this issue, a systematic study elucidating the cycling failure mechanisms of Ge2Sb2Se4Te (GSST) is performed, a common optical PCM tailored for infrared photonic applications, in an electrothermal switching configuration commensurate with their applications in on‐chip photonic devices. Further a set of design rules building on insights into the failure mechanisms is proposed, and successfully implemented them to boost the endurance of the Ge2Sb2Se4Te (GSST) device to over 67 000 cycles.
more »
« less
Solution-based processing of Ge 2 Sb 2 Se 4 Te optical phase change materials
Phase change materials (PCMs) are important building blocks in solid-state memory and photonic devices. Solution-based processing promises large-area, cost-effective, conformal coating of optical PCMs (O-PCMs) for photonic applications. In this work, a solution processing route was developed for Ge2Sb2Se4Te1(GSST), a target PCM of interest due to its large optical contrast, broadband transparency, and improved glass-forming capability. An alkahest solvent mixture of ethanedithiol and ethylenediamine was used as a solvent system to fabricate solution-derived GSST thin films and films from these solutions were prepared and characterized using SEM, XRD, and Raman spectroscopy.
more »
« less
- Award ID(s):
- 2225967
- PAR ID:
- 10626753
- Publisher / Repository:
- Optical Materials Express
- Date Published:
- Journal Name:
- Optical Materials Express
- Volume:
- 14
- Issue:
- 12
- ISSN:
- 2159-3930
- Page Range / eLocation ID:
- 2874
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Optoelectronics are crucial for developing energy‐efficient chip technology, with phase‐change materials (PCMs) emerging as promising candidates for reconfigurable components in photonic integrated circuits, such as nonvolatile phase shifters. Antimony sulfide (Sb2S3) stands out due to its low optical loss and considerable phase‐shifting properties, along with the non‐volatility of both phases. This study demonstrates that the crystallization kinetics of Sb2S3can be switched from growth‐driven to nucleation‐driven by altering the sample dimension from bulk to film. This tuning of the crystallization process is critical for optical switching applications requiring control over partial crystallization. Calorimetric measurements with heating rates spanning over six orders of magnitude, reveal that, unlike conventional PCMs that crystallize below the glass transition, Sb2S3exhibits a measurable glass transition prior to crystallization from the undercooled liquid (UCL) phase. The investigation of isothermal crystallization kinetics provides insights into nucleation rates and crystal growth velocities while confirming the shift to nucleation‐driven behavior at reduced film thicknesses—an essential aspect for effective device engineering. A fundamental difference in chemical bonding mechanisms was identified between Sb2S3, which exhibits covalent bonding in both material phases, and other PCMs, such as GeTe and Ge2Sb2Te5, which demonstrate pronounced bonding alterations upon crystallization.more » « less
-
Abstract The performance of large‐area perovskite solar cells (PSCs) has been assessed for typical compositions, such as methylammonium lead iodide (MAPbI3), using a blade coater, slot‐die coater, solution shearing, ink‐jet printing, and thermal evaporation. However, the fabrication of large‐area all‐inorganic perovskite films is not well developed. This study develops, for the first time, an eco‐friendly solvent engineered all‐inorganic perovskite ink of dimethyl sulfoxide (DMSO) as a main solvent with the addition of acetonitrile (ACN), 2‐methoxyethanol (2‐ME), or a mixture of ACN and 2‐ME to fabricate large‐area CsPbI2.77Br0.23films with slot‐die coater at low temperatures (40–50 °C). The perovskite phase, morphology, defect density, and optoelectrical properties of prepared with different solvent ratios are thoroughly examined and they are correlated with their respective colloidal size distribution and solar cell performance. The optimized slot‐die‐coated CsPbI2.77Br0.23perovskite film, which is prepared from the eco‐friendly binary solvents dimethyl sulfoxide:acetonitrile (0.8:0.2 v/v), demonstrates an impressive power conversion efficiency (PCE) of 19.05%. Moreover, the device maintains ≈91% of its original PCE after 1 month at 20% relative humidity in the dark. It is believed that this study will accelerate the reliable manufacturing of perovskite devices.more » « less
-
Abstract In this work, we explore how the optical properties of isotropic materials can be modulated by adjacent anisotropic materials, providing new insights into anisotropic light-matter interactions in van der Waals heterostructures. Using a WS2/ReS2heterostructure, we systematically investigated the excitation angle-dependent photoluminescence (PL), differential reflectance, time-resolved PL, and power-dependent PL anisotropy of WS2. Our findings reveal that the anisotropic optical response of WS2, influenced by the crystallographically low symmetry and unique dielectric environment of ReS2, significantly impacts both the optical and temporal behavior of WS2. We observed that the emission anisotropy increases with optical power density, highlighting that anisotropic localization of photo-generated carriers and subsequent charge transfer dynamics are key contributors to the polarization-sensitive optical response. These findings provide a framework for leveraging optical density-sensitive anisotropy mirroring to design advanced anisotropic optoelectronic and photonic devices.more » « less
-
Abstract Hyperbolic metamaterials (HMM) possess significant anisotropic physical properties and tunability and thus find many applications in integrated photonic devices. HMMs consisting of metal and dielectric phases in either multilayer or vertically aligned nanocomposites (VAN) form are demonstrated with different hyperbolic properties. Herein, self‐assembled HfO2‐Au/TiN‐Au multilayer thin films, combining both the multilayer and VAN designs, are demonstrated. Specifically, Au nanopillars embedded in HfO2and TiN layers forming the alternative layers of HfO2‐Au VAN and TiN‐Au VAN. The HfO2and TiN layer thickness is carefully controlled by varying laser pulses during pulsed laser deposition (PLD). Interestingly, tunable anisotropic physical properties can be achieved by adjusting the bi‐layer thickness and the number of the bi‐layers. Type II optical hyperbolic dispersion can be obtained from high layer thickness structure (e.g., 20 nm), while it can be transformed into Type I optical hyperbolic dispersion by reducing the thickness to a proper value (e.g., 4 nm). This new nanoscale hybrid metamaterial structure with the three‐phase VAN design shows great potential for tailorable optical components in future integrated devices.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1364/OME.542387
