An official website of the United States government
Abstract The low friction nature of articular cartilage has been attributed to the synergistic interaction between lubricin and hyaluronic acid in the synovial fluid (SF). Lubricin is a mucinous glycoprotein that lowers the boundary mode coefficient of friction of articular cartilage in a dose‐dependent manner. While there have been multiple attempts to produce recombinant lubricin and lubricin mimetic cartilage lubricants over the last two decades, these materials have not found clinical use due to challenges associated with large scale production, manufacturing, and purification. Recently, a novel method using codon scrambling was developed to produce a stable, full‐length bioengineered equine lubricin (eLub) in large reproducible quantities. While preliminary frictional analysis of eLub and other recombinantly produced forms revealed they can lubricate cartilage, a complete tribological characterization is lacking, with previous studies evaluating the friction coefficient only at a single dose or a single speed. The objective of this study was to analyze the dose‐dependent tribological properties of eLub using the Stribeck framework of tribological analysis. Recombinantly produced eLub at doses greater than 1.5 mg/mL exhibits friction coefficients on par with healthy bovine SF, and a maximal 5 mg/mL dose exhibits a nearly 50% lower friction coefficient than healthy SF. eLub also modulates the shift in lubrication mode of the cartilage from the high friction boundary mode to the low friction minimum mode at high concentrations.
more »
« less
This content will become publicly available on December 1, 2025
Ti3C2T and Mo2TiC2T MXenes as additives in synovial fluids - towards an enhanced biotribological performance of 3D-printed implants
Synovial joints, critical for limb biomechanics, rely on sophisticated lubrication systems to minimize wear. Disruptions, whether from injury or disease, often necessitate joint replacements. While additive manufacturing offers personalized implants, ensuring wear resistance remains a challenge. This study delves into the potential of Ti3C2Tx and Mo2TiC2Tx nanosheets in mitigating wear of additively manufactured cobalt-chromium tungsten alloy substrates when incorporated as additives into synovial fluid. The colloidal solutions demonstrate an excellent stability, a crucial factor for reproducible assays and potential clinical applicability. Analysis of contact angles and surface tensions reveals MXene-induced alterations in substrate wettability, while maintaining their general hydrophilic character. Viscosity analysis indicates that MXene addition reduces the dynamic viscosity, particularly at higher concentrations above 5 mg/mL, thus enhancing dispersion and lubrication properties. Friction and wear tests demonstrate a dependency on the MXene concentration, while Ti3C2Tx exhibits stable friction coefficients and up to 77 % wear reduction at 5 mg/mL, which was attributed to the formation of a wear-protecting tribo-film (amorphous carbon and MXene nano-sheets). Our findings suggest that Ti3C2Tx, when supplied in favorable concentrations, holds promise for reducing wear in biotribological applications, offering avenues for future research into optimizing MXene utilization in load-bearing joint replacements and other biomedical devices.
more »
« less
- Award ID(s):
- 2419026
- PAR ID:
- 10627549
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Applied Materials Today
- Volume:
- 41
- Issue:
- C
- ISSN:
- 2352-9407
- Page Range / eLocation ID:
- 102464
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
van Wijnen, Andre (Ed.)Synovial fluid is composed of hyaluronan and proteoglycan-4 (PRG4 or lubricin), which work synergistically to maintain joint lubrication. In diseases like osteoarthritis, hyaluronan and PRG4 concentrations can be altered, resulting in lowered synovial fluid viscosity, and pro-inflammatory cytokine concentrations within the synovial fluid increase. Synovial fibroblasts within the synovium are responsible for contributing to synovial fluid and can be targeted to improve endogenous production of hyaluronan and PRG4 and to alter the cytokine profile. We cyclically loaded SW982 synoviocytes to 0%, 5%, 10%, or 20% strain for three hours at 1 Hz. To assess the impact of substrate stiffness, we compared the 0% strain group to cells grown on tissue culture plastic. We measured the expression of hyaluronan turnover genes, hyaluronan localization within the cell layer, hyaluronan concentration, PRG4 concentration, and the cytokine profile within the media. Our results show that the addition of cyclic loading increased HAS3 expression, but not in a magnitude-dependent response. Hyaluronidase expression was impacted by strain magnitude, which is exemplified by the decrease in hyaluronan concentration due to cyclic loading. We also show that PRG4 concentration is increased at 5% strain, while higher strain magnitude decreases overall PRG4 concentration. Finally, 10% and 20% strain show a distinct, more pro-inflammatory cytokine profile when compared to the unloaded group. Multivariate analysis showed distinct separation between certain strain groups in being able to predict strain group, hyaluronan concentration, and PRG4 concentration from gene expression or cytokine concentration data, highlighting the complexity of the system. Overall, this study shows that cyclic loading can be used tool to modulate the endogenous production of hyaluronan, PRG4, and cytokines from synovial fibroblasts.more » « less
-
Abstract Inflammation of the synovium, known as synovitis, plays an important role in the pathogenesis of osteoarthritis (OA). Synovitis involves the release of a wide variety of pro‐inflammatory mediators in synovial fluid (SF) that damage the articular cartilage extracellular matrix and induce death and apoptosis in chondrocytes. The composition of synovial fluid is dramatically altered by inflammation in OA, with changes to both hyaluronic acid and lubricin, the primary lubricating molecules in SF. However, the relationship between key biochemical markers of joint inflammation and mechanical function of SF is not well understood. Here, we demonstrate the application of a novel analytical framework to measure the effective viscosity for SF lubrication of cartilage, which is distinct from conventional rheological viscosity. Notably, in a well‐established equine model of synovitis, this effective lubricating viscosity decreased by up to 10,000‐fold for synovitis SF compared to a ~4 fold change in conventional viscosity measurements. Further, the effective lubricating viscosity was strongly inversely correlated (r = −0.6 to −0.8) to multiple established biochemical markers of SF inflammation, including white blood cell count, prostaglandin E2(PGE2), and chemokine ligand (CCLs) concentrations, while conventional measurements of viscosity were poorly correlated to these markers. These findings demonstrate the importance of experimental and analytical approaches to characterize functional lubricating properties of synovial fluid and their relationships to soluble biomarkers to better understand the progression of OA.more » « less
-
Interactions between molecules in the synovial fluid and the cartilage surface may play a vital role in the formation of adsorbed films that contribute to the low friction of cartilage boundary lubrication. Osteoarthritis (OA) is the most common degenerative joint disease. Previous studies have shown that in OA-diseased joints, hyaluronan (HA) not only breaks down resulting in a much lower molecular weight (MW), but also its concentration is reduced ten times. Here, we have investigated the structural changes of lipid-HA complexes as a function of HA concentration and MW to simulate the physiologically relevant conditions that exist in healthy and diseased joints. Small angle neutron scattering and dynamic light scattering were used to determine the structure of HA-lipid vesicles in bulk solution, while a combination of atomic force microscopy and quartz crystal microbalance was applied to study their assembly on a gold surface. We infer a significant influence of both MW and HA concentrations on the structure of HA-lipid complexes in bulk and assembled on a gold surface. Our results suggest that low MW HA cannot form an amorphous layer on the gold surface, which is expected to negatively impact the mechanical integrity and longevity of the boundary layer and could contribute to the increased wear of the cartilage that has been reported in joints diseased with OA.more » « less
-
We report the design of a diblock copolymer with architecture and function inspired by the lubricating glycoprotein lubricin. This diblock copolymer, synthesized by sequential reversible addition–fragmentation chain-transfer polymerization, consists of a cationic cartilage-binding domain and a brush-lubricating domain. It reduces the coefficient of friction of articular cartilage under boundary mode conditions (0.088 ± 0.039) to a level equivalent to that provided by lubricin (0.093 ± 0.011). Additionally, both the EC 50 (0.404 mg/mL) and cartilage-binding time constant (7.19 min) of the polymer are comparable to purified human and recombinant lubricin. Like lubricin, the tribological properties of this polymer are dependent on molecular architecture. When the same monomer composition was evaluated either as an AB diblock copolymer or as a random copolymer, the diblock effectively lubricated cartilage under boundary mode conditions whereas the random copolymer did not. Additionally, the individual polymer blocks did not lubricate independently, and lubrication could be competitively inhibited with an excess of binding domain. This diblock copolymer is an example of a synthetic polymer with lubrication properties equal to lubricin under boundary mode conditions, suggesting its potential utility as a therapy for joint pathologies like osteoarthritis.more » « less
